Cuckooland Harry MG 7733 User manual

Harry High Rise
Assembly Instructions

www.cuckooland.com | [phone]

Model : MG 7733
Product Size : 920mm x 1930mm (Base Int Size)
Page : 2 of 35
TOP TIPS BEFORE YOU START !
1. Please check that all parts & hardware are present before you start the assembly of your furniture.
2. For ease and speed of assembly, we recommend that before you commence each step of the assembly,
3. We recommend that where possible, all items are assembled near to the area in which they will be placed in use,
4. For the protection of your furniture, particularly items of high gloss finish, we recommend that the product is placed on a
5. During assembly please take care not to over-tighten any fittings, as this may damage the product.
CARE AND MAINTENANCE OF YOUR FURNITURE
Please periodically check all fittings and re-tighten as necessary.
To clean your item, please use a damp cloth and wipe clean.
Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to warp or finishes to de-laminate.
Please do not place hot items (e.g hot drinks) directly on the wood surface.
Please do not drag or pull your furniture.
IMPORTANT INFORMATION
1. Thickness of mattress should not exceed 184mm.
2. Children should be discouraged from playing on top of this bunk bed.
3. The bunk bed should be checked periodically by the owner to ensure that the guardrail, ladder, and other components
4. A bunk bed is not to be placed near a ceiling fan unless the distance between the closest points on the ceiling fan bunk
5. Use guardrails on both sides of upper bunk.
6. Prohibit horseplay on or under bed(s).
7. Prohibit more than one person on upper bunk.
8. Use Ladder for entering and leaving upper bunk.
9. If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against
STRANGULATION HAZARD:
19. Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not
Bed is at lest 2 metres.
are maintained in the correct position and state of repair and that all connectors are tight.
The wall to prevent entrapment between the bed and the wall.
Please identify all the parts required for that step.
to avoid moving the product unnecessarily once assembled.
Protected surface during assembly to prevent any damage.
limited to hook, belt and jump ropes.
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE
10. WARNING Do not use the bunk bed/high bed if any struclural part is broken or missing.
11. Ventilation of the room is necessary in order to keep the humidity low and to prevent mould in and around the bed.
12. WARNING "high beds & the upper bed of bunk beds are not suitable for children under six years due to risk of injury from falls";
13. WARNING "children can become trapped between the bed & the wall, a roof pitch, the ceiling, adjoining pieces of furniture (e.g.cupboard)
and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining structure shall not exceed 75mm
nor shall be more than 230mm"
14. always follow the manufacturer's instruction;
15. Recommended Mattress Size : 90cm x 190cm (UK Single) with Maximum Depth of 18.4cm
16. This item conforms to European Safety Standards - BS EN 747-1 : 2012 + A1 : 2015 & BS EN 747-2 : 2012 + A1 : 2015
17. WARNING "Bunk beds and high beds can present a serious risk of injury from strangulation if not used correctly. Never attach or hang
items to any part of the bunk bed that are not designed to be used with the bed, for example, but not limited to ropes, strings, cords,
hooks, belts and bags"
18. High beds and the upper bed of bunk beds is suitable for a maximum mattress thickness of 184mm. The top of mattress must not come
above the line marked on the bed.
www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

Part List
Model : MG 7733
Page : 4 of 35
No. Pcs No. Part Name
01
02
Carton 4 of 5 Pcs
Part Name
Carton 1 of 5
Carton 2 of 5
1
11
Back Panel (Right)08 1
19
03 1
12 1
13 1
04 1
06 1
Plinth Panel (Wardrobe)
07
05
2
1
18 1
Back Panel (Wardrobe)
1
15
21
41 1
28 1
29 1
30 1
38 1
Right End Panel (Back)
Carton 3 of 5
39 1
43 1
5
42
Support Panel (Wardrobe)
Side Front Panel (Upper)
Side Panel (Back)
14 1
20 1
Bottom Panel (Wardrobe)
Support Panel (Wardrobe)
Bottom Panel (Ladder)
Left Panel (1st Step Ladder)
Back Panel (Left)
Side Front Panel
Back Side Rail
Front Side Rail
Back Panel
10 1
16 1
32 1 Back Panel (Drawer) Carton 5 of 5 117
22 1
1
23 1
27
1
1
31
Left Panel (Desk)
2nd Ladder Step
Left Ladder Panel
Back Panel (Ladder)
15 1Back Panel
Support Panel
Right End Panel (Front)
Left Panel (Wardrobe)
Support Rail
Top Panel (Desk)
144 Hanging RailRight Panel (1st Step Ladder)
Top Panel (1st Step Ladder)
33 1 Left Panel (Drawer)
34 1 Right Panel (Drawer)
35 1 Bottom Panel (Drawer)
36 1 Front Panel (Drawer)
37 1 Support Panel (Drawer)
Assembly Instructions + Fitting List
1
LVL Slats
Wire Mesh Frame
Ladder Support Rail
24
25
26
3rd Ladder Step
4th Ladder Step
1
Right Ladder Panel 1
Side Panel (Left)
www.cuckooland.com | [phone]

Part List
Model : MG 7733
Page : 5 of 35
02
01
12 13
14
16
17
18
19
15
21
23
24
25
27
31
32
33
34
35
36
39
38
03
05
06
07
08
10
26
28
29
30
41
04
20
43
37
07
LVL Slats x15
22
44
42 x 5
www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]

www.cuckooland.com | [phone]