Cuisinart BFP603U User manual

2 in 1 Prep & Blend
BFP603U

3
Congratulations on your purchase of the Cuisinart 2 in 1 Prep and Blend.
For over 30 years Cuisinart’s aim has been to produce the very finest kitchen
equipment.
All Cuisinart products are engineered for exceptionally long life, and
designed to be easy to use as well as to give excellent performance day
after day.
To learn more about Cuisinart products, visit our website
www.cuisinart.co.uk.

4
Contents
Product Description........................................................................................................... 5
Safety Cautions.................................................................................................................. 6
Using the Blender Attachment......................................................................................... 9
A Fitting the Glass Jar &Blade Assembly.................................................................................... 9
B Removing the Jar &Blade Assembly ........................................................................................ 9
C Blending .........................................................................................................................................10
Hints &Tips...................................................................................................................... 11
Blender Cleaning &Maintenance ..................................................................................12
Using the Food Processor Attachment ..........................................................................13
A Fitting the Work Bowl, Blade &Lid .........................................................................................13
B Fitting the Reversible Slicing &Grating Disc .......................................................................13
C Fitting the Whipping/Emulsifying Disc...................................................................................14
Processing.........................................................................................................................14
A Using the Chopping Blade ......................................................................................................14
B Adding Ingredients while Processing .....................................................................................14
C Using the Slicing/Grating Disc ..................................................................................................15
D Using the Whipping/Emulsifying Disc.....................................................................................15
Hints &Tips......................................................................................................................15
Food Processor Cleaning &Maintenance......................................................................17
UK Guarantee &After Sales Service .............................................................................18
Recipes..............................................................................................................................19
Lid
1.75L
Glass Jar

5
Contents
Product Description........................................................................................................... 5
Safety Cautions.................................................................................................................. 6
Using the Blender Attachment......................................................................................... 9
A Fitting the Glass Jar &Blade Assembly.................................................................................... 9
B Removing the Jar &Blade Assembly ........................................................................................ 9
C Blending .........................................................................................................................................10
Hints &Tips...................................................................................................................... 11
Blender Cleaning &Maintenance ..................................................................................12
Using the Food Processor Attachment ..........................................................................13
A Fitting the Work Bowl, Blade &Lid .........................................................................................13
B Fitting the Reversible Slicing &Grating Disc .......................................................................13
C Fitting the Whipping/Emulsifying Disc...................................................................................14
Processing.........................................................................................................................14
A Using the Chopping Blade ......................................................................................................14
B Adding Ingredients while Processing .....................................................................................14
C Using the Slicing/Grating Disc ..................................................................................................15
D Using the Whipping/Emulsifying Disc.....................................................................................15
Hints &Tips......................................................................................................................15
Food Processor Cleaning &Maintenance......................................................................17
UK Guarantee &After Sales Service .............................................................................18
Recipes..............................................................................................................................19
Product Description Pusher
Lid
Chopping/Mixing
Blade
Whipping/
Emulsifying Disc
Grating/Slicing
Disc
1L Work Bowl
and Collar
Stem
Adapter
Measuring Cap
Lid
1.75L
Glass Jar
Base Unit

6
Safety Cautions
Always follow these safety cautions when using this appliance to avoid personal
injury or damage to the appliance.
This appliance should be used only as described within this instruction book. Please keep
this instruction book for future reference.
nEnsure all packaging materials and any promotional labels or stickers are removed from
the blender before first use.
nAlways inspect the appliance before use for noticeable signs of damage. Do not use
if damaged, or if the appliance has been dropped. In the event of damage, or if the
appliance develops a fault, contact the Cuisinart Customer Care Line (see “UK After
Sales Service” section).
nDo not use this appliance if the lead is damaged. In the event of lead damage
discontinue use immediately. If the lead is damaged it must be replaced with a special
lead available from the manufacturer or its service agent (see “UK After Sales Service”
section).
nUnplug from the mains when not in use and before cleaning. To disconnect, press the
‘ON/OFF’ switch, and then remove the plug from the mains.
nRemove the glass jar/work bowl from the appliance before emptying the contents.
nWARNING: Never put your fingers inside the glass jar/work bowl and never touch the
blades when the appliance is plugged in.
nAvoid contact with moving parts.
nAlways ensure that the blade/disc has stopped turning before removing the lid.
nDo not operate the appliance without food contents in the work bowl/glass jar.
nWhen blending hot liquids in the Blender, remove measuring cap to allow steam to
escape.
nThis appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
nChildren should always be supervised to ensure that they do not play with this product.
nAlways store the blades/disc out of reach of children where they can not accidently
be touched
nDo not use any accessories or attachments with this appliance other than those
recommended by Cuisinart.

7
nTo protect against fire, electric shock or personal injury, do not immerse cord, plug or
unit in water or other liquids.
nDo not leave the lead hanging over the edge of a kitchen table or worktop. Avoid
contact between the lead and hot surfaces.
nFor indoor use only.
nFor domestic use only.
nDo not immerse the housing base in water or in any other liquids or put into a
dishwasher.
nThis appliance should be used only for preparation of drinks / food as described within
the instructions for use that accompany it. Please retain these instructions for future
reference.
nAlways ensure that your hands are dry before removing the plug from the mains outlet.
Never pull the plug out of the mains outlet by its lead.
nTo avoid injury or possible fire, do not cover the appliance when in use.
nDo not connect this appliance to an external timer or remote control system.
nThis appliance complies with the basic requirements of Directives 2004/108/EEC
(Electromagnetic Compatibility) and 2006/95/EEC (Safety of domestic electrical
appliances).
WARNING: Polythene bags over the product or packaging may be dangerous. To avoid
danger of suffocation, keep away from babies and children. These bags are not toys.

8
UK Wiring Instructions
nYour Cuisinart 2 in 1 Prep &Blend includes a BS 13 amp moulded (fused) mains plug
on the supply cord.
nShould it be necessary at any stage to remove this moulded plug and replace it with a
re-wireable BS 13 amp mains plug, the re-wiring should be completed as follows: (NB
The moulded plug should be disposed of safely)
Class I (1) Earthed Appliance
The wires in the mains lead are coloured in accordance with the following code:
GREEN &YELLOW = EARTH
BLUE = NEUTRAL BROWN = LIVE
nThe wire which is coloured GREEN and YELLOW must be connected to the terminal in
the plug which is marked with the letter E or symbol.
nThe wire which is coloured BLUE must be connected to the terminal which is marked
with the letter N.
nThe wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L.
With this appliance, if a 13 amp plug is used, a 13 amp fuse should be fitted. If any other
type of plug is used, a 10 amp fuse must be fitted, either in the plug or at the distribution
board.
WARNING: A cut off plug inserted into a 13 amp socket is a serious safety (shock)
hazard. Ensure that the cut off plug is disposed of safely.
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be handed over to an appropriate collection
point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. For more detailed information about the
recycling of this product, please contact your local council office or your household waste
disposal service.

9
Using the Blender Attachment
A. Fitting the Glass Jar & Blade Assembly
nTurn the glass jar upside down and place it flat on a
sturdy surface
nPosition the rubber gasket on the round opening on the
bottom of the glass jar
nTurn the blade assembly upside down and place through
the opening of the glass jar, the blades should now be
inside the glass jar
nSecure the rubber gasket and blade assembly into
position by placing the smaller opening of the locking
collar on top of the blade assembly. To lock, twist the
locking collar in a clockwise direction until it is firmly in
place. Once assembled, turn the glass jar right side up
N.B. Take extra care when handling the blade assembly as they are very sharp
nPush the lid onto the glass jar and fit the measuring cap into the lid
N.B. The lid should always be in place while the unit is switched on
nPlace the housing base on a flat, dry, sturdy surface and position the complete jar
unit on the motor housing so that the jar markings are facing you and the handle is
positioned to one side.
nPlug the appliance into a suitable mains outlet, the Blender is now ready to use
B Removing the Jar &Blade Assembly
nSwitch the appliance off and unplug from the mains outlet
nLift the complete glass jar up and away from the housing base
N.B Never twist the glass jar when removing it from the housing unit, lift the complete
glass jar directly upwards
nRemove the lid and measuring cap and carefully pour out the contents of the glass jar
nTurn the jar unit upside down and place on a flat sturdy surface. Twist the locking collar
in an anti –clockwise direction to loosen and lift away from the glass jar
nCarefully remove the blade assembly by holding the edges of the plastic disc and lift
up, away from the glass jar
nRemove the rubber seal
N.B Take care not to misplace the rubber seal as the glass jar will not seal properly
without it

10
C Blending
ON/OFF
Once the ON/OFF button is pressed the red LED indicator light will illuminate and flash
indicating the appliance is switched on but no speed setting has been selected. The ON/
OFF button must be pressed before any speed setting can be selected.
HIGH &LOW
nPress the ON/OFF button, the red LED indicator light will illuminate and flash
nPress the HIGH or LOW button to determine the speed at which you would like to blend
the ingredients.
nThe Blender will now be functioning at the desired speed
N.B It is possible to switch the speeds without pressing the ON/OFF button simply by
selecting another speed
ICE CRUSH
The Blender is powerful enough to crush ice without liquid using any speed setting
however for your convenience we have pre-set the best speed for ice crushing
nPlace desired amount of ice cubes into the glass jar
nPress the ON/OFF button, the red LED indicator light will illuminate and flash
nPress the ICE CRUSH button until ice is crushed to desired consistency
PULSE
The pulse setting allows you to create a quick burst of power for quick, efficient blending.
The pulse setting can be used to break larger pieces of food or to control texture of food
when blending
nPress the ON/OFF button, the red LED indicator light will illuminate and flash
nPress the PULSE button and the red LED indicator light will illuminate
nPress and release the desired speed setting, repeat as needed
When finished blending press the ON/OFF button and unplug the blender from the mains
outlet.
ACTUAL SIZE