Cuisinart 562775 Smart Stick User manual

Smart Stick®Two Speed
Hand Blender
After washing the hand
blender parts, align the
motor body (a) with
blending attachment (b)
and push the pieces
together until they click.
To use the chopper
grinder attachment,
connect the motor body
(a) to the top of the
chopper/grinder
attachment cover (c).
Push the two pieces
together until they click.
Place the motor housing
with the chopper/grinder
attachment cover (d) onto
the top of the prep bowl
(e). Be sure notches on
cover (f) line up with ridges
on bowl (g).
Rotate cover clockwise until the pins are in
the far left position in the slots and cover is
secured to the prep bowl.
1.
3. 4.
2.
a.
c.
QUICK START GUIDE
Hand Blender Attachments and Setup
b.
a.
See reverse side for whisk attachment and outlet plug in.
d.
f.
g.
e.

Hand Blender Attachments and Setup
To use the whisk attachment,
connect the motor body (a) to
the whisk attachment (h).
Push the two together until
they click and are secure.
Plug the unit into the outlet when you
have assembled the attachment of
your choice.
5. 6.
PG-26926
Smart Stick®Two Speed Hand Blender
These helpful hints are intended to be a supplement to the Instruction
Booklet. In order to ensure safe operation and optimum performance,
please read the entire Instruction Booklet.
IMPORTANT!
Do not throw away these instructions. Read before operating
your new SmartStick®Two Speed Hand Blender.
Keep for future reference.
a.
h.