Current WHR1 User manual

WHR1 Quick Start Guide
The IR Transmitter / Receiver is located at
the top of the remote. Aim the transmitter
at the desired device while commissioning.
IR Transmitter / Receiver.
The full-color LCD backlit display enhances
the intuitive interface, making images and
text easy to read.
LCD Backlit Screen
The simple layout of the control pad makes
navigation easy, while its design and
material nish provide comfort during use.
Control Pad.
Battery Indicator
Control Graphics
More info on reverse
Meet your new WHR1
Turning your WHR1 on (and o!)
To power on your WHR1, simply press
any region of the control pad for at least
1 second.
Powering On
To power o your device, press and hold
the CENTER button for at least 2 seconds.
Alternatively, the device will automatically
power o after 4 minutes of inactivity.
Powering O
2
1
WHR1 Quick Start Guide

LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
(Rev 06/19/23)
DT133-Daintree-ONE-WHS20-WHR1-QuickStar-Guide_R01
Navigating controls3
Common Actions4
Replacing Batteries5
Use the UP, DOWN, LEFT,
and RIGHT directions to
navigate menus.
Use the CENTER button
to enter editable features
such as dimming levels.
The WHR1 is navigated
through text menus using
the LEFT, RIGHT, UP and
DOWN buttons
Use the CENTER button to
“highlight” a sub-setting.
Then use UP, DOWN, LEFT,
and RIGHT to modify it.
Use the CENTER button to
“highlight” a setting. Then
use LEFT and RIGHT to
modify it.
Custom proles can be
saved, edited, deleted and
utilized through the Saved
Prole List.
Saved ProlesQuick EditDetailed EditMenu
The WHR1 is powered by 2x AA
batteries (included beneath the
packaging insert).
When replacing batteries, use a
quality Alkaline or Lithium battery.
Customer Support
T [phone], option 2
E [email protected]