Curtis GSG Series User manual

GSG Series
Automatic Coffee Grinder
USER GUIDE
READ AND SAVE THESE INSTRUCTIONS
NOTICE TO INSTALLER: Please leave this booklet with the machine.
øøøøø /$
'$(4('30/5$07&3 'SFW/$

CONTENTS CL51
.H\)HDWXUHV6SHFLÀFDWLRQV6\VWHP5HTXLUHPHQWV..............................................................................................FS51
,PSRUWDQW6DIHJXDUGV............................................................................................................................................... IS3
,QVWDOODWLRQ,QVWUXFWLRQV.............................................................................................................................................II24
2SHUDWLQJ,QVWUXFWLRQV ............................................................................................................................................OI38
&OHDQLQJ,QVWUXFWLRQV..............................................................................................................................................CI22
5RXJK,Q'UDZLQJ................................................................................................................................................. 5'
,OOXVWUDWHG3DUWV5HFRPPHQGHG3DUWV.................................................................................................................... ,3
(OHFWULFDO6FKHPDWLFV ............................................................................................................................................(6
7URXEOHVKRRWLQJ*XLGH ..........................................................................................................................................7*
3URGXFW:DUUDQW\....................................................................................................................................................3:
Contact Information
Wilbur Curtis Co., Inc.
6913 Acco Street | Montebello, CA 90640 US
Phone: [phone] | Toll Free: 800-421-6150
Email: [email protected] | Web: www.wilburcurtis.com
'PSUIFMBUFTUTQFDJmDBUJPOTBOEJOGPSNBUJPOHPUPXXXXJMCVSDVSUJTDPN
5PMM'SFF].POEBZ'SJEBZA.M.- 4:00 P.M.PT
Email: [email protected]
%VFUPDPOUJOVFEQSPEVDUJNQSPWFNFOUUIFQSPEVDUTJMMVTUSBUFEQIPUPHSBQIFEJOUIJTHVJEFNBZWBSZTMJHIUMZGSPNUIFBDUVBMQSPEVDU
(4($0/5&/54-*45øø  030818NC

KEY FEATURES/SPECIFICATIONS/SYSTEM REQUIREMENTS FS51
Key Features
• Easy to Use - Fully automatic operation.
• -BSHF(SJOEJOH#VSST1SPWJEFGBTUFSNPSFFGmDJFOUPQFSBUJPO
• Highly Accurate and Consistent Throw - For even distribution, dust reduction.
• Constant, uniform grind.
• Powerful 1/2 hp Motor - Equipped with safety circuit breaker.
6SHFLÀFDWLRQV6HOHFWHG0RGHOV
(OHFWULFDO6XSSO\5HTXLUHPHQWV
02'(/ '(6&5,37,21 3+$6( 92/76 $036 :,5( :$776 +(57=
*6*%/. Coffee Grinder Single 1 PH 120 V 8.0 A 2W + G 960 W 50/60 Hz
(;3257
*6*%/. Coffee Grinder Single, Export 1 PH 230 V 4.0 A 2W + G 920 W 50/60 Hz
'LPHQVLRQV
02'(/ +(,*+7 :,'7+ '(37+ 6+,3:(,*+7 6+,3&8%(
*6*%/. 25.63”
[65.1 cm]
7.22”
[18.3 cm]
15.07”
[38.3 cm]
52.0 lbs
[23.6 kg]
4.36 cu. ft.
[0.132m3]
(;3257
*6*%/. 25.63”
[65.1 cm]
7.22”
[18.3 cm]
15.07”
[38.3 cm]
52.0 lbs
[23.6 kg]
4.36 cu. ft.
[0.132m3]
GSG, KEY FEATURES/SPECS/SYSTEM REQUIREMENTS 092619A

IMPORTANT SAFEGUARDS IS3
Symbols
This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
DANGER - Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING - Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION - Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE - Indicates a situation which, if not avoided, could result in property damage.
IMPORTANT - Provides information and tips for proper operation.
SANITATION REQUIREMENTS
Important Safeguards/Conventions
WARNING:
• Make sure that this appliance is installed and grounded according to the INSTALLATION
*/4536$5*0/4CZRVBMJmFEQFSTPOOFMCFGPSFBUUFNQUJOHUPVTFJU'BJMVSFUPGPMMPXUIF*/45"--"5*0/
INSTRUCTIONS could result in personal injury or void the warranty.
• This appliance is designed for commercial use. Any service other than cleaning and preventive
maintenance should be performed by an authorized Wilbur Curtis service technician.
• 5PSFEVDFUIFSJTLPGmSFPSFMFDUSJDTIPDL%0/05PQFOUIFTFSWJDFQBOFMT5IFSFBSFOPVTFS
serviceable parts inside.
• Clean the appliance completelyCFGPSFVTJOHJUGPSUIFmSTUUJNFBDDPSEJOHUPUIF$-&"/*/(
*/4536$5*0/4$MFBOJUSFHVMBSMZBTJOTUSVDUFEJOUIF$-&"/*/(*/4536$5*0/4
• Use this appliance only for its intended use, grinding coffee.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
• Avoid spillage onto the power (mains) connector.
(3*/%&34*.1035"/54"'&(6"3%44:.#0-4 $
WARNING - 5IJTQSPEVDUDBOFYQPTFZPVUPDIFNJDBMTJODMVEJOH"DSZMBNJEFBOE#JTQIFOPM"#1"
which are known to the State of California to cause cancer and birth defects or other reproductive harm.
'PSNPSFJOGPSNBUJPOWJTJUXXX18BSOJOHTDBHPW

IMPORTANT SAFEGUARDS IS3
(3*/%&34*.1035"/54"'&(6"3%44:.#0-4 $
CE Requirements
• This appliance must be installed in locations where it can be overseen by trained personnel.
• 'PSQSPQFSPQFSBUJPOUIJTBQQMJBODFNVTUCFJOTUBMMFEXIFSFUIFUFNQFSBUVSFJTCFUXFFO¡$UP¡$
• This appliance is not suitable for outdoor use.
• "QQMJBODFTIBMMOPUCFUJMUFENPSFUIBO¡GPSTBGFPQFSBUJPO
• "OFMFDUSJDJBONVTUQSPWJEFFMFDUSJDBMTFSWJDFBTTQFDJmFEJODPOGPSNBODFXJUIBMMMPDBMBOEOBUJPOBMDPEFT
'PSTBGFVTFBOBMMQPMFEJTDPOOFDUJPONVTUCFJODPSQPSBUFEJOUPUIFmYFEXJSJOHJOBDDPSEBODFXJUIUIF
XJSJOHSVMFTPVUMJOFEJODMBVTFPG*&$GPSNFFUJOHUIFNJOJNVNFMFDUSJDBMTBGFUZPGUIJTTUBOEBSE
• This appliance must not be cleaned by water jet.
• 5IJTBQQMJBODFDBOCFVTFECZQFSTPOTBHFEGSPNZFBSTBOEBCPWFJGUIFZIBWFCFFOHJWFOTVQFSWJTJPOPS
instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
• ,FFQUIFBQQMJBODFBOEJUTDPSEPVUPGSFBDIPGDIJMESFOBHFEMFTTUIBOZFBST
• "QQMJBODFTDBOCFVTFECZQFSTPOTZFBSTBOEBCPWFXJUISFEVDFEQIZTJDBMTFOTPSZPSNFOUBMDBQBCJMJUJFT
or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• $IJMESFOVOEFSUIFBHFPGZFBSTTIPVMECFTVQFSWJTFEUPFOTVSFUIFZEPOPUQMBZXJUIUIFBQQMJBODF
• If the power cord is ever damaged, it must be replaced by the manufacturer or authorized service personnel
with a special cord available from the manufacturer or its authorized service personnel in order to avoid a
hazard.
• Machine must not be immersed for cleaning.
• $MFBOJOHBOEVTFSNBJOUFOBODFTIBMMOPUCFNBEFCZDIJMESFOVOMFTTUIFZBSFPMEFSUIBOZFBSTBOE
supervised.
• This appliance is intended to be used in household and similar applications such as:
 oTUBGGLJUDIFOBSFBTJOTIPQTPGmDFTBOEPUIFSXPSLJOHFOWJSPONFOUT
 oCZDMJFOUTJOIPUFMTNPUFMTBOEPUIFSSFTJEFOUJBMUZQFFOWJSPONFOUT
– bed and breakfast type environments.
• This appliance not intended to be used in applications such as:
– farm houses
• Access to the service areas permitted by Authorized Service personnel only.
• 5IF"8FJHIUFETPVOEQSFTTVSFMFWFMJTCFMPXE#"

INSTALLATION INSTRUCTIONS II24
Installation Instructions
Installation Requirements
• A secure surface capable of supporting the weight of the appliance.
• For units without an attached cord set: Appropriately sized, UL listed, grounding type power cable to meet
UIFFMFDUSJDBMTQFDJmDBUJPOTGPSUIFBQQMJBODF*GZPVIBWFRVFTUJPOTBCPVUUIFDPSSFDUDBCMFTJ[FBOEMFOHUI
DPOTVMUBRVBMJmFEJOTUBMMFS*GUIFBQQMJBODFXJMMCFIBSEXJSFEUPBKVODUJPOCPYUIFQPXFSDBCMFNVTUCFMPOH
enoughTPUIBUUIFVOJUDBOCFNPWFEGPSDMFBOJOHVOEFSOFBUI
• "HSPVOEFEFMFDUSJDBMDPOOFDUJPOUPBOFMFDUSJDBMDJSDVJUUIBUNFFUTUIFFMFDUSJDBMTQFDJmDBUJPOTPGUIF
appliance (see SPECIFICATIONS5IFDJSDVJUNVTUCFQSPUFDUFECZUIFBQQSPQSJBUFTJ[FEDJSDVJUCSFBLFS*G
ZPVBSFOPUDFSUBJOUIBUUIFFYJTUJOHDJSDVJUNFFUTUIFSFRVJSFNFOUTGPSZPVSVOJUDPOTVMUBMJDFOTFEFMFDUSJDJBO
WARNING:*OTUBMMBUJPOJTUPCFQFSGPSNFEPOMZCZBRVBMJmFEJOTUBMMFS
WARNING: *NQSPQFS FMFDUSJDBM DPOOFDUJPO NBZ SFTVMU JO BO FMFDUSJD TIPDL IB[BSE 5IJT HSJOEFS NVTU CF
properly grounded.
IMPORTANT:0CTFSWFBMMHPWFSOJOHDPEFTBOEPSEJOBODFT
(3*/%&3(&/&3*$*/45"--"5*0/*/4536$5*0/4 "
Leveling
 1PTJUJPOUIFVOJUPOBMFWFMDPVOUFSUPQ-FWFMJUMFGUUP
right and front to back by turning the bottom of the
legs.
WARNING:6TFUIFMFWFMJOHMFHTUPMFWFMUIF
HSJOEFSPOMZ%POPUVTFUIFNUPBEKVTUHSJOEFS
IFJHIU%POPUFYUFOEUIFNIJHIFSUIBO
necessary.
Style varies
Style
varies
Back of
unit
Connecting the Power Plug (units with pre-installed
power cord that with be plugged into a power receptacle)
2 *GOPUBMSFBEZJOTUBMMFEJOTUBMMUIFBQQSPQSJBUFUZQFPG
QPXFSQMVHGPSZPVSMPDBMJUZ$POTVMUMPDBMFMFDUSJDBM
DPEFTUPEFUFSNJOFUIFBQQSPWFEUZQFPGQPXFSQMVH
for your region.
continued...

INSTALLATION INSTRUCTIONS II24
(3*/%&3(&/&3*$*/45"--"5*0/*/4536$5*0/4 "
Connecting the Power Cord to A Junction Box
(units with pre-installed power cord, if applicable)
3 *GUIFQPXFSDPSEXJMMCFDPOOFDUFEEJSFDUMZUPUIF
KVODUJPOCPYDPOOFDUUIFQPXFSDBCMFXJSFTUPUIF
UFSNJOBMTJOUIFKVODUJPOCPY4FFUIFELECTRICAL
SCHEMATICGPSUIFQPXFSTVQQMZSFRVJSFNFOUT
WARNING:5VSOPGGQPXFSUPUIFKVODUJPOCPYBU
the circuit breaker panel before connecting the
power cable. Lock out and tag the circuit
breaker.
WARNING:$POOFDU UIFQPXFS DPSEPOMZUP UIF
BQQSPQSJBUFUZQFBOETJ[FFMFDUSJDBMPVUMFU*GUIF
electrical outlet is not compatible with the power
DPSEIBWFJUVQHSBEFECZBMJDFOTFEFMFDUSJDJBO
%P OPU NPEJGZ UIF QPXFS QMVH %P OPU VTF BO
FYUFOTJPO DPSE %P OPU VTF B QPXFS DPSEQMVH
that is damaged.
Style
varies
Back of
unit
Power cable from grinder
Connect the Power Cable
4 On units with a power connector on the back panel,
DPOOFDUB$*&$QPXFSDPSEOPUTVQQMJFE
compatible with the electrical outlet installed in the
GBDJMJUZBOEUIBUNFFUTTQFDJmDBUJPOT
5 $POOFDUUIFQPXFSDPSEUPUIFBQQSPQSJBUFUZQFPG
electrical outlet.
6 Turn on the circuit breaker supplying power to the
FMFDUSJDBMPVUMFUPSKVODUJPOCPY

OPERATING INSTRUCTIONS OI38
(4401&3"5*/(*/4536$5*0/4øø /$
2 Open the hopper lid and
mMMXJUIGSFTIXIPMFDPGGFF
CFBOT
3 Close the lid
4 7SHJLHJVɈLLIHN
underneath the spout and lift
[OLIHN\WPU[VP[
5 1SFTTUIFHSFFO45"35
CVUUPO5IFHSJOEFSXJMMTUBSU
UPHSJOEDPGGFFJOUPUIFCBH
1 ;\YU[OLZLSLJ[VYRUVI[V[OL
KLZPYLKNYPUK
6 8IFOHSJOEJOHJTmOJTIFE
MPXFSUIFCBHUPTUPQUIF
NPUPSPSQSFTTUIFSFE
4501CVUUPO
Grinding Coffee
The grinder is factory preset for optimal performance.

OPERATING INSTRUCTIONS OI38
(4401&3"5*/(*/4536$5*0/4øø /$
2 5VSOUIFTFMFDUPSLOPC
BMMUIFXBZDMPDLXJTF
&413&440QPTJUJPO
 -PDBUFUIFUXPTFUTDSFXT
VOEFSUIFTFMFDUPSLOPC6TF
BOUIJODIIFYXFODIUP
MPPTFOUIFTDSFXTPOFUVSO
FBDI3FNPWFUIFLOPC
4 3FDPOOFDUQPXFSBOESVO
UIFHSJOEFS6TJOHBnBU
CMBEFTDSFXESJWFSUVSOUIF
BEKVTUNFOUTDSFXTMPXMZ
DMPDLXJTFVOUJMZPVIFBSUIF
HSJOEJOHCVSSTNBLJOHB
DMJDLJOHOPJTFUIFOCBDLPGG
UIFTDSFXUIUVSODPVOUFS
DMPDLXJTF
5 3FJOTUBMMUIFLOPC
&413&440QPTJUJPO
 %JTDPOOFDUUIFQPXFSDPSE
BOESFNPWFUIFCFBOTGSPN
UIFIPQQFS
Adjusting the Grind Texture
5IFHSJOEFSDBOCFBEKVTUFEUPNBLFUIFHSPVOEDPGGFFNPSFmOFPSNPSFDPVSTF"EKVTUJOHUIFHSJOEFSNBZBGGFDU
UIFPVUQVUWPMVNFTPHSJOEJOHNBZUBLFTMJHIUMZMPOHFSPSTIPSUFSUIBOCFGPSF
Set screws
Adjustment
screw

NOTICE -Do not use cleaning liquids, compounds or powders containing chlorine (bleach) or corrosives.
5IFTFQSPEVDUTQSPNPUFDPSSPTJPOBOEXJMMEBNBHFUIFmOJTIFT USE OF THESE PRODUCTS WILL VOID
THE WARRANTY.
CLEANING INSTRUCTIONS CI22
Cleaning the Grinder - As Needed
GRINDER, CLEANING INSTRUCTIONS 013018NC
WARNING: Disconnect the power cord before cleaning.
WARNING: DO NOT immerse the grinder in water or any other liquid. Avoid spilling liquid into the grind
housing during cleaning.
1 Disconnect the power cord.
2 Brush coffee grounds from the dispensing spout. Wipe off the surrounding area.
3 Prepare a mild cleaning solution of dish washing liquid in warm water. Wipe exterior surfaces with a cloth
moistened with the cleaning solution.
4 Dry the exterior surfaces with a clean soft cloth. Polish exterior stainless steel surfaces with stainless steel
polish.
5 Reconnect the power cord.
A tablet style grinder cleaner may be used to clean the inside of the grind housing, the burrs and the chute. It will
BMTPFMJNJOBUFUBTUFBOEPEPSMFGUJOUIFHSJOEFSGSPNHSJOEJOHnBWPSFEDPGGFF
1 With the power cord disconnected, remove the coffee beans from the hopper.
2 Plug the power cord into the electrical outlet.
3 Place a container under the grind spout and run the grinder to empty the housing of all coffee.
4 Pour grinder cleaner granules or tablets into the hopper, according to the manufacturer’s recommendations.
5 Press the grind button. Run the grinder until the cleaner empties completely from the spout.
6 3FmMMUIFHSJOEFSXJUIXIPMFCFBODPGGFFBOESVOUXPHSJOEDZDMFTUPQVSHFUIFHSJOEIPVTJOHPGSFTJEVBM
cleaner.

ROUGH-IN DRAWINGS RD57
25 5/8"
15 1/8"
12 1/4"
7" 4 7/8"
7 1/4"
GSG
GSG, ROUGH-IN DRAWING 030118NC
25.63 in
[65.1 cm]
7.25 in
[18.4 cm]
12.30 in
[31.2 cm]
15.07 in
[38.3 cm]
4.93 in
[12.5 cm]
7.00 in
[17.8 cm]

ILLUSTRATED PARTS/RECOMMENDED PARTS IP95
GSG, ILLUSTRATED PARTS/RECOMMENDED PARTS 070318A
2
10
7
11
14
GSG - Main Chassis - Exploded View
9
5
6
14
14
13
12A
12B
3A
3B
4
8
1
See Grinder
Motor Assembly
A

ILLUSTRATED PARTS LIST IP95
GSG, ILLUSTRATED PARTS/RECOMMENDED PARTS 070318A
ITEM # PART # DESCRIPTION
1 WC-149 SWITCH, PUSHBUTTON (GREEN)120V N.O.
2WC-38036 LABEL, SW PANEL GSG
3A WC-131241HARNESS ASSY GSG-3BLK/RED
3B WC-134162HARNESS ASSY, GSG-31
4 WC-150 SWITCH, PUSHBUTTON (RED) 120V N.O.
5 WC-6487 LEVER, BAG SWITCH GSG
6 WC-151 SWITCH, MICRO GSG
7 WC-7012TRANSFORMER, 60VA PRIMARY 208/240/480V
SEC 120V
ITEM # PART # DESCRIPTION
8 WC-435 RELAY, 120V 3POLE 15A USE ON GRINDERS
9 WC-1504 BREAKER, CIRCUIT 10A 120/250 VAC
10 WC-9177 DRAWER, GSG
11 WC-1408 CORD GRIP, 7/8” O.D.
12A WC-12001CORD, 14/3 SJTO 6’ BLK W/PLUG
12B WC-1203-1022CORD, 16A SJT 6’ BLK W/CONNECT ORS GEM-
5N-30
13 CA-1044 BUMPER, BUTTON BLACK
14 WC-4426 SCREW, 8-32x3/8 PH HEAD TRUSS
GSG - Main Chassis - Parts List
ITEM # PART # DESCRIPTION
8 WC-435 RELAY, 120V 3POLE 15A USE ON GRINDERS
Recommended Parts to Stock
1DOMESTIC UNITS, 2EXPORT UNITS

ILLUSTRATED PARTS/RECOMMENDED PARTS IP95
GSG, ILLUSTRATED PARTS/RECOMMENDED PARTS 070318A
ITEM # PART # DESCRIPTION
1 WC-9170 COVER, HOUSING
2A WC-91351MOTOR, SLICING GRINDER ASSY 120V SLG/DHG/
ILGD/ILGS/SHG**
2B WC-910622MOTOR, SLICING GRNDR ASSY 220V**
3 WC-91026 CAPACITOR, COFFEE GRINDER ASSY SLG/DHG/
ILGD
4 WC-9109 DRIVE, SHEAR DHG,SHG,SLG,ILGD
5 WC-9107-6* DISC, SHEAR COFFEE GRINDER 6PK
6 WC-39046 LABEL, SELECTOR KNOB GSG
7 WC-91050 BURR, COMPLETE SET SLICING
8 WC-9106 SPRING, TENSION COFFEE GRINDER
9 WC-91051 FEEDWORM, SLICING GSG (INCLUDES ITEM 7)
ITEM # PART # DESCRIPTION
10 WC-4826 SCREW, 10-32 UNFx3/8 L BINDER HEAD CAP
SCREW
11 WC-4613 SCREW, 5/16-18x1” SLOT PAN HD
12 WC-9175 SPRING, DETENT
13 WC-9174 CAP, SPRING DETENT
14 WC-39045 LABEL, SELECTOR RING GSG
15 WC-9199 SCREW, ADJUSTING ASSY GSG
16 WC-9172 RING, DETENT GSG
17 WC-4512 SCREW, 10-32x3/8 PAN HEAD (1000PK)
18 WC-4309 WASHER, #10, FLAT SS .20 ID x .44 OD x .06 THICK
19 WC-9171 KNOB, SELECTOR
20 WC-4832 SCREW, 1/4-20x1” SET SLOTED SS CUP POINT
Grinder Motor Assembly
5
4
9
3
Grinder Motor Assembly - Parts List
8
10
2A
2B
7
6
20
14
11
12
13
19
15
16
18
17
1DOMESTIC UNITS, 2EXPORT UNITS
*Recommended parts to stock
**Includes items 3, 4, 5, 7, 8, 9 and 10
1

ELECTRICAL SCHEMATICS ES94
(4(&-&$53*$"-4$)&."5*$4ø A
Model Voltage
V
Amps
A
WaƩs
W
Hertz
Hz
# of Conductor
Wires Phase
220 3.8 841
230 4.0 920
240 4.2 1001
ELECTRICAL RATING TABLE
106x13-KLB3-GSG2

WARNING: Electric Shock Hazard - the procedures in this TROUBLESHOOTING GUIDE are to be
QFSGPSNFEPOMZCZBRVBMJmFETFSWJDFUFDIOJDJBO%JTDPOOFDUQPXFSXIFOSFQMBDJOHDPNQPOFOUT/FJUIFS
8JMCVS$VSUJT$P*ODOPSUIFTFMMFSDBOCFIFMESFTQPOTJCMFGPSUIFJOUFSQSFUBUJPOPGUIJTJOGPSNBUJPOPSBOZ
MJBCJMJUZJODPOOFDUJPOXJUIJUTVTF
Troubleshooting Guidelines
• 5IJTUSPVCMFTIPPUJOHHVJEFJEFOUJmFTTPNFCVUOPUBMMPGUIFQPTTJCMFDBVTFTGPSDPNNPOQSPCMFNTUIBUDBO
PDDVS
• Use this TROUBLESHOOTING GUIDEBMPOHXJUIUIFBQQSPQSJBUFELECTRICAL SCHEMATIC.
Grinder Does Not Grind Coffee - Motor Does Not Run
1 $IFDLUPNBLFTVSFUIBUUIFQPXFSDPSEJTDPOOFDUFEBOEUIBUUIFDJSDVJUCSFBLFSDPOOFDUFEUPUIFFMFDUSJDBMPVUMFU
JTOPUPGGPSUSJQQFE
2 $IFDLUIFDJSDVJUCSFBLFSPOUIFCBDLPGUIFVOJU1VTIJOPOUIFCVUUPOUPSFTFU*GUIFCVUUPOQPQTCBDLPVUXIFO
ZPVUSZUPTUBSUUIFHSJOEFSDIFDLGPSFMFDUSJDBMTIPSUTJOTJEFUIFVOJUGPSFYBNQMFBTIPSUFENPUPS
3 $IFDLGPS7BDBDSPTTQJOTi#wBOEiwPOUIFSFMBZ*GUIFSFMBZJTOPUHFUUJOHQPXFSUSBDFCBDLXBSETGSPNUIF
SFMBZUPUIFQPXFSDPSEVTJOHUIFELECTRIC SCHEMATICUPmOEUIFXJSFPSDPNQPOFOUUIBUJTQSFWFOUJOHUIFSFMBZ
GSPNHFUUJOHQPXFS
4 *GUIFSFMBZJTHFUUJOHQPXFSQSFTTUIFTUBSUTXJUDIBOEDIFDLGPSQPXFSBDSPTTSFMBZUFSNJOBMTi#wBOEiw*GUIFSFJT
QPXFSPVUPGUIFSFMBZHPUPTUFQ
5 *GUIFSFJTQPXFSJOUPUIFSFMBZCVUOPQPXFSPVUXIFOUIFTUBSUTXJUDIJTQSFTTFEDIFDLUIFTUBSUTXJUDIBOETXJUDIXJSJOH
IBSOFTT"MTPDIFDLUIFCBHTXJUDIBOEUIFTUPQTXJUDI5IFTUPQTXJUDITIPVMECFOPSNBMMZDMPTFE*GJUJTOPUUIFHSJOEFS
XJMMOPUGVODUJPO*GUIFTXJUDIFTBOEXJSJOHIBSOFTTBSF0,SFQMBDFUIFSFMBZ
 *GUIFSFJTQPXFSBDSPTTSFMBZUFSNJOBMTi#wBOEiwXIFOUIFTUBSUTXJUDIJTQSFTTDIFDLGPSQPXFSBUUIFJOQVU
UFSNJOBMTPGUIFNPUPS*GUIFSFJTQPXFSBUUIFJOQVUUFSNJOBMTPGUIFNPUPSCVUJUEPFTOPUSVOFJUIFSUIFNPUPS
DBQBDJUPSPSUIFNPUPSJUTFMGJTEFGFDUJWF
Grinder Does Not Grind Coffee - Motor Runs
1 %JTDPOOFDUQPXFSBOEDIFDLUPNBLFTVSFUIFGVOOFMGFFEJOHCFBOTJOUPUIFHSJOEFSJTOPUDMPHHFEKBNNFE
2 $IFDLGPSBCSPLFOTIFBSEJTL4FFReplacing a Broken Shear DiskPOUIFGPMMPXJOHQBHF
Coffee Too Course or Too Fine
1 %JTDPOOFDUQPXFSBOEDIFDLUPNBLFTVSFUIFHSJOEFSNPUPSIPVTJOHDPWFSJTPOTUSBJHIUBOEQSPQFSMZTFBUFE
2 5SZBEKVTUJOHUIFHSJOEJOHCVSST4FFAdjusting the Grind TextureJOUIFOPERATING INSTRUCTIONS*GBEKVTUJOH
UIFHSJOEJOHCVSSTEPFTOPUXPSLUIFHSJOEJOHCVSSTNBZCFXPSOBOESFRVJSFSFQMBDFNFOU
TROUBLESHOOTING GUIDE TG28
(4(5306#-&4)005*/((6*%&       ø "

TROUBLESHOOTING GUIDE TG28
Replacing a Broken Shear Disk
1 6OQMVHUIFQPXFSDPSE
2 &NQUZUIFDPGGFFCFBOTPVUPGUIFIPQQFS
3 -PDBUFUIFUXPTFUTDSFXTVOEFSUIFTFMFDUPSLOPC6TJOHBUIJODIIFYXFODIMPPTFOUIFTDSFXTPOFUVSO
BOESFNPWFUIFLOPC
4 3FNPWFUIFIPVTJOHDPWFSIFMEJOQMBDFCZUXPTMPUUFETDSFXT
5 5BLFPGGUIFTIFBSDBQ
 1VMMPVUUIFGFFEXPSNCVSSBTTFNCMZ
7 3FNPWFBOEEJTDBSEUIFCSPLFOTIFBSEJTL
 $MFBOPVUUIFIPVTJOH-PPLGPSBOESFNPWFBOZEFCSJTUIBUNBZIBWFKBNCFEUIFCVSSTDBVTJOHUIFTIFBS
EJTLUPCSFBL
 3FJOTFSUUIFGFFEXPSNCVSSBTTFNCMZPOUPUIFNPUPSTIBGU
10 4MJEFUIFTIFBSESJWFUISPVHIUIFDFOUFSIPMFPOUIFGFFEXPSNCVSSBTTFNCMZ5IFFOEXJUIUIFMBSHFTMPUHPFT
JOmSTU"MJHOUIJTTMPUXJUIUIFUPOHVFPOUIFNPUPSTIBGUBTZPVQVTIJOUIFTIFBSESJWF
11 3PUBUFGFFEXPSNCVSSBTTFNCMZUPBMJHOUIFOBSSPXTMPUXJUIUIFOBSSPXTMPUPOUIFTIFBSESJWF
12 *OTFSUBOFXTIFBSEJTLJOUPUIJTTMPUBOEDPWFSXJUIUIFTIFBSDBQ
13 $MFBOPGGUIFJOTJEFTVSGBDFTPGUIFIPVTJOHDPWFSBOESFJOTUBMMJU*GUIFIPVTJOHDPWFSEPFTOUTFBUQSPQFSMZ
UIFTIFBSESJWFJTQSPCBCMZOPUBMJHOJOHXJUIUIFNPUPSTIBGUSFQFBUTUFQ
14 1MVHJOUIFQPXFSDPSE
(4(5306#-&4)005*/((6*%&       ø "
Set
screws
Slotted
screw
Housing
cover
Selector
knob
Broken shear
disk
Feed worm/
burr assembly
Shear
cap
Shear
drive
Spring
Motor shaft
Slot

PRODUCT WARRANTY PW1
:LOEXU&XUWLV&R,QFFHUWL¿HVWKDWLWVSURGXFWVDUHIUHHIURPGHIHFWVLQPDWHULDODQGZRUNPDQVKLSXQGHUQRUPDOXVH7KHIROORZLQJOLPLWHG
ZDUUDQWLHVDQGFRQGLWLRQVDSSO\
3 years, parts and labor, from original date of purchase on digital control boards
2\HDUVSDUWVIURPRULJLQDOGDWHRISXUFKDVHRQDOORWKHUHOHFWULFDOFRPSRQHQWV¿WWLQJVDQGWXELQJ
1\HDUODERUIURPRULJLQDOGDWHRISXUFKDVHRQDOORWKHUHOHFWULFDOFRPSRQHQWV¿WWLQJVDQGWXELQJ
$GGLWLRQDOO\:LOEXU&XUWLV&R,QFZDUUDQWVLWVJULQGLQJEXUUVIRUIRXU\HDUVIURPWKHGDWHRISXUFKDVH6WDLQOHVVVWHHOFRPSRQHQWVDUH
ZDUUDQWHGIRUWZR\HDUVIURPWKHGDWHRISXUFKDVHDJDLQVWOHDNLQJRUSLWWLQJ5HSODFHPHQWSDUWVDUHZDUUDQWHGIRUQLQHW\GD\VIURPWKH
GDWHRISXUFKDVHRUIRUWKHUHPDLQGHURIWKHOLPLWHGZDUUDQW\SHULRGRIWKHHTXLSPHQWLQZKLFKWKHFRPSRQHQWLVLQVWDOOHG
$OOLQZDUUDQW\VHUYLFHFDOOVPXVWKDYHSULRUDXWKRUL]DWLRQ)RUDXWKRUL]DWLRQFDOOWKH7HFKQLFDO6XSSRUW'HSDUWPHQWDW
$GGLWLRQDOFRQGLWLRQVPD\DSSO\*RWRZZZZLOEXUFXUWLVFRPWRYLHZWKHIXOOSURGXFWZDUUDQW\LQIRUPDWLRQ
CONDITIONS & EXCEPTIONS
7KHZDUUDQW\FRYHUVRULJLQDOHTXLSPHQWDWWLPHRISXUFKDVHRQO\:LOEXU&XUWLV&R,QFDVVXPHVQRUHVSRQVLELOLW\IRUVXEVWLWXWHUHSODFHPHQW
SDUWVLQVWDOOHGRQ &XUWLVHTXLSPHQWWKDW KDYHQRWEHHQSXUFKDVHGIURP :LOEXU&XUWLV&R ,QF:LOEXU&XUWLV&R,QF ZLOOQRWDFFHSW DQ\
UHVSRQVLELOLW\LIWKHIROORZLQJFRQGLWLRQVDUHQRWPHW7KHZDUUDQW\GRHVQRWFRYHU
• Adjustments and cleaning: The resetting of safety thermostats and circuit breakers, programming and temperature adjustments are the
responsibility of the equipment owner. The owner is responsible for proper cleaning and regular maintenance of this equipment.
• Replacement of items subject to normal use and wear: This shall include, but is not limited to, spray heads, faucets, light bulbs, shear
disks, “O” rings, gaskets, silicone tubing, silicone elbows, canister assemblies, whipper chambers and plates, mixing bowls, agitation
assemblies and whipper propellers.
7KHZDUUDQW\LVYRLGXQGHUWKHIROORZLQJFLUFXPVWDQFHV
• Improper operation of equipment: The equipment must be used for its designed and intended purpose and function.
• Improper installation of equipment: This equipment must be installed by a professional technician and must comply with all local elec-
trical, mechanical and plumbing codes.
• Improper voltage: Equipment must be installed at the voltage stated on the serial plate supplied with this equipment.
• Improper water supply: 7KLVLQFOXGHVEXWLVQRWOLPLWHGWRH[FHVVLYHRUORZZDWHUSUHVVXUHDQGLQDGHTXDWHRUÀXFWXDWLQJZDWHUÀRZUDWH
• Damaged in transit: Equipment damaged in transit is the responsibility of the freight company and a claim should be made with the carrier.
• Abuse or neglect (including failure to periodically clean or remove lime accumulations): The manufacturer is not responsible for
variation in equipment operation due to excessive lime or local water conditions. The equipment must be maintained according to the
manufacturer’s recommendations.
• 8QDXWKRUL]HGUHSDLURUPRGLÀFDWLRQ7KLVHTXLSPHQWPXVWEHVHUYLFHGRQO\E\TXDOL¿HGVHUYLFHWHFKQLFLDQVXVLQJIDFWRU\VSHFL¿HG
SDUWVWRIDFWRU\VSHFL¿FDWLRQV
• 0RGLÀHG0LVVLQJ6HULDO7DJThe serial number label (tag) must not be defaced or removed.
5HSDLUVDQGRU5HSODFHPHQWVDUHVXEMHFWWR&XUWLV¶GHFLVLRQWKDWWKHZRUNPDQVKLSRUSDUWVZHUHIDXOW\DQGWKHGHIHFWVVKRZHGXSXQGHU
QRUPDOXVH$OOODERUVKDOOEHSHUIRUPHGGXULQJUHJXODUZRUNLQJKRXUV2YHUWLPHFKDUJHVDUHWKHUHVSRQVLELOLW\RIWKHRZQHU&KDUJHVLQFXUUHG
E\GHOD\VZDLWLQJWLPHRURSHUDWLQJUHVWULFWLRQVWKDWKLQGHUWKHVHUYLFHWHFKQLFLDQ¶VDELOLW\WRSHUIRUPVHUYLFHLVWKHUHVSRQVLELOLW\RIWKHRZQHURI
WKHHTXLSPHQW7KLVLQFOXGHVLQVWLWXWLRQDODQGFRUUHFWLRQDOIDFLOLWLHV:LOEXU&XUWLV&R,QFZLOODOORZXSWRPLOHVURXQGWULSSHULQZDUUDQW\
VHUYLFHFDOO
Return Merchandise Authorization (RMA):$OOFODLPVXQGHUWKLVZDUUDQW\PXVWEHVXEPLWWHGWRWKH:LOEXU&XUWLV7HFKQLFDO6XSSRUW'HSDUWPHQW
SULRUWRSHUIRUPLQJDQ\UHSDLUZRUNRUUHWXUQRIWKLVHTXLSPHQWWRWKHIDFWRU\All returned equipment must be properly re-packaged in the
original carton and received by Curtis within 45 days following the issuance of a RMA.1RXQLWVZLOOEHDFFHSWHGLIWKH\DUHGDPDJHGLQ
WUDQVLWGXHWRLPSURSHUSDFNDJLQJNO UNITS OR PARTS WILL BE ACCEPTED WITHOUT A RETURN MERCHANDISE AUTHORIZATION
(RMA). THE RMA NUMBER MUST BE MARKED ON THE CARTON OR SHIPPING LABEL. All warranty claims must be submitted within
60 days of service. Invoices will not be processed or accepted without a RMA number. Any defective parts must be returned in order
for warranty invoices to be processed and approved. $OOLQZDUUDQW\VHUYLFHFDOOVPXVWEHSHUIRUPHGE\DQDXWKRUL]HGVHUYLFHDJHQW&DOO
WKH:LOEXU&XUWLV7HFKQLFDO6XSSRUW'HSDUWPHQWWR¿QGDQDJHQWQHDU\RX
130%6$58"33"/5:ø %