Curtis iMode IP1002MUK User manual

PLEASE READ BEFORE OPERATING THIS EQUIPMENT
MODEL NO. iP1002MUK
PORTABLE DOCKING STATION FOR iPOD
OWNER'S MANUAL

TO PREVENTFIRE OR SHOCK HAZARDS, DO NOTEXPOSE
THIS UNITTO RAIN OR MOISTURE.
This symbol, located on back or bottom of the unit, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
This symbol, located on back or bottom of the unit, is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Any use of the controls or an adjustment to the procedures other than those
specified herein may result in hazardous radiation.
CAUTION:TO PREVENTELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TOWIDE SLOT, FULLYINSERT.
To reduce the risk of electric shock, do not remove cover (or back). There are
no user-serviceable parts inside. Please refer any servicing to qualified service
personnel.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment.
Warnings and Precautions
2

3
Features
2
12
15
13
14
1
4
3
11
6
8
9
5
16
18
17
19
10
7

4
Features Defined
4 POWER Press the POWER button to turn the radio off or on.
6 MEM/CLK SET Press the MEM/CLK SETbutton to program a radio station into the presets, or to
adjust the clock.
AM Antenna is built into the player.
2VOLUME Press the up arrow to increase the volume, and the down arrow to decrease volume.
10 Tuning/NEXT/PREV. Press the Tuning/NEXT/PREV. button to increase/decrease the radio frequency, or
to increase/decrease the clock time when adjusting the clock. When iPod playing, press this button to skip to
previous/next track or press & hold the button to backwards/forwards through a song.
12 Line-Out Use the Line-Out jack to connect the player to external speakers.
11 PLAY/PAUSE/M-UP Press the PLAY/PAUSE/M-UPbutton to play or pause an iPod, or to cycle up
through the preset radio stations.
3 LCD Display View the Time, AM Indicator, iPod Indicator, and Radio Frequency through this Liquid
Crystal Display.
17 AC Connector Plug in the detechable AC cord here.
13 Aux-In Use the Aux-in jack to connect an iPod shuffle or other audio device to the player.
15 FM ST Toggle the FM ST switch between FM ST & FM MONO.
14 Video Out Plug the yellow connector of an AVCord in the Video Output to send a video signal from a
Video iPod to a source (TV) with a Video Input.
9 BAND/STOP Press the BAND button to switch between AM or FM radio stations, or stop iPod playing.
1 iPod Docking Station Connect your iPod, iPod mini, or iPod nano.
5 RADIO/AUX Press the FUNCTION button to switch between radio and Aux-in control.
8IPOD Press the IPOD button to power on an iPod and enable control through the player.
7FM Antenna The FM Rod Antenna provides flexibility and range when adjusting the FM reception. An
16 DBBS Press the DBBS button to switch BBS modes between On/Off.
18 Battery Compartment (8-C Batteries) The Battery Compartment allows the unit to run DC power.
19 AC Cord (230V/ 50 Hz) The attached AC (Alternating Current) Cord provides power to the player.

5
Peripherals
Peripheral Defined
21 ALBUM Press up on the ALBUM button up or down to cycle through the different albums.
20 Navigation Controls/SELECT Use the Navigation Controls to move through an iPod menu system, or
change the radio station. Press the SELECT button to select a song, photo, or video on your iPod.
22 SHUFFLE Press the SHUFFLE button to randomly play songs on an iPod.
23 PLAYLIST Press up on the PLAYLIST button up or down to cycle through the different playlists.
24 MUTE Press the MUTE button to cancel the volume entirely.
25 SLEEP Press the SLEEP button to set the player to turn off after 0-90 minutes.
26 REPEAT / M- Press the REPEAT button to switch between REPEAT 1,REPEATALL or off. Press the
M- button to cycle down through preset radio stations.
iPOD
MENU
VOL

6
Setting the Clock
a. Press and hold the CLK SETbutton.
b. Press the Next/Prev button to toggle between 12HR and 24HR time, and press
the CLK SETbutton to select either option.
c. Press the Next/Prev button to cycle up/down through the hours. Press the CLK
CLK SETbutton to select the hour.
d. Press the Next/Prev button to cycle up/down through the minutes. Press the
CLK SET button to select the minute, and finish setting the time.
Operations
continued
iPod Inserts
1. iPod nano 2GB/4GB
4. iPod w/video 30GB 5. iPod w/video 60GB/80GB 6. iPod photo & color U2 iPod 20GB/30GB
4G iPod & U2 iPod 20GB
3G iPod 10GB
Notes: Connect your iPod w/o inserts for below version
iPod photo 40GB/60GB
4G iPod 40GB
3G iPod 30GB/40GB
2. iPod nano 2GB/4GB/8GB 3. iPod mini 4GB/6GB

7
Operations
Connecting Other Digital Audio Devices
a. Use a line-in cord to connect an iPod shuffle or other audio device to the
line-in port.
b. Press the RADIO/AUX button to activate the Aux-in.
c. The iPod shuffle or other audio device will now play through the speakers of
the player.
Viewing Video or Photos from your iPod on an External Device
a. Using a video cable, connect an external device such as a TVto the Video
Out port on the player.
b. Insert your iPod with video or photo capabilities into the iPod Docking
Station with the appropriate insert.
c. You will now be able to control your iPod from the player’s control panel.
Using the PLAY/PAUSE, NEXT/SEARCH, and PREV/SEARCH buttons you
can move from one video or photograph to the next, play, and pause.

8
Operations
How to using radio
1. Plug the AC Power cord into a power outlet and press the POWER button.
2. If necessary, press the RADIO/AUX button to radio mode.
3. Press the BAND button to switch between AM / FM radio station.
4. Automatic Tuning - Press and hold the TUNING UP or DN buttons until the
display begins to move, then release the buttons. The tuner will scan up or down
the band until it finds the first strong station, and then stop on that station. Repeat
this process until the tuner stops on your desired station.
5. Manual Tuning - Press and release the TUNING UP or DN buttons repeatedly
until the display is showing the frequency of your desired station. Use the manual
tuning method to tune to weaker stations that are bypassed during Automatic
Tuning.
Antennas AM - If reception is weak, turn the unit to improve reception. FM - If
reception is weak, adjust FM Rod Antenna length and the angle to improve
reception.
Programming radio station presets
You can program as many as 10 FM and 10 AM radio station presets.
1. During power on mode, press RADIO/AUX button to select AM/FM band.
2. Press the TUNING UP/DN buttons to desire station you want store.
3. Press and hold the MEM/CLK SET button to activate the programming mode.
4. Press the TUNING UP/DN buttons to select the preset number you want to
store.
5. Press and hold the MEM/CLK SET button to store the station.
6. Repeat Steps 2 through 5 to program additional presets.

9
Operations
To recall the radio station preset
1. Plug the AC Power cord into a power outlet and press the POWER button.
2. Press the RADIO/AUX Button on the front panel to radio mode.
3. Press the BAND button on the front panel to select AM/FM band.
4. Press the MEM-DN (button on the remote "M-") or PLAY/PAUSE/M-UP
Button repeatedly until the preset number you want appears on the display.

LIMITED PRODUCT WARRANTY
Audio Product /Telecom Product /TV/DVD Product
This qualityproduct is warrantedto befreefrommanufacturer’s defects inmaterial and workman-ship,
provided thattheunitis usedunder thenormaloperating conditionsintended bythemanufacturer.
Should anyproblems arise with this product, it is highlyrecommended tovisit our website at
www.curtisint.com.To better serve ourvalued customers, additional copies of operating manuals and trouble shooting
tipshave beenposted on ourwebsite.
If yourqueryremains unresolved, please feel free toemail oursupportteam at: [e-mail] call our UK
Customer helpline at: 0 800 032 5264
TERMS OF WARRANTY
CurtisInternational LTDwarrantsthisproducttobefreefrom defectsinmaterialsand workmanship for1yearonparts
and 90 daysonlabor.
Nothing withinthis warrantyshall implythat Curtis International LTD will be responsible orliable for anydamageto
anyitems placedin this product, whether dueto anydefect of the product, or its use, proper orimproper.
This warrantyis in additionto,andin nowayimpacts upon,yourstatutoryrights.
TOOBTAIN REPLACEMENT / CREDIT/or REPAIRSUNDERTHIS WARRANTY
1. Theoriginalpurchasermustpresent acopyoftheoriginalbill ofsaleandthisservicewarrantycard.
2. Anyalterations, abuse, misuse,batterycorrosion or accidental damage voidsthe warranty.
3. Thewarrantydoes not covercabinets andnon essential accessories.
4. No warrantyorinsurance containedor set out shall applywhen damage orrepairis caused bypower
failure;damage in transit bythe consumer ,orwhen moving theunit; improperpower supply;use for commercial
or industrial purposes; service calls resulting in customer education, etc.
5.Thedefectiveproduct shouldbe takento youroriginal supplier
6. Curtis International LTDreserves the righttorepairor replacethepartswhichhavebecome defective.
Please record theappropriate information indicatedbelow onthis Warranty Card andretainwithyourproof
ofpurchase.
Model No………………Serial No……………………..
Date Purchased………………………………Supplier /Retailer ………………………..