CWS PoolStart 9037400192-CMP User manual

Providing
naturally pure,
healthier water.
Contact Chamber and
PoolMoss®Packs
Installation and Product Use Instructions

V3.0
Providing
naturally pure,
healthier water.
Installation Diagrams with Contact Chamber Before the Pump:
(Installation can be done either before or after the pump. Shown below)
Before the pump is the preferral method. Plumbing in the contact chamber in this way will prevent
the moss from entering the pool in the rare circumstances that the mesh loses integrity.
Installation Diagrams with Contact Chamber After the Pump:
Recommended Flow Rate
Minimum: 1 gpm
Maximum: 10 gpm
Recommended Flow Rate
Minimum: 1 gpm
Maximum: 10 gpm

Providing
naturally pure,
healthier water.
PoolStart™ contact chamber:
9037400192-CMP
25830-350-000
25830-400-000
25280-615-600

V3.0
Providing
naturally pure,
healthier water.
Maintenance Instructions
Spring Start Up/Opening
•Install the PoolNaturally® system at the beginning of the pool season for best results.
•Start with a fresh filter.
oRemove filter media (sand, DE) and replace with fresh media.
oFor best results replace cartridge filter or please ensure the cartridge is well
cleaned.
•When starting/opening pool, do not add stabilizer (cyanuric acid. *If using stabilized chlorine, maintain
cyanuric acid below 20 ppm) or algaecide.
•Add EPA registered pool chlorine to get recommended free chlorine level
•Adjust pH, alkalinity, and hardness to recommended levels.
Free chlorine 1-3ppm
pH 7.2-7.4
alkalinity 40-120
Cyanuric Acid (CYA) *less than 20ppm
•Once water has been balanced, add PoolMoss® to PoolStart™ contact chamber according to the
dosage chart (see detailed instructions below – Changing PoolMoss®).
•The first season you use the PoolNaturally® system, check and clean filter or backwash filter
weekly for the first month. As material is shed from the pipes and pool surfaces, it will collect on/in
filters and needs to be removed by rinsing or backwashing.
Routine Maintenance
•PoolMoss® dosing has been designed for best results when PoolMoss® is changed once a month
(see below for details about how to change PoolMoss®).
•Maintain 1-3 ppm of free chlorine.
•Monitor pH, alkalinity, hardness, free chlorine and cyanuric acid (if using CYA or stabilized
chlorine) weekly with test strips or other approved testing equipment or take water samples to your
local pool retailer.
Important Pool Maintenance Note
When backwashing, hyper-chlorinating, shocking, or using algaecide, close the inflow and outflow valves to
the PoolStart™. Re-open valves when chlorine levels return to 1-3 ppm free chlorine and, if using an
algaecide, when it is once again safe to use your pool per algaecide instructions.
At the End of the Season (for cooler climates)
Take appropriate winterizing steps for the whole pool system. Completely empty water from the PoolStart™
contact chamber and remove PoolMoss®. Add WinterMoss™for best results!

Providing
naturally pure,
healthier water.
Changing PoolMoss®
•To change PoolMoss®, close the inflow and outflow valves at the contact chamber.
•Open the air reliefsvalve to relieve pressure
•Remove lid from the contact chamber.
•Remove old PoolMoss®and dispose.
•Add new PoolMoss®according to dosage chart below.
•Lubricate o-ring as needed.
•Install the contact chamber lid and lock ring, do not over tighten the lock ring and verify that the air
relief vent is closed.
•Open the previously closed inflow and outflow valves on the PoolStart™ contact chamber.
•Slightly open the air relief valve on the cover and leave open until water flows out, the contact
chamber is now full. Tighten / close the air relief valve.
!
PoolRefill 5 10 10
15
quantity
PoolRefill 5 10 10
15
quantity
PoolRefill 5 10 10
15
quantity

V3.0
Providing
naturally pure,
healthier water.

Providing
naturally pure,
healthier water.
GENERAL DISCLAIMERS
PoolNaturally®, PoolStart™ and PoolMoss®are intended for residential home use only. Neither
PoolNaturally® , PoolStart™ nor PoolMoss®are intended to be a sanitizer or disinfectant for killing bacteria.
Terms and conditions
Satisfaction Guaranteed – 90 Day Limited Warranty.
Creative Water Solutions, LLC warrants and guarantees for ninety (90) days from the date of retail purchase
or internet shipment that you will be completely satisfied with PoolNaturally®and the PoolNaturally®line of
products, including without limitation to PoolNaturally®, PoolStart™ and PoolMoss®.
Refund/Replacement Product Policy
In the event you find PoolNaturally®to be unsatisfactory for any reason within ninety (90) days after retail
purchase or shipment to you, Creative Water Solutions, LLC will, at your option, provide as your one-time,
exclusive remedy either (i) a 100% refund of your purchase price paid for the product said to be
unsatisfactory, or (ii) replacement product delivered to you free of charge.
The amount of any refund, or the quantity of replacement product, whichever remedy is elected, shall be
limited to the value of your purchase price actually paid for the unsatisfactory product purchased within the
90-day period.
Each customer is entitled to a one-time option to receive either a refund or replacement product, and any
customer exercising either option shall no longer qualify for either a refund or replacement product on future
purchases or use of PoolNaturally®products.
Limitation of Remedies, Waiver and Release of Claims
The PoolNaturally®Refund/Replacement Product Policy set forth above is the exclusive warranty and
remedy for your use of any PoolNaturally®product, including without limitation to PoolNaturally®,
PoolStart™, PoolMoss®. All claims for refunds are deemed waived or released unless made in accordance
with the PoolNaturally®refund/replacement product policy.
Except as provided under the PoolNaturally®refund/product replacement policy, PoolNaturally®and all
products within the PoolNaturally® product line are being sold on an “as is” or “with all faults” basis, and the
entire risk as to the quality and performance of the goods is with the buyer. No other guarantees or
warranties are made, express or implied, including, but not limited to, any implied warranty of
merchantability or fitness for a particular purpose or any implied warranty arising out of a course of dealing,
custom, or usage of trade.

V3.0
Providing
naturally pure,
healthier water.
All other claims of negligent or unintended loss, harm, injury or wrongdoing, whether in contract, negligence,
strict liability or any other unintentional tort, are deemed waived or released by you, regardless whether or
not submitted under or within the PoolNaturally®refund/replacement product policy. In no event will
Creative Water Solutions, LLC be liable for incidental, consequential, special or punitive damages resulting
from any breach of contract, negligence or other unintentional cause.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
For warranty claims or technical support, please contact your authorized PoolNaturally®dealer or contact us
directly toll free at 877-212-6493.
Many of our products are assembled by persons with disabilities supported by Lifeworks Services.
Learn more at www.lifeworks.org
Creative Water Solutions
Contact Information
13809 Industrial Park Blvd.
Plymouth, MN 55441
Phone (763) 398-0141
Fax (763) 551-2572
info@cwsnaturally.com
www.cwsnaturally.com
Table of contents
Popular Lighting Equipment manuals by other brands

olympia electronics
olympia electronics GR-579/L/90/WP quick start guide

TOBIAS GRAU
TOBIAS GRAU MY TABLE LT00-0 Assembly instructions

LOTRONIC
LOTRONIC AFX-Light 8ROLL-FX user manual

Somogyi
Somogyi Home 200 instructions

Pool Controls
Pool Controls Chemigem D10 user manual

Efka
Efka Outdoor Lightbox 80 installation manual

Coopers of Stortford
Coopers of Stortford K915 Instructions for use

Arcadia
Arcadia ThermalZooPro Safety installation and maintenance instructions

ARRI
ARRI Studio Cool 4 quick guide

Mirabella International
Mirabella International Mirabella Genio quick start guide

JUST NORMLICHT
JUST NORMLICHT DLS COLOR VIEWING LIGHT V7 S Assembly and instruction manual

Generay
Generay SpectroLED Studio 800 user manual