CYBELEC CybTouch Series User manual

CybTouch
Series
User Manual
JANUARY
2020
V4.0
for Shears

User Manual –CybTouch series
CybTouch Series –User Manual
JAN.
2020
V5.0
1/39
© 2020 Cybelec S .A. All
Rights R eserved
Copying, reproduction, modification, distribution, display or transmission of anyof the contents of this
manual for any purpose without the prior consent of Cybelec S.A. is strictly prohibited.

User Manual –CybTouch series
CybTouch series –User Manual
JAN.
2020
V5.0
2/39
Table of Contents
Safety....................................................................................................................................................................5
General Safety ..................................................................................................................................................5
Signs and Icons appearing in this Manual ........................................................................................................6
General warning ...........................................................................................................................................6
Information...................................................................................................................................................6
Settings.........................................................................................................................................................6
Navigation.....................................................................................................................................................6
Getting started with CybTouch.............................................................................................................................7
General navigation ...........................................................................................................................................8
Menu Button ................................................................................................................................................8
Status Page Zone ..........................................................................................................................................8
Screen Cleaning ............................................................................................................................................8
Status page .......................................................................................................................................................9
User Preferences ..............................................................................................................................................9
Language.................................................................................................................................................... 10
Length Units............................................................................................................................................... 10
Show axes position values......................................................................................................................... 10
AutoCut TDC Time ..................................................................................................................................... 10
Sheet support ............................................................................................................................................ 10
Materials.................................................................................................................................................... 11
RFLink......................................................................................................................................................... 12
Clear indexation......................................................................................................................................... 12
Set Clock .................................................................................................................................................... 12
Touchscreen Calibration............................................................................................................................ 13
Brightness xx% Eco xx%............................................................................................................................. 13
Program counter mode ............................................................................................................................. 13
Manual Axes Movement ............................................................................................................................... 14
Service Page................................................................................................................................................... 15
Set Axis ...................................................................................................................................................... 15
Maintenance.............................................................................................................................................. 15
Information................................................................................................................................................ 16
Configuration options................................................................................................................................ 17
Basic Page Description....................................................................................................................................... 18
Program Page ................................................................................................................................................ 18

User Manual –CybTouch series
CybTouch Series –User Manual
JAN.
2020
V5.0
3/39
Available functions on the Program page ................................................................................................. 18
Extra Cutting Features............................................................................................................................... 19
Optional features....................................................................................................................................... 21
Basic Parameters Page .................................................................................................................................. 23
Available parameters on the Basic page ................................................................................................... 23
Creating a Part Program .................................................................................................................................... 25
Basic Parameters ........................................................................................................................................... 25
Next-Part Function ........................................................................................................................................ 26
Cycles and quantities................................................................................................................................. 27
Managing Programs........................................................................................................................................... 28
Saving a Program........................................................................................................................................... 28
Loading a Program......................................................................................................................................... 28
Deleting a Program........................................................................................................................................ 28
EasyCut Page ..................................................................................................................................................... 29
Making a cut on the EasyCut Page ................................................................................................................ 29
Error and Warning Messages ............................................................................................................................ 30
Warning Messages ........................................................................................................................................ 30
Error Messages.............................................................................................................................................. 33
Resources .......................................................................................................................................................... 38
Tutorials - Videos........................................................................................................................................... 38

User Manual –CybTouch series
CybTouch series –User Manual
JAN.
2020
V5.0
4/39

User Manual –CybTouch series
CybTouch Series –User Manual
JAN.
2020
V5.0
5/39
The users must have Read and Understood, but most of all must Respect the directives
described in this manual.
All people coming into contact with the machine on which the numerical control is installed,
whatever their function or whatever state the machine is in (assembly, disassembly, start-up,
production, maintenance, repairs) must have read and understood the requirements
concerning the security and the entirety of the directives of operation described in the
manuals delivered with the machine.
The operator must be properly trained to work with the machine on which the numerical
control is installed. Improper use of the numerical control can cause heavy damage on
equipment and/or injuries to people.
Modification of machine parameters can cause important material damage or lead to
irregular product quality.
Do not expose the numerical control to excessive humidity to avoid any risk of electrocution
and any deterioration of the equipment.
Make sure the numerical control is disconnected from the mains power before carrying out
any cleaning. Do not use liquids based on alcohol or ammoniac.
In case of malfunction of the numerical control, call a technician.
Do not expose the numerical control to direct sun rays or any other heat source.
Do not place the numerical control in the neighbourhood of magnetic equipment such as
transformers, motors or devices which generate interference (welding machines, etc.)
SAFETY
GENERAL SAFETY

User Manual –CybTouch series
CybTouch series –User Manual
JAN.
2020
V5.0
6/39
While using this manual, you will come across the signs and icons represented here below:
they are directly related to the safety and security of persons. Carefully follow this advice and
inform others about it.
This warning sign appears in the manual whenever it is necessary to pay attention to rules,
instructions or advice. The correct sequence of operations is to be followed in order to avoid
damage to the machine.
Symbolizes a serious personnel danger.
This warning sign appears in this manual whenever an important information needs to be
taken into consideration. Pay attention to this sign and follow the instructions given.
This sign appears in this manual whenever SETTING INSTRUCTIONS are given. Pay attention to
this sign and follow the sequence of instructions given.
This icon appears in this manual to give navigation information, to give the path to the subject
treated in the chapter.
General warning
Information
Settings
SIGNS AND ICONS APPEARING IN THIS MANUAL
Navigation

User Manual –CybTouch series
CybTouch Series –User Manual
JAN.
2020
V5.0
7/39
Depending on software evolutions and the press brake controlled by the CybTouch
(configuration/capabilities), the present manual may not fully correspond to the CybTouch
that you currently have. However, differences are only minor.
This manual describes all features of
▪CybTouch 8G, 12G
Touchscreens are pressure sensitive.
Do not press down hard on the screen.
Pressing hard on the screen will damage
the display. Such damage is not covered
by manufacturer warranty!
Do not use sharp and/or pointed objects (sheet metal, screwdriver, metal pen ball, etc.) to
touch the screen; only use your fingers (with or without gloves on) or a plastic pen. Make sure
that your gloves do not have metal particles encrusted in the fingertips as they may also
damage the screen.
Take a few minutes to practice pressing gently on the screen, you will find that the screen is
very reactive, and it is pleasant to use.
GETTING STARTED WITH CYBTOUCH

User Manual –CybTouch series
CybTouch series –User Manual
JAN.
2020
V5.0
8/39
The Menu button allows you to directly select (jump to) the desired screen. The content
of the menu changes contextually.
The Status pages zone gives access to the Status page. This is really a zone that is active at
any moment from any page.
To clean the screen while the CybTouch is on, touch the button.
Use only a damp and smooth cloth with soap or a neutral detergent.
NEVER use solvent, petrol, benzene, alcohols, etc.
GENERAL NAVIGATION
Screen Cleaning button
Add step or
next step
Status
Pages Zone
Menu button
Status Page Zone
Screen Cleaning
Menu Button

User Manual –CybTouch series
CybTouch Series –User Manual
JAN.
2020
V5.0
9/39
The Status page shows the status of all inputs and outputs and axes positions of the NC.
This feature is very useful during setup or during phone service with a machine installed in
the field.
This page is accessed from anywhere by pressing the Status Pages Zone.
To exit the Status page, press on the arrow on the left.
Axes have specific indicators. Their colour indicates the position of the axis relative to the
tolerance.
Possible states are:
•: Device not active and in the tolerance.
•: Device moving.
•: Device not active and outside of the tolerance.
(Menu Button) → Other menus → User preference
To exit the User Preference page, touch the button.
STATUS PAGE
On the upper line, a
cycle message may
appear indicating the
cycle phase the
machine is executing
Press arrow to
exit Status Page
USER PREFERENCES