Cyber Acoustics AC-5008 User manual

Quick Start Guide
www.CyberAcoustics.comCA P/N: AC-5008 Rev. A00
2022-03
AC-5008
USB Headset
In-line volume & mute control
Refer to the Frequently Asked
Questions on pages 5 & 6 if there
are problems with the headset
functioning properly
Do Not Throw Away

Headset with USB Type A plug
In the Package
Quick-Start Guide
AC-5008 USB Headset
In-line volume & mute control
In-line volume & mute control
Quick Start Guide
www.CyberAcoustics.comCAP/N: AC-5008 Rev. A00
2022-03
AC-5008
USB Headset
In-line volume & mute control

Table of Contents
Using the AC-5008 USB Headset
Getting Started
Controls
Technical Specifications
Frequently Asked Questions
Customer Support
Safety and Precautions
Pages
1
2
3
4
5, 6
7
8
9
Compliance Information

Page 1
Using the AC-5008 USB Headset
Best for Use In
Skype, Zoom &
Other Internet Calls
Plug and Play
Music

Getting Started
Insert the end of the USB Headset Cable into
the USB Type A port on your computer as shown.
The Headset features full plug and play support for Windows, MacOS &
Chromebooks. After plugging the headset into the computer’s USB Type A
port, you may start any application that accepts a headset, such as Skype
and begin using your headset.
If the computer does not automatically recognize the headset when it is
plugged into the USB Type A port, try plugging the USB Headset Cable into
a different USB Type A port. If this does not work, then restart the computer.
This will cause the headset to be recognized in most instances.
The Headset has an adjustable headband to fit
different head sizes. To adjust pull the headband
and earcup apart on each side as shown until the
headset is adjusted to the desired fit.
Page 2

Controls
Page 3
Mic On/ OffVolume up / down
- If the microphone is not functioning properly, check to make sure the
Mic Mute shown above is selected to the On position.
- If there is no sound from the headphones, check to make sure the volume
is turned up with the volume adjustment shown above and the volume
setting on your computer is also turned up.

Frequency response
Recommended system requirements
Windows 10, Windows 8, Windows 7, Mac OS X 10.4.11, or higher.
• Headset: 20 - 20,000Hz
• Microphone: 100 - 16,000Hz
• -62dBV / microbar
• -42dBV / Pascal +/- 4dB
Sensitivity:
Impedance • Headset: 32 ohms
• Microphone: 2.2k ohms
Specifications
Technical Specifications
Supported operating systems
Operating temperature Product working at ambient temperature for 0~35°C
Page 4

Mac:



















Windows 7/8:

Frequently Asked Questions
Frequently Asked Ques�ons Possible Solu�ons
Page 5











Windows 10:


Headset does not have sound / Microphone is not working • Check the computer’s and headset’s volume level.
• Make sure the headset USB cable is plugged in all the way to your computer.


• Check that the computer recognizes the Headset - showing it is connected






a computer connect to the Headset.
Frequently Asked Questions
Frequently Asked Ques�ons Possible Solu�ons
Page 6

Customer Support
Contact us at:
www.cyberacoustics.com/support/contact
If you have a question about your Headset, our Customer Support Team
wants to assist you.
Page 7
We are dedicated to your success with our products.

Safety and Precautions
- Read and follow all instructions – All operating and use instructions should befollowed.
- Protect the Headset from being pinched, particularly at the connectors. Unplug during
lightning storms or when unused for long periods of time.
- Donot place near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
- Do not make alterations to the headset.
- Do notplace near naked flame sources, such as lighted candles
- Do not expose to excessiveheat (e.g. from storage in direct sunlight, fire or the like)
2022 Cyber Acoustics or its subsidiaries. All rights reserved. Cyber Acoustics and other
trademarks are trademarks of Cyber Acoustics or its subsidiaries. Other trademarks may be
trademarks of their respectiveowners.
Page 8

Unique Identifier: (AC-5008)
Responsible Party - Cyber Acoustics LLC
3109 NE 109th Ave., Vancouver, WA 98682
cyberacoustics.com
Compliance Information Statement:
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiving device
• Connect the equipment into an outlet on different circuit from the receiving device
• Consult the dealer or an experienced radio/TV technician for help
• Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Page 9