EXPECTED RUNTIME IN MINUTES 
(Due to the differences in computer components, the runtime will vary.) 
 
Model iMac G4 Desktop PC with 
LCD Monitor Desktop PC 
 with 15” Monitor Desktop PC 
 with 17” Monitor Desktop PC 
 with 21” Monitor 
CP685AVR 
BF685 70 minutes 45 minutes 28 minutes 22 minutes 16 minutes 
CP800AVR 
BF800 85 minutes 52 minutes 36 minutes 28 minutes 20 minutes 
 
DEFINITIONS FOR ILLUMINATED LED INDICATORS 
 
 
Power ON 
 
Wiring Fault 
 
Alarm 
CONDITION 
On Off Off Normal 
On On/Off 
Two Beeps Utility Failure- The UPS is providing power to battery power-supplied 
outlets from its battery. 
On On/Off 
Rapid Beeps Utility Failure- The UPS is providing battery power. Rapid beeps 
indicate the unit will run out of power shortly. 
Off Off 
Long Beep 
System Overload- Occurs when connected equipment exceeds the rating 
of unit. Turn the UPS off, unplug at least one piece of equipment, wait 10 
seconds, reset the circuit breaker and turn the unit on. 
Off On/Off 
Long Beep 
Battery Overload- Occurs when connected equipment exceeds the rating 
of battery outlets of the unit. Turn the UPS off, unplug at least one piece 
of equipment from battery outlets, wait 10 seconds, reset the circuit 
breaker and turn the unit on. 
On/Off On None 
Electrical Wiring Fault- This indicates a wiring problem with the AC 
outlet such as bad ground, missing ground, or reversed wiring. User is 
advised to disconnect all electrical equipment from the outlet and have an 
electrician check the outlet to insure proper wiring. 
 
 
Limited Warranty and Connected Equipment Guarantee 
 
In purchasing a CP685AVR / BF685 CP800AVR / BF800 in the United States or Canada, the original end user receives a LimitedWarranty 
and Connected Equipment Guarantee from Cyber Power Systems (USA), Inc. (for ease of reading, referred to as "CyberPower"). The 
Limited Warranty and the Connected Equipment Guarantee are intended to be the original end-user's exclusive rights and remedies. The 
Limited Warranty and the Connected Equipment are separate, all though they are related. 
 
Limited Warranty.The original end user (referred to as the "InitialCustomer") receives an express limited warranty (referred to as the 
"Limited Warranty") for the CP685AVR / BF685 CP800AVR / BF800 purchased from CyberPower (referred to as the "Product"). The Limited 
Warranty is for the Product itself.The terms of the Limited Warranty are explained below. 
 
Connected Equipment Guarantee. CyberPower also provides the Initial Customer with protection in the event that the Product is not free 
from defects in materials and workmanship, and certain equipment connected to the Product is damaged (the "Connected Equipment 
Guarantee"). The Connected Equipment Guarantee protects the Initial Customerfor damage to equipmentplugged into the Product.The 
terms of the Connected Equipment Guarantee are explained below. 
 
The Limited Warranty and the Connected Equipment Guarantee are subject to the terms set forth below. Additionally, State or Provincial law 
may adjust the terms of the Limited Warranty or the Connected Equipment Guarantee or the State or Province may impose additional 
obligations, or additional "implied warranties."To the extent necessary to comply with those laws, the terms of the LimitedWarranty and the 
Connected Equipment Guarantee should be read to adjust to those requirements only to the extent necessary to comply with such local law. 
 
If you are an Initial Customer, you are asked to read the following terms and conditions carefully before using the Product. By using the 
Product you consent to be bound by and become a party to the Limited Warrantyand Connected Equipment Guarantee. If you do not agree 
to the terms and conditions of the Limited Warranty and Connected Equipment Guarantee, you should return the Product for a full refund 
prior to using it. REGISTRATION 
CyberPower requests that you complete and return the WarrantyRegistration Card enclosed with the Product or register the Product at its 
website (www.cyberpowersystems.com)to establish that you are the Initial Customer of the Product, and therefore entitled coverage under 
the Limited Warranty and the Connected Equipment Guarantee. (Registration is not requiredfor Limited Warranty coverage, but note if you 
do not complete a registration card you will be required to provide proof of purchase, as described below, to have the benefits of this Limited 
Warranty.) LIMITED WARRANTY 
CyberPower warrants to you, the Initial Purchaser, that the Product will be free from defects in material and workmanship for three years 
from the date of original purchase, subject to the terms of this Limited Warranty. 
 
Any Implied Warranty of Merchantability or for Fitness for a Particular Purpose, if applicable to the Product, is limited in duration to the period 
of ownership by the Initial Customer. This provision shall NOT create any Implied Warranty or Merchantability or of Fitness for a Particular 
Purpose that would not otherwise apply to the Product. NOTE: Some States do not allow limitations on how long an implied warranty 
lasts, so the above limitation may not apply to you. 
 
To be covered you must still be the owner of the Product at the time of the failure that results in the claim made under this Limited Warranty. 
 
Exclusive Remedies Under Limited Warranty. 
Your exclusive remedyand CyberPower's' sole obligations are as follows for the Product: 
If (a) the CyberPower Product you purchased and still own is defective in material or workmanship under this Limited Warranty or any 
applicable warranty imposed by law, and 
(b) all Limited Warranty requirementshave been met, CyberPower will repair or replace the 
Product if it proves to be defective in material or workmanship during theWarranty Period. 
 
Making a Limited Warranty Claim. 
To make a Limited Warranty claim on a Product, you must do the following: 
1. Complete and return the CyberPower Warranty Registration Card,or provide reasonable proof of purchase (for example, a sales receipt) 
that establishes you as the Initial Customer (the original end-user consumer purchaser) of the Productand prove that the Product was 
purchased within three(3) years of the eventfor which you want to make a claim for warranty service. 
2. Call CyberPower at (952) 403-9500 or (877) 297-6937 (toll free), write to CyberPower at 5555 12th Ave. East, Suite 110, Shakopee, MN 
55379, or e-mail CyberPower at claims@cyberpowersystems.com, within ten (10) days of the event for which you want to make a claim. 
3. When you contact CyberPower, identify the Product, the Purchase Date, and request Return Materials Authorization (RMA) information 
from CyberPower. 
4. Pack and ship the Product to CyberPower as instructed in your RMA. Show the RMAcode on the shipping label or include it with the 
Product. You MUST prepay all shipping costs and you are responsible for packaging and shipment. 
CyberPower will inspect and examine the Product within ten (10) days of receipt. If the Product is not as warranted, CyberPower will repair 
or replace the Product and return it to you at CyberPower's expense, or, if CyberPower is unable to or decides not to repair or replace the 
Product (if defective) within a reasonable time, CyberPower will refund to you the full purchase price you paid for the Product (purchase 
receipt showing price paid is required). CONNECTED EQUIPMENT GUARANTEE 
If you are the Initial Purchaser and the Product is still covered by the Limited Warranty, the Connected Equipment Guarantee provides 
protection for damage to equipment connected to the Product ("Connected Equipment"), subject to certainterms and limitations. 
 
The Connected Equipment Guarantee is not "first dollar" coverage. It is secondary. If you have any other source of payment for your loss, 
such as insurance, another warranty, or an extended warranty or purchase protection plan (“Primary Coverage”), CyberPower’ will pay only 
to the extent that that the Primary Coverage does not cover the loss. CyberPower's obligation is reduced by any amounts that you are 
entitled to recover from the Primary Coverage, whether or not you make a claim for recovery under any applicable Primary Coverage. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The Limited Warranty does not cover Connected Equipment, but as is explained below, to be covered under the Connected Equipment 
Guarantee, the Connected Equipment must have been damaged due to a failure of the Product. The Connected Equipment must have been 
damaged due to a defect in materials or workmanship of the Product 
In the event of damage to the Connected Equipment, your exclusive remedies, and CyberPower’s sole obligations, are as follows for 
Connected Equipment. If (a) the Product purchased and owned by you is defective in material or workmanship; (b) the Limited Warranty 
requirements have been met (except that the three year limitation of the Limited Warranty does not limit the Connected Equipment 
Guarantee, which is for the lifetime of the Product), and; (c) none of the limitations or exclusions on warranty coverage apply (or than the 
three year limit), CyberPower will (as CyberPower elects, as permitted by law), repair, replace, or pay the Agreed Damage Amount (defined 
below) for, the item(s) of your electronic equipment directly and properly connected to the product (the "Connected Equipment") if that 
Connected Equipment is (x) damaged by AC power line transients, spikes, or surges on properly installed, grounded, and code-compliant 
120 volt power lines in the United States and Canada, or by transients, surges or spikes on standard telephone equipment lines, or Base 
10/100T Ethernet lines that are properly installed and connected (a "Power Disturbance") and (y) is directly plugged into and properly 
connected to a CyberPower Product in its original condition which is properly operated when a Power Disturbance passes through the 
CyberPower Product and (y.1) exhausts the protection capacity of the CyberPower Product or (y.2) damages the CyberPower Product. This 
provision sets out the only liability of any character of CyberPower for direct, indirect, special, consequential, and/or incidental damages 
under our Limited Warranty, applies only to Connected Equipment, and all such Liability is limited to the Agreed DamageAmount. 
 
Making a Connected Equipment Guarantee Claim. 
To make a Warranty claim for damage to Connected Equipment under the Connected Equipment Guarantee, you must do the following: 
1. Complete and return the CyberPower Warranty card or provide reasonable proof of purchase, for example, a sales receipt that 
establishes you as the original end-user consumer purchaser of the Product. 
2. Call CyberPower at (952) 403-9500 or (877) 297-6937 (toll free), write to CyberPower at 5555 12th Ave East, Suite 110, Shakopee, MN 
55379, or e-mail CyberPower at claims@cyberpowersystems.com within ten (10) days of the date of the event for which you wish to make a 
claim for warranty service. 
3. When you contact CyberPower, identify the Product, the Purchase Date, and the item(s) of Connected Equipment. Have information on all 
applicable insurance or other resources of recovery/payment that are available to the Initial Customer and the name of the power utility 
supplier for the location of the Connected Equipment and Request a Claim Number. 
4. Pack and ship the product to CyberPower and, if requested, the item(s) of Connected Equipment, a repair cost estimate for the damage to 
the Connected Equipment, and all claim forms that CyberPower provides to you. Show the Claim Number on the shipping label or include it 
with the product. Initial Customer shall prepay all shipping costs, must pay the cost of the repair estimate, and is responsible for 
packaging and shipment. 
 
CyberPower’s Duties. 
CyberPower will inspect and examine the Product and the item(s) of Connected Equipment (or at CyberPower's election, your written 
statement and repair cost estimate for those item(s)). You must return the product for inspection. 
If the damage to Connected Equipment is covered by the Connected Equipment Guarantee, CyberPower will (in addition to Limited 
Warranty remedies for the CyberPower Product itself) repair (orpay the costs of repair) or replace the Connected Equipment or, at the option 
of CyberPower, as permitted by law, pay to the Initial Customer the "Agreed Damage Amount" (up to the aggregate limits stated below) for 
all item(s) of Initial Customer's Connected Equipment. The "Agreed Damage Amount" for all items of Initial Customer's Connected 
Equipment shall be the lesser of the amount determined under Clause (1) or (2) below, reduced by any amounts described in Clause (3) 
below: 
1. The fair market value of the Connected Equipment as established by the lower of (a) the price list of Orion Blue Book on the date of 
occurrence (or if such price list is no longer published, a published or announced price list reasonably selected by CyberPower), or (b) the 
average price the same or similar items are being sold for on 
E-bay, or (c) the lowest price the same or similar items canbe purchased for in the United States; or 
2. The aggregate ceiling amount for all Connected Equipment: CyberPower CP685AVR / BF685 - $125,000.00. CP800AVR / BF800 - 
$200,000.00. 
3. The amount(s) of all payment you have or are entitled to receive from insurance, other warranties, extended warranties, or from other 
sources or persons for the Connected Equipment or damage to such equipment so that CyberPower’s maximum liability shall be reduced to 
reflect all such other payments or sources of recovery 
If CyberPower replaces the connected equipment or pays to the Initial Customer the Agreed Damage Amount, the Initial Customer shall 
transfer ownership of all item(s) to CyberPower without warranty by the Initial Customer, but free of lien or other interest. 
 
CONDITIONS COMMON TO THE LIMITED WARRANTY AND THE CONNECTED EQUIPMENT GUARANTEE 
The Limited Warranty and the Connected Equipment Guarantee are the only and the exclusive express warranty of CyberPower with 
respect to the Product.This exclusion of other express warranties applies to written and oral express warranties. 
 
LIMITATION: THE LIMITED WARRANTY AND THE CONNECTED EQUIPMENT GUARANTEE DOES NOT COVER 
The Limited Warranty and the Connected Equipment Guarantee are intended to exclusive rights and remedies and replace any other rights, 
to the extent allowed by law. 
1. As to the CyberPower Product, the limited warranty does not cover or apply to: misuse, modification, operation or storage outside 
environmental limits for the Products, in transit, in shipment, or in storage, damage or deterioration, improper operation or maintenance, or 
use with items or equipment not designed or intended for use with the product. 
2. As to Connected Equipment, the Connected Equipment Guarantee covers only damage within the specific terms of the Connected 
Equipment Guarantee to Connected Equipment (and only up to the applicable aggregate ceiling amount). 
3. The Connected Equipment Guarantee does not cover damage to Connected Equipment or apply if the Product has been operated in a 
failure mode or not in compliance with CyberPoweroperating instructions and manuals, or if the ConnectedEquipment has been operated in 
a failure mode or not in compliance with the instructions and manuals of its manufacturer/vendor. 
The Limited Warranty and the Connected Equipment Guarantee Do Not Apply Unless The Initial Customer: 
1. Has properly connected the Product and the Connected Equipment to properly wired and grounded outlets (including compliance with 
electrical and safety codes of the most current electrical code (ANS/NFPA 70), without the use of any adapters, extension cords or other 
connectors. 
2. Has provided a suitable and proper environment for use and installation of the Product and Connected Equipment. 
3. Has properly installed and operated the CyberPower Product and Connected equipment. 
4. Has operated the Productat all times within the limitations on the Product’s VAcapacity as stated in this UserManual. 
 
CyberPower Does Not Cover or Undertake Any Liability in Any Event for Any of the Following: 
1. Loss of or damage to data, records, or software or the restoration of data or records, or the reinstallation of software. 
2. Damage from causes other than AC Power Line Transients, spikes, or surges on properly installed, grounded and code-compliant 120 
volt power lines in the United States and Canada; transients, surges or spikes on standard telephone land lines, PBX telephone equipment 
lines or Base 10T Ethernet lines, when properly installed and connected. (This exclusion applies, for example, to fluctuations in data 
transmission or reception, by CATV or RF transmission or fluctuations, or by transients in such transmission. 
3. Damage from any circumstance described as excludedabove with respect to the product. 
4. Damages from fire, flood, wind, rain, rising water, leakage or breakage of plumbing, abuse, misuse or alteration of either the product or 
the Connected Equipment. 
 
Exclusion of Consequential and Other Damages. 
The sole and exclusive remedies of the Initial Customer are those provided by the Limited Warranty and Connected Equipment Guarantee. 
CyberPower excludes any liability for personal injury under the Limited Warranty and Connected Equipment Guarantee. CyberPower 
excludes any liability for direct, indirect, special, incidental or consequential damages, whether for damage to or loss of property [EXCEPT 
FOR (AND ONLY FOR) the specific limited agreement of CYBERPOWER to provide certain warranty benefits regarding "Connected 
Equipment" under the "CYBERPOWER Connected Equipment Guarantee"], loss of profits, business interruption, or loss of information or 
data. NOTE: Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above 
limitation may not apply to you. 
 
DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES. 
CyberPower does not sell the Products for use in high-risk activities. The Product is not designed or intended for use in hazardous 
environments requiring fail-safe performance, including the operation of nuclear facilities, aircraft navigation or communication systems, air 
traffic control, weapons systems, life support or medical applications or for use in any circumstance in which the failure of the Product could 
lead directly to death, personal injury, or severe physical or property damage, or that would affect operation or safety of any medical or life 
support device (collectively, "High RiskActivities"). CyberPower expressly disclaims any express or implied warranty of fitness for High Risk 
Activities. CyberPower does not authorize use of any of its products use in anyHigh RiskActivities. 
 
ANY SUCH USE IS IMPROPER AND IS A MISUSE OF CYBERPOWER PRODUCTS. 
The Limited Warranty and the Connected Equipment Guarantee are governed by the laws of the United States and the State of Minnesota, 
without reference to conflict of law principles. The application of the United Nations Convention of Contracts for the International Sale of 
Goods is expressly excluded. 
 
Contact Information: CyberPower's address is 5555 12th Ave East, Suite 110, Shakopee, MN 55379 and its phone number is (952) 
403-9500 or Toll-free: (877) 297-6937. CyberPower is the warrantor under this LimitedWarranty. You may also contact CyberPower on the 
Internet at www.cyberpowersystems.com.