CYP CLUX-DVI2SDIA User manual

Operation Manual
Operation Manual
CLUX-DVI2SDIA
DVI to 3G SDI Converter

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DDMMYY SUMMARY OF CHANGE
VS1 23/02/12 First release
VS2 11/07/12 SDI standards updated
VR3 03/08/12 DVI supports [email protected]

CONTENTS
1. Introduction..............................................1
2. Applications.............................................1
3. Package Contents ..................................1
4. System Requirements..............................1
5. Features....................................................1
6. Operation Controls And Functions ........2
6.1 Front Panel ......................................... 2
6.2 Rear Panel.......................................... 3
7. Connection Diagram ..............................4
8. Specications ..........................................5
9. Acronyms .................................................6

1
1. INTRODUCTION
The DVI to SDI Converter allows DVI-D signals to be shown on SDI
display while ensuring high bit rates of 2.970 Gbit/s to give you high
resolution signal without any loss. For professionals this means that it is
now easier to convert your high denition DVI signal with audio to SDI
for long distance transmission and display your work on SDI display. In
addition, the external audio input allows the user to insert the sound
from a different audio source instead of the DVI embedded audio,
and send to the SDI output.
2. APPLICATIONS
• PC/HD signal sending to SDI display
• DVI signal conversion to 3G-SDI display
3. PACKAGE CONTENTS
• DVI to 3G-SDI Converter
• 5 V/2.6 A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Input DVI source equipment with DVI cable and output SDI
monitor with SDI cable.
5. FEATURES
• Shows DVI source on SDI display
• SDI interface operates at bitrates of 2.970 Gbit/s, 2.970/1.001 Gbit/s,
1.485 Gbit/s, 1.485/1.001 Gbit/s and 270 Mb/s
• Converts DVI signals to SDI:
1. 480i/576i to SD-SDI (SMPTE 259M-C, at bitrates of 270 Mbit/s)
2. 720p/1080i to HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s or
1.485/1.001 Gbit/s)
3. 1080p to 3G-SDI (SMPTE 424M/425M-AB, at bitrates of
2.970 Gbit/s and 2.970/1.001 Gbit/s)

2
• Supports DVI input timings: [email protected], 576i, 720p@50/59.94/60,
1080i@50/59.94/60, [email protected]/24/25/29.97/30/50/59.94/60
• Supports SDI output distance up to 100 meters (3G-SDI), 200 meters
(HD-SDI), or 300 meters (SD-SDI)
Note: Tested with Belden 1694A Cable. Operating distances may
vary if used with cables of different specications.
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
321
1AUDIO IN: Connect to the audio source equipment (such as DVD
player) with a 3.5 mm phone jack for audio signal input.
2AUDIO SW: This switch allows the user to choose between audio
sources. Switch between the external (EXT) audio input (3.5 mm
phone jack) or the internal (INT) audio from an HDMI to DVI
adaptor input.
3DVI IN/HD TIMING: Connect to the DVI input source such as a PC
or laptop with a DVI cable or with a HDMI cable and HDMI to DVI
adaptor.

3
6.2 Rear Panel
POWER
LOCK
SDI OUT
DC 5V
1 432
1DC 5V: Plug the 5 V DC power supply into the unit and connect
the adaptor to AC wall outlet.
2POWER LED: This blue LED will illuminate when the device is
connected to the power supply.
3LOCK LED: This yellow LED will illuminate when both input source
and SDI output display has successfully sent and received the
signal.
4SDI OUT: Connect to the SDI output display.

4
7. CONNECTION DIAGRAM
POWER
LOCK
SDI OUT
DC 5V
PC
Laptop
(Alternate Audio)
SDI Monitor
DVI Cable
Audio Cable
(3.5mm)
SDI Cable
DVI to 3G-SDI
Converter

5
8. SPECIFICATIONS
Video Bandwidth 225 MHz/6.75Gbps
Input 1×DVI, 1×3.5 mm Phone Jack
Output 1×BNC (SD/HD/3G-SDI)
DVI Timing Support [email protected], 576i, 720p@50/59.94/60
1080i@50/59.94/60
[email protected]/24/25/29.97/30/50/59.94/60
SDI Timing Support SD-SDI:
SMPTE 259M-C, 270 Mbit/s
HD-SDI:
SMPTE 292M, 1.485 & 1.485/1.001 Gbit/s
3G-SDI:
SMPTE 424M/425M-AB, 2.970 &
2.970/1.001 Gbit/s
Audio Input Support Internal: PCM 2/5.1/7.1 CH
External: Analog 2 CH
ESD Protection Human-body Model:
±8 kV (Air-gap discharge)
±4 kV (Contact discharge)
Power Supply 5 V/2.6 A DC (US/EU standards, CE/FCC/
UL certied)
SDI Cable Distance 3G/HD/3G-SDI up to 100/200/300 meters with
BELDEN 1694A Cable
Dimensions 78.5 mm (W)×124 mm (D)×30 mm (H)
Weight 204 g
Chassis Material Aluminum
Silkscreen Colour Silver
Operating Temperature 0 ºC~40 ºC/32 ºF~104 ºF
Storage Temperature −20 ºC~60 ºC/−4 ºF~140 ºF
Relative Humidity 20~90% RH (non-condensing)
Power Consumption 4.3 W
Note: SDI supports SD resolutions of [email protected] and 576i@50 only. If
the input source is sending an incompatible resolution, this
may cause problems with the image or no image to be
displayed. Please ensure that the source device is set to output
in a compatible resolution.

6
9. ACRONYMS
ACRONYM COMPLETE TERM
3G Bandwidth 2.94 Gbps ≈ 3G
SDI Serial Digital Interface

Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD