CYP CSC-6010D User manual

CSC-6010D
4K UHD Multi-Format Scaler
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2016 by Cypress Technology.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
RDV1 22/04/16 Preliminary Release
RDV2 08/09/16 Update Web screenshot of status
and update page
RDV3 13/10/16 Add 4KUHD Bypass on WebGUI
, RS-232 command and OSD
menu. Add RS232 details.

CONTENTS
1. Introduction.............................................................................................. 1
2. Applications............................................................................................. 1
3. Package Contents .................................................................................. 1
4. System Requirements.............................................................................. 2
5. Features.................................................................................................... 2
6. Operation Controls and Functions......................................................... 3
6.1 Front Panel .......................................................................................... 3
6.2 Rear Panel........................................................................................... 5
6.3 WebGUI............................................................................................... 6
6.3.1 WebGUI Control Page.................................................................... 7
6.3.2 Power On/Off .................................................................................. 7
6.3.3 UHD 4K Bypass ................................................................................. 8
6.3.4 Input Source Selection and Auto Source Detection .................. 8
6.3.5 EDID & HDCP Settings ..................................................................... 9
6.3.6 Status Information ........................................................................... 9
6.3.7 Display Settings.............................................................................. 10
6.3.9 Ethernet Settings............................................................................ 12
6.3.10 Audio Settings.............................................................................. 12
6.3.11 Reset Options .............................................................................. 13
6.3.12 Setup ............................................................................................ 13
6.4 Telnet Control ................................................................................... 14
6.5 RS-232 Command List ...................................................................... 16
6.6 OSD (On Screen Display) Menu ..................................................... 23
6.7 Remote Control Unit ........................................................................ 29
6.8 D-sub 9 Pin Denition ....................................................................... 30
7. Connection Diagram ............................................................................ 31
8. Specications ........................................................................................ 32
8.1 Technical Specication................................................................... 32
8.2 Supported Timing Table................................................................... 33
8.3 Maximum HDMI cable length......................................................... 34

1
1. INTRODUCTION
This multi-format scaler features the three most popular input interfaces
utilized on source devices: HDMI, DisplayPort and VGA. This unit is an
ideal solution for use in conference rooms and showrooms and for any
customer who has a requirement to match disparate input sources
to the native resolution of a display. The maximum output resolution
supported is 4K@60Hz YUV 4:4:4 for both HDMI and DisplayPort inputs.
This unit comes packed with all of the adjustment options you are likely
to need when accommodating different sources including a wide
array of aspect ratio settings as well as contrast, brightness, saturation,
hue, sharpness, etc. all adjustable directly on the unit. Additionally
this unit brings the benet of an analog speaker output for ease of
integration when employed in conference centers, classrooms and
public venues. The auto source detection feature is designed to
switch to the most recently connected source automatically and to
switch to another live input if the current one becomes disconnected.
This unit is controllable via front panel controls (with OSD), WebGUI, IR
remote, telnet and RS-232. These comprehensive control interfaces
make operation easy and intuitive.
2. APPLICATIONS
• Entertainment Rooms & Home Theaters
• Showrooms & Demo Rooms
• Classroom & Lecture Hall Presentations
• Conference Rooms
• Public Commercial Displays
3. PACKAGE CONTENTS
• 1 x Scaler Unit
• 1 x Ear Phone to D-Sub Cable
• 1 x 5V / 3A DC Power Adaptor
• 1 x Remote Control Unit (Model: CR-171)
• 1 x Operation Manual

2
4. SYSTEM REQUIREMENTS
Input source equipment such as media players, PCs/laptops, video
game consoles or set-top boxes. HDMI receiving equipment such as
HDTVs, monitors or audio ampliers. Powered analog speakers are
recommended for optional audio support.
5. FEATURES
• Multiple input formats including HDMI, DisplayPort and VGA
• HDMI 2.0, HDCP 2.2, HDCP 1.4 and DVI 1.0 compliant
• Supports video timings up to 4K@60Hz YUV 4:4:4 over the HDMI and
DisplayPort inputs and over the HDMI output
• Auto source detection: Automatically switches to the most recently
connected input
• Wide range of aspect ratio settings including: full screen, 16:9, 16:10
and 4:3
• Direct adjustment of contrast, brightness, hue and saturation
• Audio mute function
• Analog stereo audio output with volume control
• EDID management support
• Comprehensive user interface options including: Front panel with
OSD, WebGUI, telnet, RS-232, and IR remote
• Firmware can be easily updated in the eld via USB

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER MENU ENTER SOURCE
- + HDMIDP VGA
1 2 3 4 5 6 7 8 9 10 11
1POWER : Press this button to power on the unit or place it into
stand-by mode.
2POWER LED:
a. Power on: LED will illuminate solid green.
b. Stand-by mode: LED will illuminate solid red. Telnet, RS-232 and
WebGUI remain active in stand-by mode.
3IR Window: Accepts IR signals from the included IR remote for
control of this unit only.
4MENU: Press to enter the OSD menu, or to back out from menu
items.
5ENTER: Press to conrm a selection or to go deeper into a menu
item.
6DOWN: Press to move down within menus or to decrease volume.
7UP: Press to move up within menus or to increase volume.
8SOURCE : Press to sequentially switch through the available inputs
(HDMI, VGA and DisplayPort).
9DP: When the selected input source is DisplayPort this LED will
illuminate solid green.
10 HDMI: When the selected input source is HDMI this LED will
illuminate solid green.
11 VGA: When the selected input source is VGA this LED will illuminate
solid green.

4
The following hotkey functions are also available:
1. Auto Adjust (only for VGA IN function): Press the ENTER button when
the OSD menu is not active and the input source is VGA to execute
the auto adjust function. The image will be automatically adjusted
to the optimal aspect ratio.
2. Factory Reset: Press and hold the MENU button when connecting
the power supply to force a factory reset of the unit.
3. XGA output: Press the MENU and “+” buttons at the same time to
set the output resolution to XGA.
4. 720p output: Press the MENU and “-” buttons at the same time to set
the output resolution to 720p60.
5. 720p output (alternate): Press and hold the ENTER button when
connecting the power supply to set the output resolution to 720p59.
6. Firmware Update: A rmware update can be performedvia
WebGUI, telnet and RS-232 command. It can also be performed by
holding the POWER button when connecting the power supply.

5
6.2 Rear Panel
DC 5V
RS232CONTROL
SERVICE
AUDIO
IN
AUDIO
OUT VGA INHDMI INHDMI OUTDP IN
1 2 3 4 5 6 87 9 10
1HDMI OUT : Connect to HDMI TVs, monitors or ampliers for digital
video and audio output.
2AUDIO OUT: Connect to powered speakers or an amplier for
stereo analog audio output.
3DP IN: Connect to DisplayPort source equipment such as a PC or
laptop.
4HDMI IN: Connect to HDMI source equipment such as a media
player, game console or set-top box.
5VGA IN: Connect to VGA source equipment such as a PC or
laptop.
6AUDIO IN: Connect to the stereo analog output of the device
connected to the VGA input port.
7SERVICE: This slot is reserved for rmware update use only. Please
plug a USB thumb drive into this slot to update the rmware.
8CONTROL: Connect directly, or through a network switch, to your
PC/laptop to control the unit via telnet/WebGUI.
9RS-232: Connect directly to your PC/laptop to send RS-232
commands to control the unit.
10 DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.