CYP QU-DV12DL User manual

QU-DV12DL
3G SDI to HDMI Converter
OPERATION MANUAL

DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
VS1 25/11/2011 First release
VR2 12/03/2012 Add Support Timings

CONTENTS
1. Introduction ...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features ..................................................6
5. Operation Controls and Functions .......7
5.1 Transmitter Front and Rear Panels ....... 7
5.2 Receiver Front and Rear Panels ............ 8
5.2 Receiver Front and Rear Panels ............ 9
5.4 RJ45 Pin Assignment ................................ 9
6. Connection Diagram .......................... 10
7. Specications ...................................... 11
8. Acronyms ............................................. 11

6
1. INTRODUCTION
The QU-DVI2DL Dual-Link DVI Distribution Amplier allows a single DVI-D
signal to be split into two DVI outputs. This device accepts both Single-
Link and Dual-Link DVI signals supporting up to WQXGA resolutions for
Dual-Link and WUXGA@RB for Single-Link DVI.
2. APPLICATION
Split a single Dual Link DVI signal to 2 Dual Link Monitors
3. PACKAGE CONTENTS
Dual-Link DVI Splitter
5V/2.6A or 4A DC adaptor
Operation manual
4. SYSTEM REQUIREMENT
Input source equipment such as PC with a Dual Link DVI capable graphics
card and Dual Link DVI compatible displays with Dual Link DVI cables.
5. FEATURES
Supports video resolutions up to WQXGA with Dual-Link DVI or
WUXGA with Single-Link DVI
Built-in adaptive equalizer provides long cable support
Supports EDID function
2.25Gbps Frequency Clock per channel (225MHz Clock Rate)
Supports PC resolutions: VGA to WQXGA
Supports HDTV resolutions : 480p to 1080p

7
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
DC 5V
Power
SYNC
Dual Link DVI IN
QU-12D
1 2 3 4
1 Dual-Link DVI IN
Connect to the input source such as PC/Graphic card with Dual-Link
DVI cable.
2 SYNC LED
This LED will illuminate when the input source has send out signal and
the output display is in power on status.
3 POWER LED
This LED will illuminate when the device is connected to power
adaptor with AC supply.
4 DC 5V
Plug the 5V DC power supply included in the package into the unit
and connect it to AC wall outlet.

8
6.2 Rear Panel
Dual Link DVI OUT Dual Link DVI OUT
1 2
2
1
Dual-Link DVI OUT 1&2
Connect to DVI Dual Link displays with Dual Link DVI cables.
Note: The device will detect OUT 1 as the primary EDID information
when both outputs are connected with an active monitor. However,
when only 1 output is detected then the device will treat that as the
primary EDID information.

9
7. CONNECTION DIAGRAM

10
8. SPECIFICATIONS
Video Bandwidth 2 x 165MHz
Input Port 1 x Dual-Link DVI
Output Ports 2 or 4 x Dual-Link DVI
I/O Support ResolutionVGA ~ WQXGA@60 / Dual-Link
VGA~ WUXGA@60RB / Single-Link
ESD Protection Human body model: ± 8kV(Air-gap discharge)
± 4kV(Contact discharge)
Power Supply 5V/2.6A for 2DDS or 5V/4A for 4DDS DC
(US/EU standards, CE/FCC/UL certied)
Dimensions 125 mm (W) × 102.5 mm (D) × 30 mm (H)/2DDS
141 mm (W) × 163 mm (D) × 38 mm (H)/4DDS
Weight 288g/2DDS, 670g/4DDS
Chassis Material Metal
Silkscreen Colour Black
Operating Temperature0 ˚C~40 ˚C / 32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C / −4 ˚F~140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 6.8 W/2DDS, 17W/4DDS
9. ACRONYMS
ACRONYM COMPLETE TERM
DVI Digital Visual Interface