Cypress CDVI-8 Installation manual

DVI Splitter
Operation Manual
CDVI-8

Introduction
Cypress CDVI-8 is a high performance HDCP compliant DVI distribution amplifier.
It allows one DVI or HDMI signal source to split up to eigh identical
and buffered outputs for connecting to 8 DVI displays simutaneously.
Features
1. Built-in EDID and HDCP bypass ensures each output to work independently.
2. When connecting to DVI display HDMI source and displays are compatible by
using the HDMI to DVI adaptor cable.
3. Supports a wide range of PC and HDTV resolutions from VGA to SXGA
and 480p to 1080p.
4. Can be cascaded up to 3 layers.
5. Each of the buffered output can run up to 15 meters.
Operation Controls and Functions
Front Panel
13
2
1. DVI input: Connect to the DVI or HDMI output of your source equipment such
as DVD player or PC graphic card.
2. DVI output 1/2/3: Connect to the digital input of your first display.
3. Power input: Plug the supplied 5VDC power supply into the unit and the led
will illuminate when connected.
Rear Panel
1
1. Power LED.
2. DVI output 4/5/6/7/8: Connect these ports to the digital input of each
output display.
POWER DVI OUT
4
DVI OUT
5
DVI OUT
6
DVI OUT
7
DVI OUT
8
DVI OUT
3
DVI OUT
2
DVI OUT
1
DVI IN
POWER
DC 5V
2

Specifications:
- Frequency bandwidth: 1.50Gbps(single link)
- Input/Output:1-in/8-out DVI female port
- Power consumption: 6W Max
- 5VDC universal power supply
- Operating temperature range: 0 ~ 70 C
- Operating humidity range: 30 to 80% RH
- Dimensions: 240(W) x103(D) x 29(H)mm
- Weight: 550gs
Connection and Installation
POWER DVI OUT
4
DVI OUT
5
DVI OUT
6
DVI OUT
7
DVI OUT
8
DVI OUT
3
DVI OUT
2
DVI OUT
1
DVI IN
POWER
DC 5V
DVD or Set-Top-Box
PC
DVI Cable
or
PC Monitor
HDMI
DVI to HDMI
Cable
LCD TV
HDMI
HDMI to
DVI Cable
DVI Cable
PC Monitor
DVI Cable
PC Monitor
DVI Cable
PC Monitor
DVI Cable
PC Monitor
DVI Cable
PC Monitor
DVI Cable
PC Monitor
DVI Cable