Cypress CH-12 User manual

Operation Manual
CH-12
1-in 2-out
HDMI SPLITTER

1
Introduction:
CH-12 is a high performance two-way HDMI distribution amplifier. It allows one
HDMI sources to connect up to 2 HDMI displays simutaneously.
1. SYNC LED:
The led will illuminate when the HDMI source signal is connected to the input.
2. POWER:
Plug the supplied 5VDC power Supply into unit. The LED will illuminate when
connected.
Features:
●HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant.
●Immediate picture pop-up upon connection to display TV.
●Built-in EDID simulator and HDCP key-set allows each output to work
independently when connecting to a HDMI display.
●Splits a HDMI source up to 2 outputs without signal loss.
●Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p.
●Maximum resolution band-width : 165MHz.
●Can be cascaded up to 3 layers, or more depending on your cable quality.
●Each of the buffered output can run up to 15 Meters @1600x1200.
1 2
HDMI Distribution Amp.
POWER
SYNC

2
Rear Panel:
1. HDMI input:
Connect to the HDMI or DVI output of your source equipment such as
DVD player or set-top-box.
2. HDMI outputs 1&2:
Connect each of these output ports to the HDMI input of a HDMI display.
3. Power:
Plug the 5V DC power supply into the CH-12 and connect the adaptor to
AC wall outlet.
Connection and Installation:
Specifications:
- Frequency bandwidth: 1.65Gbps(single link)
* Input: 1 x HDMI female port (Type A connector)
* Output: 2 x HDMI female ports (single link)
* 5VDC universal power supply
* Weights: 0.16kgs
* Dimensions: 145(W) x90(L) x 32(H)mm
Option: CHDMI-2 2-way HDMI splitter with Sturdy Metal Case.
3
1 2
DC 5V
INPUT OUTPUT 1 OUTPUT 2
LCD TVLCD TV
DVD
DC 5V
INPUT OUTPUT 1 OUTPUT 2