Cypress CIR-03 User manual

CIR-03 Infrared
Extender Box
and CIR-12 Infrared
Repeater
Operation Manual
CIR-03 & CIR-12

Revision History
Version No Date Summary of Change
V1 20081113 Preliminary Release
Precaution
Failure to follow the precautions described below may cause damage to
Infrared Extender and Repeater Box and void the warranty.
 DO NOT open the case. Doing so will void the warranty. If you find
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
 DO NOT use third-Party AC adapter or power cord. Doing so may
damage Infrared Extender and Repeater Box.
 DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
 DO NOT set any liquids or beverages on the drive as they may
damage Infrared Extender and Repeater Box.

Table of Contents
1
1
1
1
1
2
2
2
3
4
1. Introduction…………………………………………………........……….
2. Application…………………………………………………................….
3. Contents……………………………………………….........................…
4. System Require…………………………………….…………........…….
5. Features…………………………………………….......……........………
6. Operation Controls and Functions……………….......……........………
6.1 Front Panel ..............................................................................
6.2 Rear Panel ………………………………………….........…….…
7. Connection and Installation……………………………........……..…
8. Specication……………………………………………...........…………

1. Introduction
IR Extender and Repeater Box is a perfect pair device for controlling source
equipments in long distanced. Through build-in IR receiver and CAT5 cable
user are able to control up to five source equipments in the same time and
in 250 meters long with existing remote controls. There is no space limitation
with the device which means even when the source equipment is in a
different room or different levels from the displayer, the performance stay the
same. IR extender and repeater allow user to control and display the desire
source instantly.
2. Application
 Hyper market displayer display.
 Show window displayer display.
 Lecture room display.
 Home or individual display.
3. Contents
 Infrared Extender Box (CIR-03)
 Infrared Repeater Box (CIR-12)
 1pc IR Eye Receiver cable (CIR-12)
 5pcs IR Eye blaster cables (3pcs for CIR-03, 2pcs for CIR-12)
 1pcs 5V DC power supply adaptor
 Operation Manual
4. System Require
Input source equipments, output displayer connect with source equipments
and CAT 5 cable.
5. Features
 Support five(5) output (3 from CIR-03, 2 from CIR-12).
 Control source equipments anywhere within 250 meters, even through
walls and ceilings.
 Send No audio/video, but just infrared signals.
 Using existing remote controls.
 One IR Receiver only.
 IR Receiver's frequency is at 20~60 KHz.
1

①IR OUT1, 2 and 3: Connect your IR Eye Blaster cables each at 2M long to
control source equipments.
②IR IN: Connect to IR Eye receiver cable (2M long) for receiving IR remote
control signal.
6. Operation Controls and Functions
6.1 Front Panel
IR CAT5
DC 5V
1 2
①IR CAT5: Connect CAT 5 cable to next Infrared Extender Box with IR
receiver.
②Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
1 2
IR OUT1
CIR-03 IR Extender
IR OUT2IR OUT3 IR IN
CIR-12 IR Repeater
IR OUT1IR OUT2
1
6.2 Rear Panel
Note: Only a power adapter is needed, Connect the power adapter on
either CIR-03 or CIR-12.
2

7. Connection and Installation
IR CAT5
CIR-12
CIR-03
7m
3m
3m
3m
3m
3m
3

Input Port 1 x IR receiver
Output ports 1 x CAT5 (CIR-03, CIR-12)
5 x IR extender (3 x CIR-03, 2 x CIR-12)
Power Supply 1 x 5V/500mA DC (US/EU standards, CE/FCC/UL
certified for CIR-12.)
Dimensions (mm) 62(W) x 50(D) x 23(H)
Weight(g) 78
Chassis Material Aluminum
Silk Skin Color Silver
Operating Temperature Operating from 0°C ~ 40°C
Power Consumption 0.5w
8. Specications
Note: A. IR receiver's control distance can goes up to 7 meters long with
open space and direct angle.
B. IR extender's Control distance can goes up to 3 meters with open
Space and direct angle.
4