Cypress CLUX-SDI2HC User manual

CLUX-SDI2HC
3G-SDI Extender with HDMI Converter
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
V1 07/06/10 Preliminary Release
VR2 02/12/10 Storage Temperature
VR3 04/07/11 Add Support Timing
VR4 28/09/11 Spec. Position Change
VS5 11/07/12 Updated format/diagrams/SDI
standards
VS6 19/07/12 First release

CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panels.......................................3
6.2 Rear Panel.........................................4
7. Connection Diagram ............................ 5
8. Specications ........................................ 6
9. Acronyms ............................................... 7

1
1. INTRODUCTION
The SDI to HDMI Converter allows SD, HD and 3G-SDI signals to
be shown on HDMI display. This means that it is now easier for
professionals to distribute and extend their SDI signal while giving the
ability to display work on HDMI displays. Furthermore, thanks to L/
R audio outputs users can output audio in analog formats while the
loop-through 3G-SDI design benets users by letting them simultaneous
show content on both SDI and HDMI displays.
2. APPLICATIONS
• SDI signal loop-out and extension
• Converts SDI signal (SD/HD/3G) to HDMI
3. PACKAGE CONTENTS
• 3G SDI to HDMI Extender
• 5V/2.6A DC power adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
• Source SDI input with an SDI cable and output to SDI and/or HDMI
displays with suitable connection cables.

2
5. FEATURES
• Supports SD-SDI, HD-SDI and 3G-SDI input signals with auto-detection
• Supports HDMI and SDI (bypass) output simultaneously
• SDI interface operates at bitrates of 2.970 Gbit/s, 2.970/1.001 Gbit/s,
1.485 Gbit/s, 1.485/1.001 Gbit/s and 270 Mb/s
• Converts SDI signal to HDMI:
1. SD-SDI (SMPTE 259M-C) to 480i/576i
2. HD-SDI (SMPTE 292M) to 720p@50/59.94/60, 1080i@50/59.94/60
3. 3G-SDI (SMPTE 424M/425M-AB) to [email protected]/24/25/29.97/30/
50/59.94/60, [email protected]/24/25/29.97/30
• Supports SDI input modes:
1. SD-SDI (SMPTE 259M-C, at bitrates of 270 Mbit/s)
2. HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s and
1.485/1.001 Gbit/s)
3. 3G-SDI (SMPTE 424M/425M-AB, at bitrates of 2.970 Gbit/s and
2.970/1.001 Gbit/s)
• Equalized and re-clocked loop output
• Alternative audio output to coaxial and analog 2 CH
• Supports SDI input/output distance up to 100 meters (3G-SDI), 200
meters (HD-SDI), or 300 meters (SD-SDI)
Note: Tested with Belden 1694A cable. Operating distances may vary
with other specications of cable.

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panels
Power Video
Lock
Audio
Lock
HDMI/
DVI
R
Audio Out
L
3G HD SD
3GSDI to HDMI CLUX-SDI2HC
HDMI Out
9765
21 3 4
8
1
Power LED: The LED will illuminate red when the device is
connected to a power supply.
2
Video Lock LED: The LED will illuminate green when both the input
SDI source and the output HDMI display have successfully sent and
received a signal.
3
Audio Lock LED: The LED will illuminate green when the input SDI
source has an audio signal and when the output HDMI/DVI display
is active.
4
HDMI/DVI LED: The LED will illuminate green only when connected
to an HDMI display. It will remain off when connected to a DVI
display. The device will read the output display’s EDID information
and automatically determine whether to send a HDMI or DVI
signal.
5
3G LED: This LED illuminate yellow when a 3G-SDI input signal is
detected.
6
HD LED: This LED illuminate yellow when a HD-SDI input signal is
detected.
7
SD LED: This LED illuminate yellow when a SD-SDI input signal is
detected.
8
Audio out R/L: Analogue audio output (L/R Stereo). Connect to an
amplier or recording device with a suitable analogue input.
9
HDMI Out: Connect to a HDMI equipped display or to a DVI Display
with a HDMI to DVI adaptor cable.

4
6.2 Rear Panel
SDI IN SDI OUT DC 5V
1 2 3
1
SDI IN: Connect to the SDI output of the SDI source device.
Accepts SD,HD or 3G SDI signals.
2
SDI OUT: Provides a 'loop-through' SDI signal output for connection
to a SDI display or device. Can be connected to another SDI to
HDMI converter/extender to extend the signal or to connect to
multiple displays for mirrored output.
3
DC 5V: Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC outlet.

5
7. CONNECTION DIAGRAM
Power Video
Lock
Audio
Lock
HDMI/
DVI
R
Audio Out
L
3G HD SD
3GSDI to HDMI CLUX-SDI2HC
HDMI Out
SDI IN SDI OUTDC 5V
SDI IN SDI OUTDC 5V
OR
Amplier
Stereo
Audio
Output
HDMI
Output
SDI Input
SDI Output
SDI DisplayCascade to
another Unit
SDI Camera
HDMI Display

6
8. SPECIFICATIONS
SMPTE Standard 425M Level A & B, 424M, 292M, 259M-C
SDI Transmission Rates 2.970 Gbps, 2.970/1.001 Gbps
1.485 Gbps, 1.485/1.001 Gbps and 270
Mbps
Video Bandwidth 225 MHz/6.75Gbps
Input 1×BNC (SD/HD/3G-SDI)
Output 1×BNC (SD/HD/3G-SDI), 1×HDMI, 2×RCA
SDI Timing Support SD-SDI:
SMPTE 259M-C, 270 Mbit/s
HD-SDI:
SMPTE 292M, 1.485 & 1.485/1.001 Gbit/s
3G-SDI:
SMPTE 424M/425M-AB, 2.970 &
2.970/1.001 Gbit/s
HDMI Timing Support 480i, 576i, 720p@50/59.94/60
1080i@50/59.94/60
[email protected]/24/25/29.97/30/50/59.94/60
SDI Cable Distance 3G/HD/3G-SDI up to 100 /200/300 meters
with BELDEN 1694A Cable
Power Supply 5 V DC/2.6 A (US/EU standards, CE/FCC/
UL certied)
ESD Protection Human-body Model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Dimensions 137 mm (W)×90 mm (D)×25 mm (H)
Weight 225 g
Chassis Material Aluminum
Silkscreen Color Black
Operating Temperature 0 °C~40 °C/32 °F~104 °F
Storage Temperature −20 °C~60 °C/−4 °F~104 °F
Relative Humidity 20~90 % RH (Non-condensing)
Power Consumption 4 W

7
9. ACRONYMS
ACRONYM COMPLETE TERM
3G Bandwidth 2.97Gbps ≈ 3G
DVI Digital Visual Interface
HDCP High-bandwidth Digital content protection
HDMI High Denition Multimedia Interface
SDI Serial Digital Interface

Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD