Cypress CLUX-SDI2HC User manual

CLUX-SDI2HC
3G SDI Extender with
HDMI Converter
Operation Manual
CLUX-SDI2HC

Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2009 by Cypress Technology.
All Rights Reserved.
Version 1.0 October 2009
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
 Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
 To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
 To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20100607 Preliminary Release
VR2 20101202 Storage Tempeerature

Table of Contents
1. Introduction..................................................................................1
2. Applications.................................................................................1
3. PackageContents......................................................................1
4. Features........................................................................................1
5. SystemRequirements..................................................................1
6. Specifications..............................................................................2
7. OperationControlsandFunctions............................................. 3
7.1 Front Panel ..................................................................... 3
7.2 Rear Panel ..................................................................... 4
8. ConnectionandInstallation..................................................... 5

1. Introduction
The SDI to HDMI converter allows SD-SDI, HD-SDI and 3G-SDI signals to be shown
on HDMI/SDI displays while ensuring high bit rates of 2.970 Gbit/s to give you fast
signal transmission without any loss. For professionals this means that it is now
easier to distribute and extend your 3G SDI signal while giving you the ability
to display your work on HDMI displays thanks to the built in HDMI converter.
Furthermore, thanks to the loop-through 3G-SDI design, users are able to enjoy
both SDI and HDMI displays at the same time.
2. Applications
• Connect to multiple displays by linking one 3G SDI Extender to another
through its SDI output port. When connected to another 3G SDI Extender,
you can broadcast a signal to two HDMI displays and one SDI display, or
connect to another Extender to provide more connections and a longer
operating distance.
• Convert 3G SDI to HDMI
3. Package Contents
• 3G SDI to HDMI Converter
• 5V/2.6A DC power adaptor
• Operation Manual
4. System Requirements
Input broadcast video with an SDI cable and output to SDI and/or HDMI
displays with included connection cables.
5. Features
• Operation at 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.001Gbit/s
and 270Mbits/s
• Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M,
SMPTE 259M-C
• Equalized and re-clocked loop output
• Integrated audio de-embedder for a maximum of 8 channel, 48 kHz audio
• Auto video mode detection (3G/SD/HD)
• Conversion from SMPTE 425M level B to Level A 1080p 50/59.94/60 4:2:2 10-bit
• Connect with other units to extend your signal over long distances
• Simultaneous display with SDI and HDMI signals
• Supports signal transmission distances of up to 300M for SDI signals, 200M for
HD signals and 100M for 3G signals
Note:Cable tested with Belden 1694A. Operating distances may vary if
used with another type of cable.
1

6. Specications
SMPTE Standard 425M Level A & B, 424M, 292M, 259M-C
SDI Transmission Rates 2.970 Gbit/s and 2.970/1.001 Gbit/s
Frequency Bandwidth 225MHz/link (HDMI 1.3)
Input Port 1 x BNC (SDI/HD-SDI/3G-SDI)
Output Port 1 x BNC (SDI/HD-SDI/3G-SDI),
1 x HDMI, 2 x RCA Jack
Video Supports 480i, 576i, HD-SDI-720p, 1080i, 3G-SDI-1080p
Power Supply 5V DC/ 2.6A (US/EU standards, CE/FCC/UL
certied)
ESD Protection Human body model: ±8kV (air-gap discharge)
±4kV (contact discharge)
SDI Cable Distance 3G up to 100M (BELDEN 1694A)
HD up to 200M (BELDEN 1694A)
SD up to 300M (BELDEN 1694A)
Dimension (mm) 137(W) x 90(D) x 25(H)
Weight (g) 225
Chassis Material Aluminum
Silkscreen Color Black
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C~60°C / -4°F ~ 104°F
Relative Humidity 20 ~ 90% RH (Non-condensing)
Power Consumption (W) 4
2

7. Operation Controls and Functions
7.1FrontPanel
5
2
6
3
7
41
8 9
1. Power LED: This red LED will switch on when the device is connected with
the power supply.
2. Video Lock LED: This green LED will turn on when both the input SDI
source and the output HDMI display have sent and received a signal.
3. Audio Lock LED: This green LED will switch on when the input SDI source
has an audio signal and when the output HDMI/DVI display activates.
4. HDMI/DVI LED: This green LED will turn on when connected to an HDMI
display and will not switch on when connected to a DVI display. The
device will read the output display’s EDID to determine whether to send
an HDMI or DVI signal.
5. 3G LED: This yellow LED will turn on when the input SDI signal is 3G.
6. HD LED: This yellow LED will switch on when the input SDI signal is HD.
7. SD LED: This yellow LED will turn on when the input SDI signal is SD.
8. Audio out R/L: These slots are where you connect an amplier with a
RCA jack to, in order to transmit an audio signal.
9. HDMI Out: This slot is where you connect a HDMI / DVI display with a
HDMI or HDMI to DVI cable to.
3

7.2RearPanel
1 2 3
1. SDI IN: This slot is where you connect the SDI source to, in order to send a
SDI signal to a display.
2. SDI OUT: This slot is where you connect the SDI display to, with an SDI
cable for displaying images. Connect it to another SDI to HDMI
converter/ extender to extend your signal or connect to multiple displays.
3. DC 5V: Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet. The red LED will turn on when the power is on.
4

8. Connection and Installation
5
DVD RecorderHD TVMonitor
Video Camera
AmplierSony
LMD-245W
CLUX-SDI2HC
or or or

Acronyms A
Acronym Complete Term
3G Bandwidth 2.97Gbit/s ≈ 3G
SDI Serial Digital Interface
6

MPM-SDI2HC
Home page: http://www.cypress.com.tw
CYPRESSTECHNOLOGYCO.,LTD.