Cypress CMLUX-24S User manual

CMLUX-24S
2 by 4 HDMI V1.3 Matrix
Operation Manual
CMLUX-24S

Revision History
Version No. Date Summary of Change
V1 20081111 Preliminary Release
V2 20090407 HDMI Cable distance&
Remote Control distance.
Precaution
Failure to follow the precautions described below may cause damage to
HDMI 1.3 Matrix Box and void the warranty.
 DO NOT open the case. Doing so will void the warranty. If you find
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
 DO NOT use third-Party AC adapter or power cord. Doing so may
damage HDMI 1.3 Matrix.
 DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
 DO NOT set any liquids or beverages on the drive as they may
damage HDMI 1.3 Matrix.

Table of Contents
1
1
1
1
2
3
4
5
5
6
7
8
1. Introduction.....…………………………………………................................
2. Application.............................………………………………………….....…
3. Package Contents...............................……………………………….…….
4. System Requirement................................……………………………..……
5. Features................................………………………………………...………..
6. Installation................................…………………………………...…………..
7. Front View................................…………………………………...…………..
8. Remote Control.......................…………………………………...……….….
9. RS-232 Protocal.......................…………………………………...…………..
9.1 Commands.......................…………………………………...…………..
10. Connection and Installation..................................................................
11. Specications..........................................................................................

1. Introduction
Thank you for purchasing HDMI V1.3 Matrix. While HDMI products are getting
more and more popular in the market people usually have more than one
HDMI devices and sources in one place. HDMI V1.3 Matrix provides the
excellent solution for connecting all the devices and sources together for
your convenience use, it also provides you a variety of choices on where
to play your images with remote controller. Further, HDMI V1.3 Matrix can
transfer Deep Color video and bit stream digital audio with maximum
performance and it supports HDMI 1.3, HDCP 1.1 and DVI 1.0.
Please follow this manual to begin enjoying the benefit of your HDMI 1.3
Matrix. We suggest keeping it in a safe place for future reference.
2. Application
 High performance HDMI 1.3 Matrix of 2 (two) input and 4 (four) output
with remote control for you to link with your favor HDMI devices to
enjoying movies, music, or games at once.
 When HDMI signal progresses through the system, it is re-timed, and level-
compensated.
 Define HDCP, HDMI and DVI source. The LED light will light up to define
the input sources’format.
 Switchable EDID function for choosing the native resolution to display.
3. Package Contents
 2 by 4 V1.3 HDMI Matrix.
 Remote Control CR33 (with Battery)
 IR Receiver
 Power Cord
 5V DC power supply adaptor.
 Operation Manual.
4. System requirement
HDMI input device(s) and HDMI output device(s).
1

5. Features
 HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant.
 Supports digital video formats in Deep Color 12bit and new lossless
compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio)
digital audio.
 The HDMI input is compensated, clock / phase adjusted, and jitter
eliminated so the output is a brand new standard HDMI signal.
 Supports input source LED indicators on each output select.
 Compatible with all HDMI sources and displays.
 Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p.
 Supports RS-232 control.
 Supports IR remote control and IR extender.
 Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate).
 Supports LPCM7.1 channels output from each independent HDMI ports.
 HDMI cable distance test with 1080p/8bit resolution, the Input/Output
source can run up to 10/10 meters. If 1080p/12bit the Input/Output
source can run up to 10/6 meters.
2

6. Installation
1 EDID Control Switcher: Default factory setting is TV, leave as it is when the
displays are working properly. Switch to STD to use build-in EDID Detail
capability in Note.
2 RS-232 communication port: Connect the COM port of your PC for the
distant control over RS-232 channel. Detail specification in section 9.
3 HDMI outputs: Connect each of these output ports to the HDMI display(s).
4 HDMI inputs: Connect input ports to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
5 Power: Plug the 5VDC power supply into the unit and connect the adaptor
to AC wall outlet.
6 IR extender.
Note: 1. EDID Control Switch: STD(INT) and TV(EXT), Default setting is TV
2. When EDID is on TV: Leave as it is if display is properly, unit will detect
the first HDMI output source’s EDID and record in the unit. If the first
detected output source is DVI it will pass to next source, until the first
HDMI been detected. The detection priority is HDMI v1.3 > HDMI v1.2
> DVI.
3. When EDID is on STD: unit use build-in EDID
Video Support->1080p 12bit(max)
Audio Support->PCM2
4. Your EDID Selection will only activated when the unit is replug and
power on.
1
2
3 4 5 6
HDMI OUTPUT HDMI INPUT
STD TV
EDID
RS-232
D C B A 2 1
DC 5V
IR
3

7. Front View
1
1 Remote control sensor.
2 Power switch & LED Indicator: Green LED will illuminate when the power is
turned on and Red LED will illuminate when power is turned off.
3 Input Select/Indicators (A): Press the HDMI out “A”button repeatedly to
switch to your desired source and the LED will illuminate to indicate which
input source is being selected and routed to HDMI A output. Also, when
the input source is HDMI/DVI the HDMI/DVI LED will illuminate, if the input
source with the HDCP protection the HDCP LED will illuminate.
4 Input Select/Indicators (B): Press the HDMI out “B”button repeatedly to
switch to your desired source and the LED will illuminate to indicate which
input source is being selected and routed to HDMI B output. Also, when
the input source is HDMI/DVI the HDMI/DVI LED will illuminate, if the input
source with the HDCP protection the HDCP LED will illuminate.
5 Input Select/Indicators (C): Press the HDMI out “C”button repeatedly to
switch to your desired source and the LED will illuminate to indicate which
input source is being selected and routed to HDMI C output. Also, when
the input source is HDMI/DVI the HDMI/DVI LED will illuminate, if the input
source with the HDCP protection the HDCP LED will illuminate.
6 Input Select/Indicators (D): Press the HDMI out “D”button repeatedly to
switch to your desired source and the LED will illuminate to indicate which
input source is being selected and routed to HDMI D output. Also, when
the input source is HDMI/DVI the HDMI/DVI LED will illuminate, if the input
source with the HDCP protection the HDCP LED will illuminate.
7 HDCP Source light: When the input source(s) have HDCP, HDMI 1.3 Matrix
will detect the code and send to output source(s).
8 HDMI/DVI Source light: When the input source(s) is HDMI format, the led
light will light up.
2 3 4 5 6 7 8
CMLUX-24S
2X4 HDMI v1.3 Matri x
POWER
INPUT
1 2 HDCP HDMI/DVI
INPUT
1 2 HDCP HDMI/DVI
INPUT
1 2 HDCP HDMI/DVI
INPUT
1 2 HDCP HDMI/DVI
A BHDMI OUT C DHDMI OUT
4

8. Remote Control
1. Power: Press the button to turn on/ff the unit.
2. Input Select for HDMI OUT A: Press 1or 2 to
select the desired input source for HDMI OUT A.
3. Input Select for HDMI OUT B: Press 1or 2 to select
the desired input source for HDMI OUT B.
4. Input Select for HDMI OUT C: Press 1or 2 to
select the desired input source for HDMI OUT C.
5. Input Select for HDMI OUT D: Press 1or 2 to
select the desired input source for HDMI OUT D.
*Notes: Selection 3&4 are not functioning for this
model.
9. RS-232 Protocal
Pin Denition
CMLUX-24S Remote Control Console
PIN Denition
→
←
PIN Denition
1 NC 1 NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
1
2
3
4
5
A
D
C
B
OUTPUT
OUTPUT
OUTPUT
OUTPUT
POWER
CR-33
Baud Rate: 9600bps
Data bit: 8bits
Parity: None
Stop bit: 1bit
Flow Control: None
5

9.1 Commands
COMMAND ACTION
POWER 00 Power Off (standby)
POWER 01 Power On
PORT 11 Output A select Input1
PORT 12 Output A select Input2
PORT 13(No Function) Output A select Input3
PORT 14(No Function) Output A select Input4
PORT 21 Output B select Input1
PORT 22 Output B select Input2
PORT 23(No Function) Output B select Input3
PORT 24(No Function) Output B select Input4
PORT 31 Output C select Input1
PORT 32 Output C select Input2
PORT 33(No Function) Output C select Input3
PORT 34(No Function) Output C select Input4
PORT 41 Output D select Input1
PORT 42 Output D select Input2
PORT 43(No Function) Output D select Input3
PORT 44(No Function) Output D select Input4
6

10. Connection and Installation
PS3
DVD
HD TV HD TV
HD TV HD TV
30˚30˚
3 M
7 M
3 M
OUTPUT
A
OUTPUT
D
OUTPUT
C
OUTPUT
B
POWER
CR-33
7

Frequency bandwidth 2.25Gbps (single link)
Input ports 2 x HDMI female ports,
Output ports 4 x HDMI female ports
EDID Standard, TV/Moving Port 1
HDMI Audio output PCM2, PCM5.1, PCM7.1, Dolby5.1, DTS5.1, DD+, D-
TrueHD, DTS-HD
HDMI Cable in 1080p 8bit (10M), 1080p 12bit (10M)
HDMI Cable out 1080p 8bit (10M), 1080p 12bit (6M)
Color Space RGB_24/36,YCbCr 4:4:4_24/36, YCbCr 4:2:2,xvycc
IR Yes
Deep Color 1080p 12bit
HDMI Resolution 480I~1080p 50/60, 1080p 24, VGA~UXGA
DVI Resolution 480I~1080p 50/60, 1080p 24, VGA~UXGA
Power Supply 5VDC/5A (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 438(W) x 175(D) x 49(H)
Weight(g) 3100
Chassis Material Metal
Silk Skin Color Black
Operating Temperature Operating from 0°C ~ 40°C
Power Consumption 8W(Max)
11. Specications
8

20081111 MPM-CMLUX24S
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.