Cypress CY8CKIT-008 User manual

PS O C® DEVELOPMENT KIT QUICK START GUIDE
PSOC DEVELOPMENT BOARD SELF TEST
• Remove the PSoC Development Board
from the kit package.
1
• Connect the AC power supply adapter.
2
• After the self-test, read the success message on
the LCD screen.
Download and install the PSoC CreatorTM IDE, PSoC Programmer, Kit Design Files,
Documentation, and Examples from www.cypress.com/CY8CKIT-001
3

PSoC Processor
Module Socket
LCD Contrast
P7:40-pin GPIO
Expansion Port
P6:46-pin GPIO
Expansion Port
P5: 40-pin GPIO
Expansion Port
P8: 40-pin GPIO
Expansion Port
LCD Module
Adjustable Regulator
Variable Resistor
Board Reset Button
Power Source Switch
(3.3 V/5.0 V)
AC Power Supply Adapter
9-V DC Power
Supply Adapter
RS-232 Interface
Mini-B USB Interface
Prototyping
Breadboard
Wireless 12-pin
Module Interface
CapSense®, Switches,
and LED I/Os
Variable Resistor/
Potentiometer
10-pin JTAG/SWD/SWV Debug and Programming Header
PSoC Devices
10-pin Trace Header
PSoC CY8C38 Family Processor Module PSoC CY8C58LP Family Processor Module
PS O C® DEVELOPMENT KIT QUICK START GUIDE
PSOC DEVELOPMENT BOARD SELF TEST
© 2009-2020 Cypress Semiconductor Corporation. All rights reserved.
All trademarks or registered trademarks referenced herein are the
property of their respective owners. 001-53756 Rev.*G
For the latest information on this kit, visitFor the latest information on this kit, visit www.cypress.com/CY8CKIT-001