Cypress CY8CKIT-148 User manual

CY8CKIT-148
PSoC® 4700S Inductive Sensing
Evaluation Kit Guide
Doc. #: 002-23165 Rev. *B
Cypress Semiconductor
198 Champion Court
San Jose, CA 95134-1709
www.cypress.com

Copyrights
CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 2
Copyrights
© Cypress Semiconductor Corporation, 2018. This document is the property of Cypress Semiconductor Corporation and its
subsidiaries, including Spansion LLC ("Cypress"). This document, including any software or firmware included or referenced
in this document ("Software"), is owned by Cypress under the intellectual property laws and treaties of the United States and
other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically
stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If
the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress
governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable license (with-
out the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to mod-
ify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b)
to distribute the Software in binary code form externally to end users (either directly or indirectly through resellers and distrib-
utors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress's patents that are infringed by
the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with
Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohib-
ited.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. No computing device can be absolutely secure. Therefore, despite security measures implemented in Cypress hard-
ware or software products, Cypress does not assume any liability arising out of any security breach, such as unauthorized
access to or use of a Cypress product. In addition, the products described in these materials may contain design defects or
errors known as errata which may cause the product to deviate from published specifications. To the extent permitted by
applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not
assume any liability arising out of the application or use of any product or circuit described in this document. Any information
provided in this document, including any sample design information or programming code, is provided only for reference pur-
poses. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of
any application made of this information and any resulting product. Cypress products are not designed, intended, or autho-
rized for use as critical components in systems designed or intended for the operation of weapons, weapons systems,
nuclear installations, life-support devices or systems, other medical devices or systems (including resuscitation equipment
and surgical implants), pollution control or hazardous substances management, or other uses where the failure of the device
or system could cause personal injury, death, or property damage ("Unintended Uses"). A critical component is any compo-
nent of a device or system whose failure to perform can be reasonably expected to cause the failure of the device or system,
or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress
from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall
indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities, including claims for
personal injury or death, arising from or related to any Unintended Uses of Cypress products.
Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB,
F-RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more
complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respec-
tive owners.

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 3
Contents
Safety Information 5
1. Introduction 7
1.1 Kit Contents .................................................................................................................8
1.2 PSoC Creator ..............................................................................................................9
1.2.1 PSoC Creator Code Examples ......................................................................10
1.2.2 Kit Code Examples.........................................................................................11
1.2.3 PSoC Creator Help ........................................................................................11
1.2.4 Component Datasheets .................................................................................12
1.3 Getting Started...........................................................................................................12
1.4 Additional Learning Resources..................................................................................13
1.5 Technical Support......................................................................................................13
1.6 Document Conventions .............................................................................................14
1.7 Acronyms...................................................................................................................15
2. Software Installation 16
2.1 Before You Begin.......................................................................................................16
2.2 Install Software ..........................................................................................................16
2.3 Installing PSoC 4700S Device in PSoC Creator........................................................19
2.4 Installing the MagSense Component.........................................................................20
2.5 Uninstall Software......................................................................................................21
3. Kit Operation 22
3.1 Theory of Operation...................................................................................................22
3.2 Programming and Debugging the Target PSoC 4700S Device.................................24
3.2.1 Programming Using PSoC Creator ................................................................24
3.2.2 Debugging Using PSoC Creator ....................................................................26
3.2.3 Programming Using PSoC Programmer ........................................................26
3.2.4 Mass Storage Programming ..........................................................................26
3.3 USB-UART Bridge .....................................................................................................26
3.4 USB-I2C Bridge .........................................................................................................27
3.5 Updating the KitProg2 Firmware................................................................................27
4. Code Examples 28
4.1 Using the Kit Code Examples ....................................................................................28
4.2 Using Built-in PSoC Creator Code Examples with the Kit .........................................32

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 4
Contents
Appendix 35
A.1 Board Details ............................................................................................................35
A.2 Hardware Details ......................................................................................................36
A.2.1 Target Board .................................................................................................36
A.2.2 KitProg2 Board ..............................................................................................37
A.2.3 Power Supply System ...................................................................................38
A.2.4 Header Connections .....................................................................................39
A.2.5 User and Passive Inputs ...............................................................................40
A.3 PSoC 4700S Inductive Sensing Evaluation Kit Schematics .....................................49
A.4 Bill of Materials .........................................................................................................49
Revision History 50

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 5
Safety Information
Regulatory Compliance
The CY8CKIT-148 PSoC 4700S Inductive Sensing Evaluation Kit is intended for use as a evaluation
platform for hardware or software in a laboratory environment. The board is an open system design,
which does not include a shielded enclosure. This may cause interference to other electrical or
electronic devices in close proximity. In a domestic environment, this product may cause radio
interference. In such cases, you may be required to take adequate preventive measures. In addition,
this board should not be used near any medical equipment or RF devices.
Attaching additional wiring to this product or modifying the product operation from the factory default
settings may affect its performance and cause interference with other apparatus in the immediate
vicinity. If such interference is detected, suitable mitigating measures should be taken.
The PSoC 4700S Inductive Sensing Evaluation Kit, as shipped
from the factory, has been verified to meet with requirements of
CE as a Class A product.
The CY8CKIT-148 PSoC 4700S Inductive Sensing Evaluation Kit
contains electrostatic discharge (ESD) sensitive devices. Electrostatic
charges readily accumulate on the human body and any equipment, and
can discharge without detection. Permanent damage may occur on
devices subjected to high-energy discharges. Proper ESD precautions
are recommended to avoid performance degradation or loss of
functionality. Store unused CY8CKIT-148 PSoC 4700S Inductive
Sensing Evaluation Kit boards in the protective shipping package.
End-of-Life/Product Recycling
This kit has an end-of life five years from the date of manufacture
mentioned on the back of the box. Contact your nearest recycler for
discarding the kit.

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 6
Safety Information
General Safety Instructions
ESD Protection
ESD can damage boards and associated components. Cypress recommends that you perform
procedures only at an ESD workstation. If such a workstation is not available, use appropriate ESD
protection by wearing an anti-static wrist strap attached to the chassis ground (any unpainted metal
surface) on your board when handling parts.
Handling Boards
The CY8CKIT-148 PSoC 4700S Inductive Sensing Evaluation Kit board is sensitive to ESD. Hold
the board only by its edges. After removing the board from its box, place it on a grounded, static-free
surface. Use a conductive foam pad if available. Do not slide board over any surface.

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 7
1. Introduction
The PSoC 4700S Inductive Sensing Evaluation Kit is designed as an easy-to-use and inexpensive
evaluation platform. The PSoC 4700S Inductive Sensing Evaluation Kit supports the PSoC 4700S
device, delivering a complete system solution for a wide range of embedded applications at a very
low cost. The PSoC 4700S device is a true programmable embedded system-on chip, integrating
custom digital peripheral functions, memory, and an ARM® Cortex®-M0+ MCU on a single chip with
flexible automatic routing. The programmable digital peripheral functions allow higher flexibility, in-
field tuning of the design, and faster time-to-market. It is a combination of MCU with standard
communication and timing peripherals, and a inductive sensing system with best in class
performance.
The PSoC 4700S Inductive Evaluation Kit offers a complete solution for Inductive Sensing
Technology with PSoC 4700S device. This kit provides a low-cost alternative to device samples
while providing a platform to easily develop and integrate the PSoC 4700S device into your end-
system. In addition, the board includes the following features:
■Seven LEDs to provide feedback for 4700S device
■KitProg2 Status LED and Mode switch
■Three Inductive Sensing button coils and one Proximity coil for Inductive Sensing evaluation
■Reset switch
■USB Type-C Connector
■3.3 V operation
The CY8CKIT-148 PSoC 4700S Inductive Sensing Evaluation Kit also integrates a Cypress
KitProg2 that enables onboard programming, debugging, and bridging functionalities, such as
USB-UART and USB-I2C.

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 8
Introduction
1.1 Kit Contents
The PSoC 4700S Inductive Sensing Evaluation Kit contains a PSoC 4700S Evaluation board,
Metal Target, USB Type-A to Type-C Cable and Quick Start Guide.
Figure 1-1. CY8CKIT-148 PSoC 4700S Inductive Sensing Evaluation Kit
Figure 1-2. Metal Target

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 9
Introduction
1.2 PSoC Creator
PSoC Creator™ is a state-of-the-art, easy-to-use integrated design environment (IDE). It introduces
revolutionary hardware and software co-design, powered by a library of pre-verified and pre-
characterized PSoC Components. With PSoC Creator, you can:
1. Drag and drop Components to build your hardware system design in the main design workspace.
2. Co-design your application firmware with the PSoC hardware.
3. Configure Components using configuration tools.
4. Explore the library of 100+ Components.
5. Review Component datasheets.
Figure 1-3. PSoC Creator Features
PSoC Creator also enables you to tap into an entire tool ecosystem with integrated compiler chains
and programmers for PSoC devices.
For more information, visit www.cypress.com/psoccreator. Visit the PSoC Creator Video Training
Page for video tutorials on learning and using PSoC Creator.

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 10
Introduction
1.2.1 PSoC Creator Code Examples
PSoC Creator includes a large number of code examples. These examples are available from the
PSoC Creator Start Page, as shown in Figure 1-4 or from the menu File > Code Example....
Code examples can speed up your design process by starting you off with a complete design,
instead of a blank page. The code examples also show how PSoC Creator Components can be
used for various applications. Code examples and documentation are included, as shown in
Figure 1-5 on page 11.
From the Find Code Example dialog shown in Figure 1-5 on page 11, you can:
■Filter for examples based on architecture or device family, that is, PSoC 3, PSoC 4, or PSoC 5LP,
project name, or keyword.
■Select from the list of examples offered based on the Filter Options.
■Review the code example’s description (on the Documentation tab).
■Review the code from the Sample Code tab. You can copy the code from this window and paste
to your project, which can help speed up code development.
■Create a new project (and a new workspace if needed) based on the selection. This can speed
up your design process by starting you off with a complete, basic design. You can then adapt that
design to your application.
Figure 1-4. Code Examples in PSoC Creator

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 11
Introduction
Figure 1-5. Code Example Projects with Sample Code
1.2.2 Kit Code Examples
You can access the installed kit code examples from the PSoC Creator Start Page. To access these
examples, expand Kits under Start; then, expand the specific kit to see the code examples. For a list
of code examples that you can use on this kit, see Code Examples chapter on page 28.
1.2.3 PSoC Creator Help
Launch PSoC Creator and navigate to the following items:
■Quick Start Guide: Choose Help > Documentation > Quick Start Guide. This guide gives you
the basics for developing PSoC Creator projects.
■Simple Component Code Examples: Choose File > Code Example. These examples
demonstrate how to configure and use PSoC Creator Components. To access examples related
to a specific Component, right-click the Component in the schematic or in the Component
Catalog. Select Find Code Example in the context menu that appears.
■System Reference Guide: Choose Help > System Reference Guides. This guide lists and
describes the system functions provided by PSoC Creator.

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 12
Introduction
1.2.4 Component Datasheets
Right-click a Component and select Open Datasheet (see Figure 1-6).
Figure 1-6. Opening Component Datasheet
1.3 Getting Started
This guide will help you get acquainted with the PSoC 4700S Inductive Sensing Evaluation Kit:
■The Software Installation chapter on page 16 describes the installation of the kit software. This
includes installation of the PSoC Creator IDE for development and debugging the applications,
and PSoC Programmer for programming hex files.
■The Kit Operation chapter on page 22 describes the major features of the PSoC 4700S Inductive
Sensing Evaluation Kit and functionalities such as programming, debugging, and the USB-UART
and USB-I2C bridges.
■The Code Examples chapter on page 28 describes multiple code examples that will help you
understand how to create your own PSoC 4700S projects.
■The Appendix chapter on page 35 describes the hardware content of the kit and the hardware
operation, Kit Schematics, and the bill of materials (BOM).

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 13
Introduction
1.4 Additional Learning Resources
Cypress provides a wealth of data at www.cypress.com to help you select the right PSoC device for
your design, and to help you quickly and effectively integrate the device into your design. For a com-
prehensive list of resources, see KBA86521, How to Design with PSoC 3, PSoC 4, and PSoC 5LP.
The following is an abbreviated list for PSoC 4:
■Overview: PSoC Portfolio and PSoC Roadmap.
■Product Selectors: PSoC 4 Product Selector. In addition, PSoC Creator includes a device
selection tool.
■Datasheets: Describe and provide electrical specifications for the PSoC 4000, PSoC 4100,
PSoC 4200, PSoC 4100M, PSoC 4200M, PSoC 4200L, PSoC 4100S Plus and PSoC 4700S
devices.
■CapSense Design Guide: Learn how to design capacitive touch-sensing applications with the
PSoC 4 and PSoC Analog Coprocessor family of devices.
■Inductive Sensing Design Guide: Learn how to design inductive sensing applications with the
PSoC 4 family of devices.
■Application Notes and Code Examples: Cover a broad range of topics, from basic to advanced.
Many of the application notes include code examples. Visit the PSoC 3/4/5 Code Examples
webpage for a list of all available PSoC Creator code examples. To access code examples from
within PSoC Creator, see PSoC Creator Code Examples on page 10.
■Technical Reference Manuals (TRM): Provide detailed descriptions of the architecture and
registers in each PSoC 4 device family.
■Development Kits:
❐CY8CKIT-041, CY8CKIT-046, CY8CKIT-044, CY8CKIT-042, and CY8CKIT-040 are easy-to-
use and inexpensive development platforms. These kits include connectors for Arduino™
compatible shields and Digilent Pmod Peripheral Modules.
❐CY8CKIT-043, CY8CKIT-049, CY8CKIT-145, CY8CKIT-146, and CY8CKIT-149 are very low-
cost prototyping platforms for sampling PSoC 4 devices.
❐CY8CKIT-001 is a common development platform for all PSoC family devices.
❐The MiniProg3 device provides an interface for flash programming and debug.
■Knowledge Base Articles (KBAs): Provide design and application tips from experts on using the
device.
■PSoC Creator Training: Visit www.cypress.com/go/creatorstart/creatortraining for a
comprehensive list of video training on PSoC Creator.
■Learning from Peers: Visit community.cypress.com/welcome to meet enthusiastic PSoC develop-
ers discussing the next-generation embedded systems on Cypress Developer Community
Forums.
1.5 Technical Support
For assistance, visit Cypress Support or contact customer support at [phone] Ext. 3 (in
the USA) or [phone] Ext. 3 (International).
You can also use the following support resources if you need quick assistance:
■Self-help (Technical Documents).
■Local Sales Office Locations.

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 14
Introduction
1.6 Document Conventions
Table 1-1. Document Conventions for Guides
Convention Usage
Courier New Displays file locations, user entered text, and source code:
C:\...cd\icc\
Italics Displays file names and reference documentation:
Read about the sourcefile.hex file in the PSoC Creator User Guide.
[Bracketed, Bold] Displays keyboard commands in procedures:
[Enter] or [Ctrl] [C]
File > Open Represents menu paths:
File > Open > New Project
Bold Displays commands, menu paths, and icon names in procedures:
Click the File icon and then click Open.
Times New Roman Displays an equation:
2 + 2 = 4
Text in gray boxes Describes Cautions or unique functionality of the product.

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 15
Introduction
1.7 Acronyms
Table 1-2. Acronyms Used in this Document
Acronym Description
ADC Analog-to-Digital Converter
BCP Bridge Control Panel
BLE Bluetooth Low Energy
BOM Bill of Materials
CE Code Example
CMOD Modulator Capacitor
CMP Comparator
CTANK Shield tank capacitor
DAC Digital to Analog Converter
DPDT Double-Pole, Double-Throw
ECO External Crystal Oscillator
ESD Electrostatic Discharge
GPIO General Purpose Input/Output
I2C Inter-Integrated Circuit
IDAC Current DAC
IDE Integrated Design Environment
KBA Knowledge Based Article
LED Light-Emitting Diode
PSoC Programmable Systems-on-Chip
SAR Successive Approximation Register
SCB Serial Communication Block
SRAM Static Random Access Memory
SWD Serial Wire Debug
TCPWM Timer, Counter, Pulse Width Modulator
UART Universal Asynchronous Receiver Transmitter
USB Universal Serial Bus
WCO Watch Crystal Oscillator

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 16
2. Software Installation
This chapter describes the steps to install the software tools and packages on a PC for using the
PSoC 4700S Inductive Sensing Evaluation Kit. This includes the IDE on which the projects will be
built and used for programming.
Note: Latest MagSense™ component needs to be installed manually before starting any code
example related to Inductive Sensing. Please refer Installing the MagSense Component on page 20
for more details.
2.1 Before You Begin
To install Cypress software, you will require administrator privileges. However, they are not required
to run the software that is already installed. Before you install the kit software, close any other
Cypress software that is currently running.
2.2 Install Software
Follow these steps to install the PSoC 4700S Inductive Sensing Evaluation kit software:
1. Download the PSoC 4700S Inductive Sensing Evaluation kit software from www.cypress.com/
CY8CKIT-148. The kit software is available in three formats for download.
a. CY8CKIT-148 Kit Only: This executable file installs only the kit contents, which include kit
code examples, hardware files, and user documents. This package can be used if all software
prerequisites (listed in step 5) are installed on your PC.
b. CY8CKIT-148 Kit Setup: This installation package contains the files related to the kit
including PSoC Creator and PSoC Programmer. However, it does not include the Windows
Installer or Microsoft .NET framework packages. If these packages are not on your PC, the
installer will direct you to download and install them from the Internet.
c. CY8CKIT-148 DVD ISO: This file is a complete package stored in a DVD-ROM image format
that you can use to create a DVD or extract using an ISO extraction program such as WinZip
or WinRAR. The file can also be mounted like a virtual CD/DVD using virtual drive programs
such as Virtual CloneDrive and MagicISO. This package includes all required software,
utilities, drivers, hardware files, and user documents.
2. If you have downloaded the ISO file, mount it on a virtual drive. Extract the ISO contents if you do
not have a virtual drive to mount. Double-click cyautorun.exe in the root directory of the extracted
content or mounted ISO if “Autorun from CD/DVD” is not enabled on the PC. The installation
window will appear automatically.
Note: If you are using the Kit Setup or Kit Only file, then go to step 4 for installation.

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 17
Software Installation
3. Click Install CY8CKIT-148 Kit to start the kit installation as shown in Figure 2-1.
Figure 2-1. Kit Installer Screen
4. Select the directory in which you want to install the PSoC 4700S Inductive Sensing Evaluation
Kit-related files. Click Next.
When you click Next, the PSoC 4700S Inductive Sensing Evaluation kit installer automatically
installs the required software, if it is not present on your PC. Following are the required software:
a. PSoC Creator 4.2 or later: This software is available for download separately at
www.cypress.com/psoccreator.
b. PSoC Programmer 3.27.1 or later: This is installed as part of PSoC Creator installation
(www.cypress.com/programmer).

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 18
Software Installation
5. Choose the Typical, Custom, or Complete installation type in the Product Installation Overview
window, as shown in Figure 2-2. Click Next.
Note: Typical installation is recommended, however you can choose according to your
requirement.
Figure 2-2. Product Installation Overview
6. Read the License agreement and select I accept the terms in the license agreement to
continue with the installation. Click Next. When the installation begins, a list of packages appears
on the installation page. A green check mark appears next to each package after successful
installation.
7. Enter your contact information or select the check box Continue Without Contact Information.
Click Finish to complete the PSoC 4700S Inductive Sensing Evaluation kit installation.
After the installation is complete, the kit contents are available at the following location:
<Install_Directory>\CY8CKIT-148 PSoC 4700S Inductive Sensing Evaluation
Kit
Default location:
Windows OS (64-bit):
C:\Program Files (x86)\Cypress\CY8CKIT-148 PSoC 4700S Inductive Sensing
Evaluation Kit
Windows OS (32-bit):
C:\Program Files\Cypress\CY8CKIT-148 PSoC 4700S Inductive Sensing
Evaluation Kit
Note: For Windows 7/8/8.1 and later users, the installed files and the folder are read-only. To use the
installer code examples, follow the steps outlined in the Code Examples chapter on page 28.

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 19
Software Installation
2.3 Installing PSoC 4700S Device in PSoC Creator
Below steps need to be followed in order to install PSoC 4700S device into PSoC Creator.
1. Run PSoC Creator 4.2.
2. Go to Tools > Find new devices in PSoC Creator. The Device Update Installer window will
pop-up.
Figure 2-3. Device Update Installer
3. Click on the Install Button.
4. Restart PSoC Creator. Note that this is an important step. The devices will only be available
after PSoC Creator is restarted.
The devices should now be available in the device selector when you create a new project.
From the dropdown list, select PSoC 4700S.
Figure 2-4. Device Selection

CY8CKIT-148 PSoC® 4700S Inductive Sensing Evaluation Kit Guide, Doc. #: 002-23165 Rev. *B 20
Software Installation
2.4 Installing the MagSense Component
To install the MagSense Component, Click Tools > Find new components. Figure 2-5 shows this
step.
Note: This step is mandatory for kit examples to work.
Figure 2-5. Tools Tab for finding New Components
Select the MagSense Component and click Install Checked Components. This will install the
MagSense Component in your software.
Note: You can skip this step if the MagSense Component is pre-installed in PSoC Creator.
Figure 2-6. Component Installation