Cyrus CS 20 User manual

CS 20 - THE PROFESSIONAL
MANUAL PROFILE
Thank you for purchasing this mobile phone, a Series of Cyrus. This mobile
phone is designed for shockproof, waterproof and dustproof. This instruc-
tion manual special used to guide you to understand the functions and
features of Series of Cyrus phone.
In addition to common call functions, CS 20 also provides you SMS, MMS,
MP3 player, Video player, Flashlight, EBook, etc. It will bring you more
convenience and pleasure for your work and life.
CS 20 provides including rechargeable batteries, charges and many kinds
of special accessories for your choosing to use. Unauthorized charger may
cause danger, and this would violate the recognition for this phone and
guarantee clauses. Such as described in this manual is incompatible with
your phone, please refer to the mobile phone.
The manufacturer has the nal interpretation of this manual. The manufacturer reserves the right
to modify technical regulations without prior notice.The company reserves the right to modify the
contents of this manual without prior notice. The manufacturer reserves the right to modify the
technical product specications without prior notice.
COPYRIGHT STATEMENT
» Cyrus has the nal interpretation of this manual.
» Cyrus reserves the right to modify the technical product specications
without prior notice.
» Cyrus reserves the right to modify the contents of this manual without
prior notice.
» Without the prior written permission of Cyrus, it is strictly prohibited to
copy, use, published any content in this manual in any form.
» In any case, Cyrus disclaims responsible for any loss of data or income
which caused by mobile phone reasons.
EN

CONTENTS
1. Basic Knowledge 4
1.1 Brief Introduction 4
1.2 General Considerations 4
1.3 Battery Precautions 5
1.4 Charge Mobile Phone 6
1.5 Charger Precautions 7
1.6 Cleaning and Maintenance 7
2. Introduction 8
2.1 Icons 8
2.2 Phone Layout 9
2.3 Boot Using 11
2.3.1 Insert and Remove SIM Card 11
2.3.2 Power On/Off 11
2.3.3 Unlock SIM Card 11
2.3.4 Unlock Screen 12
3. Basic Functions 12
3.1 Dial 12
3.2 Contacts 14
3.3 Messages 16
3.4 File Management 17
3.5 Camera 18
3.6 Images 19
3.7 Video Player 19
3.8 Music Player 20
3.9 FM Radio 21
3.10 Recorder 21
3.11 Clock 22
3.12 Calendar 23
3.13 Calculator 24
3.14 Notepad 24
3.15 Flashlight 25
3.16 E-mail 25
3.17 Browser 26
3.18 Searching 28
3.19 Download 29
3.20 Map 29
3.22 Backlog 30
3.23 Compass 31
3.24 Play Service 31
4. Settings 33
01 02

4.1 SIM Management 34
4.2 WIFI 34
4.3 Bluetooth 34
4.4 Mobile Network 35
4.5 Flight Mode 35
4.6 Scenes Mode 35
4.7 Display 36
4.8 Storage 36
4.9 Application 36
4.10 Security 37
4.11 Language and Input Method 37
4.12 Backup and Reset 37
4.13 Date and Time 37
4.14 Schedule Power On/Off 38
4.15 Auxiliary Function 38
4.16 Developer Options 39
4.17 About Phone 39
5. Common Problems & Solutions 39
1. BASIC KNOWLEDGE
1.1 BRIEF INTRODUCTION
Thank you for purchasing this digital mobile phone. This instruction
manual special used to guide you to understand the functions and
features.
In addition to common call functions and records, this phone also provi-
des you a variety of useful features and services. It will bring you more
convenience and pleasure for your work and life.
Some of the services and functions described in this manual depend on
the network and reservation service. Therefore, the menu items in the
phone may not be available, various menus and functions of the phone
may have different shortcut number
Our company reserves the right to modify the contents of this manual
without prior notice.
1.2 GENERAL CONSIDERATIONS
» Your phone can only use our designated batteries and chargers.
Using other products may cause battery leakage, overheating, explo-
sion and re.
» Do not put the battery, mobile phone and charger in a microwave
oven or high-pressure equipment, or may cause circuit damage and
re and other accidents
» Keep the phone away from children‘s reach to avoid they lest it as a
03 04

toy, causing personal injury.
» On airplanes, in hospitals and other places prohibit the use of mobile
phones, please turn off the phone.
» Do not use the mobile phone near the weak signal or high-precision
electronic equipments. Radio wave interference may cause incorrect
operation of the electronic equipment and other problems.
» Do not disassemble or modify the phone, otherwise it will cause
damage, leakage and circuit faults to the phone.
» Avoid mobile phone too close to magnetic objects such as magnetic
cards, mobile phone radiation wave may clear oppy disk, saving
card, credit card information stored on.
1.3 BATTERY PRECAUTIONS
» The use of mobile phone battery life is limited. In frequent charging
battery time gradually shortened. The multiple charging is invalid,
the battery life has been, you should replace the specied type of
new battery.
» Do not throw old batteries in the general household waste. There is
a clear local regulations for battery disposal, please follow the inst
ructions required to do.
» Do not throw the battery into re, otherwise it will cause the bat-
tery to ignite and explode. Installing batteries, do not apply pressure
to force, otherwise it will cause the battery to leak, overheat, explo-
sion and re.
» If the battery uid into the eye may cause blindness, then do not rub
your eyes, rinse with fresh water, and then immediately to the hospital.
» Do not disassemble or modify the battery, otherwise it will lead to
battery leakage, overheating, explosion and re.
» Do not use or leave the battery beside the re or heater hot place,
otherwise it will lead to battery leakage, overheating, explosion and
re
» Do not wet the battery, otherwise it will cause the battery to over
heat, smoke and corrosion. Do not use or leave the battery in direct
sunlight or near hot car, otherwise it will result in uid leakage and
overheating may degrade performance and shorten the service life.
» Do not more than 24 hour continue charge.
1.4 CHARGE MOBILE PHONE
» The joint is connected to the mobile phone charger, mobile phone
battery indicator on the screen will ash cycle; charging if it is
turned off, charging indicator will appear on the screen of the screen,
the battery charging. If the phone is still excessive use when battery
is low, probably over a period of time after charging indicates a sym-
bol will appear on the screen charge. When the on-screen battery in-
dicator shows full, and no longer ashing, indicating that charging
has been completed. After charging is complete, disconnect the AC
power outlet which connect the phone and charger.
» If you do not have the charger with the power and the phone is dis
connected, then after a fairly long period of time (about 5 to 8
hours), the battery consumption to a certain extent, the phone starts
charging again.We recommend that you do not do so, because it will
your battery performance and life of some impact.
05 06

1.5 CHARGER PRECAUTIONS
» Please use 220V AC. Using other voltage can cause leakage, re or
damage to the phone and charger. Prohibit short-circuit charger,
otherwise it will cause electric shock, smoke and damage to the
charger. Please do not use the charger in the case of the power cord
damage, otherwise it will lead to a re and electric shock.
» Please clean the dust on the power socket.
» Please do not put water container near the charger, to avoid over-
heating, leakage and malfunction caused by water spills. If the char-
ger come into contact with water or other liquids, immediately
unplug the power from the outlet down to prevent overheating, re,
electric shock and malfunction of the charger.
» Do not disassemble or modify the charger, otherwise it will lead to
personal injury, electric shock, re and damage to the charger.
» Please do not use the charger in the bathroom where high humidity,
otherwise it will cause electric shock, re and damage of the charger.
1.6 CLEANING AND MAINTENANCE
Mobile phone, battery and charger without waterproof performance,
do not use in the bathroom where high humidity, also avoid being wet.
With a soft, dry cloth to clean the phone, battery and charger. Do not
use alcohol, thinner or benzene solution to wipe the phone.
07 08
2.0 INTRODUCTION
2.1 ICONS
In the standby interface, may appear small ICONS, details are as follows
Time Display
Alarm clock has been set and activated
Show battery level
Vertical bars indicate the signal strength of the GSM network signal.
Indicates music playing
Receives new message
Missed Call
Meeting Mode
Flight Mode
Mute Mode
Activate USB
Access Restricted

09 10
2.2 PHONE LAYOUT
NR. KEY NOTE FUNCTION DESCRIPTION
1 Call Key Press this key to enter the call record
interface and dial out.
2 End Key Press this key to hang up in the
call interface; Other interface, press
the key to close screen, then bright
screen.
3 Menu Key In any mode, press this key to dis-
play the current menu options.
4 Return Key Return to the previous menu.
5 Home Key Non the standby state, press this key
can be directly back to the standby
interface. Long press to open the
recent task.
6 Power Key Long press this key to turn off/on.
Short press this key to lock the pho-
ne. Light the screen.
7 USB Jack Headset and USB Jack
8 Kamera Key Press this button to enter the camera
viewnder interface, then to take photos.
9 SOS Key Longpresstodialemergencynumber
and send a message for help.
10 Volume Key Ongoingcallandaudioplayinterface,
press the two side keys to adjust the
volume.
11 Camera Camera
12 Flashlight Cameraashlight,opentheashlight
program can be used as a ashlight
lighting.
13 Loudspeaker Loudspeaker
NR. KEY NOTE FUNCTION DESCRIPTION

11 12
2.3 BOOT USING
2.3.1 INSERT AND REMOVE SIM CARD
Turn off the phone, remove battery and other external power supply. Ac-
cording to the mobile phone label inserted SIM card. When you need to
take out the SIM card, please turn it off, take out the battery, then remove
SIM card from SIM card holder.
2.3.2 POWER ON/OFF
» To turn on the phone, please long press the power key on the phone
up side.
» Turn off the phone, long press the
power key. The following message
box pops up, select „Off”.
» Press the power key to switch pho-
ne in addition, you can also choose
to reboot the phone, select the
ight mode, mute mode, vibration
mode and standard mode.
2.3.3 UNLOCK SIM CARD
In order to prevent illegal use, SIM card using PIN1 (Personal
Identication Number) code encrypt protection. Elected to
use the function, every time you must enter PIN1 code when
the phone is switched on, so that you can unlock the SIM
card, and then send or receive the call.
Press the ON / OFF key to boot the phone; enter PIN1 code, press to
clear the error input, press to conrm
If you enter the wrong PIN1 code in several times, SIM card will be locked,
then please contact your SIM card network operator.
2.3.4 UNLOCK SCREEN
In order to prevent unauthorized use, you can set your phone screen lock.
Elected to use this function, every time you light up the screen, you must
draw your unlock pattern, so that you can unlock the phone, and then
send or receive calls
Users can clear the unlock pattern (see „Security Settings“), in this case,
the phone can not prevent unauthorized use
3. BASIC FUNCTIONS
3.1. DIAL
In standby interface to click into the dial-up interface, click the digital
on the screen to dial the number. If you need to change the phone number,
please click back to delete characters, then dial the number.Press the
Menu key to pop-up menu options, as shown, you can choose to send
SMS, added to the „Contacts“ or the Settings, etc.

You can also touch at the top of screen, enter to the call records
interface to dial out. Or click at at the top of the screen, enter the
contact interface to dial out. Click directly in the standby interface, can
also into the contact interface to dial out.
13 14
After the call is connected as shown
» Click to open the dial pad, according
to the call prompted to input the correspon-
ding number, such as 10086 when playing
prompts.
» Click to open the speaker, amplied
voice calls.
» Click to mute, do not send local voice.
» Click to keep current on the phone or
restore is held.
» Click to use the keyboard to enter a
contact or from call logs, contacts, select
the relevant contact, to make a new call.
» Click to end the current call
Interface as shown when a call comes in, tap and drag to ans-
wer the phone, drag to reject a call, drag to send SMS.
3.2 CONTACTS
You can directly open the „Contacts“ on the main screen, or open it in
„Dial“ app. Enter the contact interface as shown, click on a contact to
view the contact information stored, click on to call the contact,
click on to send SMS to the contact. Press the Menu key to modify,
share and delete the contact

In the contact interface, click on to quickly search contacts, click on
to add a new contact.You can choose to save the newly added con-
tacts to the phone or the SIM card and save the contact name, phone,
email, address and other information, as shown:
15 16
In the contact interface click menu button
will pop up the following menu options, you
can according to your need to delete, im-
port, export and share contacts and other
operations.
3.3 Messages
Click on the home screen, enter the mes
sage interface. Click to enter the written
message interface. In the „input names and
numbers“ area, input the number, or click on
the contact icon, select a number from your
contacts. In the „input the text message“
area to edit message content. Touch to
send a message after completion.
Click on the screen, can insert images,
video, audio and other les, SMS will be au-
tomatically converted into MMS.

3.4 FILE MANAGEMENT
You can view and management the les which be stored locally on the
phone or SD card.You can copy the les, paste, rename, delete, share and
other operations.
Click , you can select one or more les or folders to share, copy,
delete, cut, rename and other operations. You can also reordered folder by
name, size or date.
17 18
3.5 CAMERA
On the main screen, tap into the applica-
tion, and then click to enter the camera
viewnder screen.
Click to enter the camera setting mode,
you can according to your needs for camera
exposure, effects, shooting and other settings.
As shown:
Click to take a picture, click to convert video interface, as
shown: