Cytron Technologies ZOOM:BIT User manual

Dear Jr Maker,
Welcome aboard! We are Adam & Anna.And we’re so excited to
have you join our team of Makers.
In the following pages, we will walk you through the steps to build
ZOOM:BIT... and very soon you will have your own robot car. You’re
also going to learn to code and train ZOOM:BIT to perform some
tricks to WOW your friends. We’re sure you will have lots of fun
together.
If you encounter any problem along the way, you
can reach us on Telegram t.me/zoombit_support.
We’ll be there to guide you. So are you ready?
Let’s start!
Adam & Anna
Note from rero EDUteam @ Cytron

Cheryl Ng & SC Lim
Suhana Oazmi

CONTENT

What’s in the Box?
Quick Start Guidebook
Zoom Track
REKA:BIT (with or without micro:bit)
Maker Line Sensor Grove Cable x4
Ultrasonic Sensor LED Module x2

DC Motor & Wheel x2 Screwdriver Screw & Nut x4
Castor
Double-sided
Tape x5
Power & Data Cable
Servo Motor White Rivet x4 Black Rivet x8 Battery HolderAA Battery x4

1
2
3

4
5
6
The wires should
be facing inwards
and the notch
facing outwards.

0
1
7
Wire Connections:
* Clamp the exposed wire lead,
and not the insulator.

8
9
10

0
1
0
3
11
13
Wire Connections:
12

13
14

0
1
0
2
0
3
15
16
17
Wire Connections:

18
19
20
Wire Connections:

21
22

0
1
0
2
0
3
23
24
25
Wire Connections:

0
1
0
2
0
3
26
27
28
Wire Connections:

29
30
31