D-Link D DPH-50U DPH-50U User manual

2 D-Link DPH-50U Quick Install Guide
Package Contents
System Requirements
DPH-50U Skype™ USB
Phone Adapter
RJ-11 Phone Cable USB 2.0 Cable
CD-ROM with User Guide
* If Skype™ is not already installed on your computer, please insert the CD and click “Install
Skype” or visit http://www.skype.com to download latest version and follow the instructions
there to install Skype. Verify that Skype is working before installing the DPH-50U adapter.
An available Broadband connection
400MHz processor or higher
At least 128MB RAM
10MB Available Hard Drive Space
CD-ROM Drive
A valid Skype™ account*
If any of the above items are missing, please contact your reseller.

3D-Link DPH-50U Quick Install Guide
Front Panel
Rear Panel
Power
A solid blue light indicates that
the device is receiving power.
USB Connection
Connect the supplied USB cable into this slot and the
other into an available USB port on your computer.
VoIP
A solid light indicates a
VoIP call.
PSTN
A solid light indicates a
PSTN call.

4 D-Link DPH-50U Quick Install Guide
Installation
Do not connect the DPH-50U to your computer until
instructed to do so by the DPH-50U installation wizard
Insert the supplied CD into your PC CD-ROM drive. The installation should
start automatically. If you do not have Skype installed, click Install Skype
before installing the phone adapter driver.
Click Install Driver.
Click Yes to continue.
Check the I have read and
agree... box and then click
I Agree to continue.

5D-Link DPH-50U Quick Install Guide
The other end of the USB cable must be connected to a USB port on your
computer as shown or to a powered USB hub.
Click OK.
Connect the USB cable to the
DPH-50U adapter USB port.

6 D-Link DPH-50U Quick Install Guide
Select Install the
software automatically
(Recommended).
Click Next.
Click Finish.
Select Install the
software automatically
(Recommended).
Click Next.

7D-Link DPH-50U Quick Install Guide
Click Continue Anyway.
If you will see the following
screen, select Allow this
program to use Skype.
Click OK.
Click Finish.

8 D-Link DPH-50U Quick Install Guide
Your Installation Is Completed!
The DPH-50U Utility will automatically start and the utility icon
will appear in the bottom right-hand corner of the desktop
screen (systray). If this icon appears BLUE, then you have
successfully installed the DPH-50U.
Connect a standard telephone handset to the DPH-50U phone
jack using a RJ-11 telephone cable as shown below
You will see a new program group named D-Link USB Phone
Adapter. Click Start > All Programs > D-Link USB Phone
Adapter > DPH-50U Utility as shown below.

9D-Link DPH-50U Quick Install Guide
Connect a telephone cable between the DPH-50U line jack
and a wall jack as shown below. Note that this is only required
for making regular phone calls or for forwarding Skype calls
to your mobile (or other off-site) phone or for toll bypass
applications.
You final configuration should resemble the following.

10 D-Link DPH-50U Quick Install Guide
You can continue to use the telephone handset connected to the
DPH-50U Skype USB Phone Adapter to make and receive standard
telephone calls as you used without any change. To make a standard
phone call, just pick up the handset and dial as you normally would. Make
sure you hear a dial tone before you dial ## or the phone number. To
answer (receive) a standard phone call just pick up the handset when the
phone rings.
When you receive an incoming Skype™ call, the handset connected to the
DPH-50U will ring. To answer the call, just pick up the handset and speak
as you normally would. To end the call, simply hang up the handset as you
normally would.
If you have SkypeOut™, you can use the DPH-50U connected handset to
make SkypeOut™ calls by picking up the handset, pressing ## (only if the
DHP-50U is in PSTN mode), to indicate to the DPH-50U that this will be a
Skype call, dialing as per the SkypeOut™ recommended dialing sequence,
00 + country code + telephone number and pressing the asterisk (*) key. If
the DPH-50U is already in VoIP mode, pressing ## is not required.
Examples:
PSTN mode: ## 001 617 555 1212 *
VoIP mode: 001 617 555 1212 *
In order to make a call to a Skype™ contact, you will need to use the Skype™
program to assign a speed dial (as described in the user manual) to each
person you would like to call from the DPH-50U connected handset. Then
simply pick up the handset, press ## (if in PSTN mode), to indicate to the
DPH-50U that this is a Skype call, you will hear a new dial-tone, press the
speed dial number (e.g. 22) and then press the asterisk (*) key.
Making and Receiving Calls