D-Link DSL-2750U Product information sheet

Let’s
connect
you.
The Telkom Easy Guide to set up your
DSL Router (D-Link DSL-2750U).

First, unpack
your new router.
The quick reference guide
2 external antennae
Your D-Link DSL Router
DSL Splitter
DSL Filter
1 power supply cord
1
2
3
4
5
6
3
1 2
6 8 7 4 5
2 telephone cables
7
1 LAN cable
8

Let’s get
started.
Plug the red cable from
the power supply marked
OUT into the red socket
on the back of the router
marked DSL.
Plug the yellow LAN cable
into the yellow port on
the router and the other
end into the LAN port on
your computer.
Your telephone now plugs
into the green socket marked
Phone of the DSL splitter.
5
Remove the
antennae from
packaging and
connect it to the
router.
1
Plug the short end of
the DSL splitter into the
telephone jack on the wall
3
Take the grey cable and
plug the one end into red
socket marked DSL of
the DSL splitter and the
other end into the power
supply marked IN
4
7
6
Connect the 12vDC power
supply into your router and
into a power socket.
2

Ready
to go.
Switch your router on by pressing the
power button at the back of router.
The power light will first come on red and
then eventually turn green.
The DSL light will come on and flash,
until a connection is synced. Once
synced the light will remain solid.
The Wi-Fi light will be green if Wi-Fi is
enabled.
The LAN 1 light must be green if the LAN
cable is plugged in.
The Internet light will also be green if the
account is active.
All these lights can flash as
data is transferred.
4
1
2
5
6
!
3

Open your internet browser and go to:
http://10.0.0.2
Type in admin for both the username and password.
Click Login.
From the D-Link page that loads, click Status
and see whether the router is configured.
1 2 3
Configuring
your router.

Halfway-
mark.
If the router is not online and not configured
click Setup > Setup Wizard.
Change the password to your preferred
password. Click Next.
4 5
Click Next on the Time and Date page.
There is no need to change these.
6

Almost
there...
Select South Africa from the Country dropdown,
and Telkom as your Internet Service Provider. Enter
the username and password that were SMS’d to
you and click Next.
Enter your preferred name for your Wi-Fi network, and
your password. Click Next.
7 8
Check the Summary page and click Next.
9

Last few
steps.
If you were accessing the router via Wi-Fi up to this
point, you will need to reconnect to the router
using the new Wi-Fi name and password. It is
important to log out properly by clicking Logout,
and not just shutting down your browser window.
Activate your internet account by opening your web
browser (e.g. Internet Explorer, Google Chrome) and typing
www.telkom.co.za/verifyadsl into the address field.
Press Enter. Complete the fields with your telephone
number and order number and click on Submit.
10
Your router setup is now complete.
Test your internet connection by going to
www.youtube.com/telkom
11 12

No connection?
Don’t panic...
Plug your dongle into the
back of your router.
1

Open your web browser and go to http://10.0.0.2. Type in admin as your username and your new
password, if you changed it. Otherwise use the
default ‘admin’ password. Click Login.
Click 3G Internet Setup. Click Add.
1 2 3
Setting up
the Dongle.