D-Link DSL-2750U Product information sheet

Let’s
connect
you.
The Telkom Easy Guide to set up your
D-Link DSL 2750U Router.

First, unpack
your new router.
Your D-Link DSL Router
The quick reference guide
2 external antennae
1 power supply cord
1 LAN cable
2 telephone cables
1
2
3
4
5
6
1
2 3
4 5 6

Let’s get
started.
Connect the 12vDC
power supply into
your router and into
a power socket.
Plug one end of the grey
cable into the power
supply port marked IN
and the other end into the
telephone jack on the wall.
Plug the red cable from
power supply marked
OUT into the red socket
on the back of router
marked DSL.
Plug the yellow LAN cable into
the yellow port on the router
and the other end into the LAN
port on your computer.
23
1
4

Open your internet browser and
go to http://10.0.0.2 and click
Enter. Type in admin for both
the username and password. Click
Login.
From the D-Link page that loads,
click Status to see whether the
router is configured.
If your router is not online and not configured
click Setup > Setup Wizard
1 2 3
Setting up
the Router.

Almost
there...
Change the password to your preferred
password. Click Next on the Time and Date
page. There is no need to change these.
Select South Africa from the country
dropdown and Telkom as your Internet
Services Provider. Enter the username and
password that were SMS’d to you and click
Next.
4 5
Enter your preferred name for your
Wi-Fi network, and your password. Check
the Summary page and click Apply.
6

Last few
steps.
If you were accessing the router via Wi-Fi up to this
point, you will need to reconnect to the router using
the new Wi-Fi name and password. It is important
to log out properly by clicking Logout.
Activate your internet account by typing
www.telkom.co.za/verifyadsl to the address field of your
internet browser. Press Enter. Complete the fields with your
telephone number and order number and click on Submit.
7 8

No connection?
Don’t panic...
Plug your dongle into the
back of your router.
1

Open your web browser and go to http://10.0.0.2.
Type in admin as your username and your new
password, if you changed it. Otherwise use the
default admin password. Click 3G Internet Setup.
Click Add. Click Auto Settings.
1 2 3
Setting up
the Dongle.

Click Apply/Save. Click 3G Internet Setup from
the left navigation menu to
refresh the page, and if your SIM
card requires a pin, click the Pin
Manage button.
Enter the SIM’s Pin and click Submit.
4 5 6
Last few
steps.

Done.
You’re connected.
If you still need help
call us on 10210.