D-Link DWM-312W User manual

Quick Installation Guide
DWM-312W
4G LTE Wireless M2M Router with one module
for two SIM c rds

DWM-312W Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Router DWM-312W
•Power adapter DC 12V/1A
•“Quick Installation Guide” (brochure)
•Two detachab e LTE/3G antennas
•One detachab e Wi-Fi antenna
•Mounting kit (optiona ).
If any of the items are missing, p ease contact your rese er.
The “User Manual” and “Quick Installation Guide” documents are avai ab e
on D-Link website (see www.d ink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
2

DWM-312W Quick Installation Guide
Default Settings
Do ain na e of device dlinkrouter.local.
IP address of device 192.168.0.1
Userna e (login) admin
Password admin
Na e of wireless network (SSID) DWM-312W
Network key (PSK password)
see WPS PIN on the barcode
abe on the bottom pane of
the device
!
Router DWM-312W with defau t settings cannot connect to the
Internet. To get started, p ease set your own password for access to the
web-based interface and change the WLAN name (SSID); then, if
needed, configure other settings recommended by your ISP.
3

DWM-312W Quick Installation Guide
System Requirements and Equipment
•An Android or iPhone mobi e device (smartphone or tab et) or a computer
with any operating system that supports a web browser.
•A PC web browser to access the web-based interface of the router:
◦App e Safari 8 and ater
◦Goog e Chrome 48 and ater
◦Microsoft Internet Exp orer 10 and ater
◦Microsoft Edge 20.10240 and ater
◦Mozi a Firefox 44 and ater
◦Opera 35 and ater.
•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
•An 802.11b, g, or n Wi-Fi adapter to create a wire ess network.
•An active SIM card (when it is necessary to connect to the Internet via
mobi e operators' networks).1
1 Contact your operator to get information on the service coverage and fees.
4

DWM-312W Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Connect an Ethernet cab e between the LAN port ocated on the back
pane of the router and the Ethernet port of your PC.
2. To connect via the built-in LTE modem: insert a SIM card into the s ot
abe ed SIM A on the front pane of the router with the go d contacts
facing down. If necessary, insta a second SIM card into s ot abe ed
SIM B with the go d contacts facing up.
!
If you need to connect a SIM card or change it to another one when the
router is powered on, power off the router, insert or change the SIM
card, and power on the router.
3. Connect the power cord to the power connector port on the back pane of
the router, then p ug the power adapter into an e ectrica out et or power
strip.
Then make sure that your PC is configured to obtain an IP address
automatica y (as DHCP c ient).
5

DWM-312W Quick Installation Guide
Obtaining P Address Automatically
(OS Windows 7)
1. C ick the Start button and proceed to the Control Panel window.
2. Se ect the Network and Sharing Center section. (If the Contro Pane
has the category view (the Category va ue is se ected from the View by
drop-down ist in the top right corner of the window), choose the View
network status and tasks ine under the Network and Internet
section.)
3. In the menu ocated on the eft part of the window, se ect the Change
adapter settings ine.
4. In the opened window, right-c ick the re evant Local Area Connection
icon and se ect the Properties ine in the menu disp ayed.
5. In the Local Area Connection Properties window, on the
Networking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)
ine. C ick the Properties button.
6

DWM-312W Quick Installation Guide
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio buttons are
se ected. C ick the OK button.
7. C ick the OK button in the connection properties window.
7

DWM-312W Quick Installation Guide
Obtaining P Address Automatically
(OS Windows 10)
1. C ick the Start button and proceed to the Settings window.
2. Se ect the Network & Internet section.
3. In the Change your network settings section, se ect the Change
adapter options ine.
4. In the opened window, right-c ick the re evant Local Area Connection
icon and se ect the Properties ine in the menu disp ayed.
5. In the Local Area Connection Properties window, on the
Networking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)
ine. C ick the Properties button.
8

DWM-312W Quick Installation Guide
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio buttons are
se ected. C ick the OK button.
7. C ick the Close button in the connection properties window.
9

DWM-312W Quick Installation Guide
PC with Wi-Fi Adapter
1. To connect via the built-in LTE modem: insert a SIM card into the s ot
abe ed SIM A on the front pane of the router with the go d contacts
facing down. If necessary, insta a second SIM card into s ot abe ed
SIM B with the go d contacts facing up.
!
If you need to connect a SIM card or change it to another one when the
router is powered on, power off the router, insert or change the SIM
card, and power on the router.
2. Connect the power cord to the power connector port on the back pane of
the router, then p ug the power adapter into an e ectrica out et or power
strip.
3. Make sure that the Wi-Fi adapter of your PC is on. As a ru e, modern
notebooks with bui t-in wire ess NICs are equipped with a button or
switch that turns on/off the wire ess adapter (refer to your PC documents).
If your PC is equipped with a p uggab e wire ess NIC, insta the software
provided with your Wi-Fi adapter.
Then make sure that your Wi-Fi adapter is configured to obtain an IP address
automatica y (as DHCP c ient).
10

DWM-312W Quick Installation Guide
Obtaining P Address Automatically and
Connecting to Wireless Network (OS Windows 7)
1. C ick the Start button and proceed to the Control Panel window.
2. Se ect the Network and Sharing Center section. (If the Contro Pane
has the category view (the Category va ue is se ected from the View by
drop-down ist in the top right corner of the window), choose the View
network status and tasks ine under the Network and Internet
section.)
3. In the menu ocated on the eft part of the window, se ect the Change
adapter settings ine.
4. In the opened window, right-c ick the re evant Wireless Network
Connection icon. Make sure that your Wi-Fi adapter is on, then se ect
the Properties ine in the menu disp ayed.
5. In the Wireless Network Connection Properties window, on the
Networking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)
ine. C ick the Properties button.
11

DWM-312W Quick Installation Guide
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio buttons are
se ected. C ick the OK button.
7. C ick the OK button in the connection properties window.
8. To open the ist of avai ab e wire ess networks, se ect the icon of the
wire ess network connection and c ick the Connect To button or eft-
c ick the network icon in the notification area ocated on the right side of
the taskbar.
12

DWM-312W Quick Installation Guide
9. In the opened window, in the ist of avai ab e wire ess networks, se ect the
wire ess network DWM-312W and c ick the Connect button.
10. In the opened window, enter the network key (see WPS PIN on the
barcode abe on the bottom pane of the device) in the Security key
fie d and c ick the OK button.
11. Wait for about 20-30 seconds. After the connection is estab ished, the
network icon wi be disp ayed as the signa eve sca e.
!
If you perform initia configuration of the router via Wi-Fi connection,
note that immediate y after changing the wire ess defau t settings of the
router you wi need to reconfigure the wire ess connection using the
new y specified settings.
13

DWM-312W Quick Installation Guide
Obtaining P Address Automatically and
Connecting to Wireless Network (OS Windows 10)
1. C ick the Start button and proceed to the Settings window.
2. Se ect the Network & Internet section.
3. In the Change your network settings section, se ect the Change
adapter options ine.
4. In the opened window, right-c ick the re evant Wireless Network
Connection icon. Make sure that your Wi-Fi adapter is on, then se ect
the Properties ine in the menu disp ayed.
5. In the Wireless Network Connection Properties window, on the
Networking tab, se ect the Internet Protocol Version 4 (TCP/IPv4)
ine. C ick the Properties button.
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio buttons are
se ected. C ick the OK button.
7. C ick the Close button in the connection properties window.
14

DWM-312W Quick Installation Guide
8. To open the ist of avai ab e wire ess networks, se ect the icon of the
wire ess network connection and c ick the Connect To button or eft-
c ick the network icon in the notification area ocated on the right side of
the taskbar.
9. In the opened window, in the ist of avai ab e wire ess networks, se ect the
wire ess network DWM-312W and c ick the Connect button.
10. In the opened window, enter the network key (see WPS PIN on the
barcode abe on the bottom pane of the device) in the Security key
fie d and c ick the Next button.
11. A ow or forbid your PC to be discoverab e by other devices on this
network (Yes / No).
12. Wait for about 20-30 seconds. After the connection is estab ished, the
network icon wi be disp ayed as a dot with curved ines indicating the
signa eve .
15

DWM-312W Quick Installation Guide
!
If you perform initia configuration of the router via Wi-Fi connection,
note that immediate y after changing the wire ess defau t settings of the
router you wi need to reconfigure the wire ess connection using the
new y specified settings.
16

DWM-312W Quick Installation Guide
CONFIGURING ROUTER
Connecting to Web-based nterface
Start a web browser. In the address bar of the web browser, enter the domain
name of the router (by defau t, dlinkrouter.local) with a dot at the end
and press the Enter key. A so you can enter the IP address of the device (by
defau t, 192.168.0.1).
!
If the error “ The page cannot be displayed ” (or “ Unable to display the
page ”/“ Could not connect to remote server ”) occurs upon connecting to
the web-based interface of the router, make sure that you have proper y
connected the router to your computer.
If the device has not been configured previous y or the defau t settings have
been restored, after access to the web-based interface the Initia Configuration
Wizard opens (see the Initial Configuration Wi ard section, page 21).
17

DWM-312W Quick Installation Guide
If you configured the device previous y, after access to the web-based interface
the ogin page opens. Enter the username (admin) in the Userna e fie d
and the password you specified in the Password fie d, then c ick the LOGIN
button.
In order not to og out, move the Stay signed in switch to the right. After
c osing the web browser or rebooting the device, you need to enter the
username and the password again.
If you enter a wrong password severa times, the web-based interface wi be
b ocked for a whi e. P ease wait for one minute and reenter the password you
specified.
18

DWM-312W Quick Installation Guide
The Su ary page disp ays genera information on the router and its
software.
19

DWM-312W Quick Installation Guide
The Ho e page disp ays inks to the most frequent y used pages with device's
settings.
The web-based interface of the router is mu ti ingua . You can se ect the
needed anguage in the Syste / Configuration section of the menu.
Other settings of the router are avai ab e in the menu in the eft part of the
page. Go to the re evant section and se ect the needed page or run the wizard
in the Initial Configuration section.
20