D-Link DWR-922 User manual

4G LTE RouTER
DWR-922
QUICK
INSTALLATION
GUIDE

DWR-922
2
ENGLISH
CONTENTS OF PACKAGING
4G LTE ROUTER
DWR-922
If any of these items are missing from your packaging, contact your
reseller.
12 V 1.5 A POWER ADAPTER
CAT5 ETHERNET CABLE
• A broadband Internet connection
• A phone handset with RJ11 connector (optional)
• Computer with:
• Microsoft Windows® 8/7/Vista/XP, or Mac with OS X 10.6 or higher
• PC with 1.3 GHz or above and at least 128 MB RAM
• Internet Explorer 7, Firefox 12, Safari 4, or Chrome 20 or higher version with Java installed and
enabled
SYSTEM REQUIREMENTS
RJ11 PHONE CABLE

DWR-922 3
ENGLISH
PRODUCT SETUP
ZERo CoNFIGuRATIoN SETuP
Ensure that your DWR-922 4G LTE Router is powered off before performing the steps below.
Step 1:
Insert a standard USIM card into the SIM card slot on the back of the
router with the gold contacts facing downward.
Step 2:
Insert your Ethernet cable into the WAN port on the back of the
router.
Note: The 4G connection can also be used as a backup WAN. Once
a backup is congured, the router will automatically use 4G for the
Internet connection if the Ethernet WAN is not available.
Step 3:
Insert the Ethernet cable into a LAN port on the back panel of the
DWR-922 4G LTE Router, and an available Ethernet port on the
network adapter in the computer you will use to congure the unit.
Step 4:
(Optional) Connect a phone handset to the phone port (RJ11) on the
back panel of the DWR-922.
Log in to the conguration page to set up your handset for Voice over
IP (VoIP) calls (see below for information about how to congure the
DWR-922).
Note: Do not directly connect the DWR-922 to a telecommunication
network or a building’s telephone socket.
SIM card
Router
Router
Router
Router
PC
PC
Modem
Modem
Modem
Phone
Handset

DWR-922
4
ENGLISH
Step 6:
To congure the DWR-922 4G LTE Router:
Open a web browser window and enter 192.168.1.1 into the address
bar.
Enter admin for the username and admin for the password.
The home conguration page will appear. Please see the user
manual for details on how to set up the DWR-922.
Step 5:
Connect the power adapter to the power input on the back panel of
your DWR-922 4G LTE Router, and plug the other end of the power
adapter into a wall outlet or power strip.
The Status LED will light up to indicate that power has been supplied
to the router.
Router
PC
Modem
Phone
Handset
WELCOME TO THE D-LINK SETUP WIZARD

DWR-922 5
ENGLISH
1. HOW DO I CONFIGURE MY DWR-922 ROUTER OR CHECK MY WIRELESS NETWORK NAME (SSID)
AND WIRELESS ENCRYPTION KEY?
• Connect your PC to the router using an Ethernet cable.
• Open a web browser and enter the router's IP address: http://192.168.1.1
• Log into the router using the default username admin; the default password is admin.
• Once logged in, you can use the wizard to congure the router, or make changes manually.
Note: If you have changed the password and cannot remember it, you will need to reset
therouter to factory defaults.
2. HOW DO I RESET MY DWR-922 ROUTER TO FACTORY DEFAULT SETTINGS?
• If you cannot remember your router administrator password, you may use a paperclip to press
and hold the reset button on the front of the router for about 10 seconds.
Note: Resetting the router to factory default will erase the current conguration. To recongure
your router, log in as outlined in question 1, then run the Setup Wizard.
3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY WIRELESS
NETWORK NAME (SSID) OR WIRELESS ENCRYPTION KEY?
• Every PC that needs to connect to the router wirelessly will need use the correct Wireless
Network Name (SSID) and encryption key.
• Use the web-based user interface (as described in question 1 above) to check or choose your
wireless settings.
• Make sure you write down these settings so that you can enter them into each wirelessly-
connected PC. You will nd a dedicated area on the back of this document to note this important
information down for future use.
4. WHY AM I UNABLE TO ESTABLISH AN INTERNET CONNECTION?
• If connecting using a 4G mobile connection, make sure that you are within range of the mobile
service provider, and that the service has been correctly congured.
• If connecting using the WAN via ADSL/Cable service, make sure the modem has been enabled/
connected and is operational, and that the service is correctly congured.
TROUBLESHOOTING
SETuP AND CoNFIGuRATIoN PRoBLEMS

DWR-922
6
ENGLISH
TECHNICAL SuPPoRT
Australia:
Tel: [phone]
24/7 Technical Support
Web: http://www.dlink.com.au
E-mail: [email protected]
New Zealand:
Tel: [phone]
24/7 Technical Support
Web: http://www.dlink.co.nz
E-mail: [email protected]
You can nd software updates and user documentation on the D-Link website.
Tech Support for customers in

NoTES

TECHNICAL SUPPORT
WIRELESS NETWORK REMINDER
Wireless Network Name (SSID)
Wireless Network Password
Ver. 1.00(EN)_90X130 2014/08/20