D-Link DIR-506L User manual

Quick Installation Guide
DIR-506L
SharePort Go
Version 1.30 | April 22, 2013
Краткое руководство по установке
Guía de Instalación Rápida
Guia de Instalação Rápida
Petunjuk Pemasangan Cepat

1
DIR-506L
ENGLISH
Package Contents
LAN
ON
OFF
5V
LAN
ON
OFF
5V
+
-
Insert and Charge the Battery
USB Cable (for power and charging battery only)
Rechargeable Battery
SharePort Go
1. The battery must be installed for the device to operate. Slide off
the cover and insert the battery. Make sure the gold contacts align
with the gold terminals. Slide the cover back on.
2. Connect the USB cable to the DIR-506L and then connect to a USB
port on your computer.
Note: Charge the device using the USB cable for at least 4 hours or
until it is fully charged before usage.

DIR-506L
2
ENGLISH
SharePort Mobile - Sharing Made Easy
Stream movies, music, photos, and documents from a USB drive
plugged into the DIR-506L right to your iPhone, iPad, or Android
device, or to a PC; you don’t even need to be connected to the
Internet! SharePort Mobile transforms any USB drive into your own
personal shared file space that you can access with all your devices.
Supported File Formats for iOS and Android:
• Video: .mp4, .mov
• Music: .mp3, .wav
• Image: .bmp, .gif, .jpg, .png
• Document: .doc, .xls, .ppt, .pdf, .pages, .numbers, .key, .txt, .html, .ref
Download the SharePort Mobile App
Use a barcode scanner app such as Bakodo or RedLaser on your iOS
or Android device to scan the corresponding code for your device
below. If you do not have a scanning app, just search for SharePort
Mobile in the App Store or Google Play. Please make sure you have a
working Internet connection before downloading the app.

3
DIR-506L
ENGLISH
Plug In a USB Flash Drive and Turn On the
DIR-506L
Insert your USB drive into the USB port on the DIR-506L. Slide the
power switch to the ON position and wait until the power, USB, and
wireless LEDs turn green. Please allow 3-4 minutes for the boot-up
process to complete.
LAN
ON
OFF
5V
ON
OFF
5V
Connect to the DIR-506L Wirelessly
Use the following information to connect to your DIR-506L wirelessly:
• Default WiFi SSID: dlink_DIR-506L
• Default Password: (leave this blank)

DIR-506L
4
ENGLISH
Using The SharePort Mobile App
1. Open the SharePort Mobile app.
2. Make sure the Wireless icon at
the bottom of the screen is blue,
then you’re ready to use SharePort
Mobile!
If you set the device password for the DIR-506L, or if you want to use
a specific user account, tap on the gear icon in the top right corner of
the screen to open the settings page, then tap Edit to enter your User
Name and Password. By default, the User Name is admin, and the
Password should be left blank. When you’re finished, tap Done.
Using a PC with SharePort Mobile
You can use a PC to access files on a USB drive plugged into the DIR-506L
by opening a web browser and going to http://dlinkrouter.local:8181
By default, the User Name is admin, and the Password should be left
blank. When you’re finished, tap Done.
If you want to use a specific user account, enter your User Name and
Password for that account.

5
DIR-506L
ENGLISH
The DIR-506L can be used to help you share your Internet connection
in several different ways:
Router/AP Mode: Share a wired Internet connection
Whether you’re at home or at a hotel, the DIR-506L makes it easy to
share your Internet connection with all your devices. Just plug your
modem or Internet connection cable into the Ethernet port on the
DIR-506L to share your connection wirelessly.
3G/4G Mode: Share your 3G/4G connection on the go
On the road, you can plug in a D-Link 3G/4G USB adapter such as the
DWM-157 to share your mobile Internet connection. Stay online with
all your devices, or share Internet access with your travel companions.
Hotspot Mode: Share a hotspot connection with friends
At a café or at the airport, you can share access to a wireless hotspot
with all your friends and devices with the DIR-506L’s Wi-Fi Hotspot
Mode. The DIR-506L connects to the hotspot, then shares access
through a private wireless network you control.
Repeater Mode: Extend your existing wireless network
You can use your DIR-506L’s Repeater Mode to extend your wireless
signal to improve performance in hard-to-reach areas. The DIR-506L
makes it easy to take your existing wireless signal and repeat it in a
distant area of your home or office.
Getting Connected to the Internet

DIR-506L
6
ENGLISH
Connection Setup with QRS Mobile
If you wish to use Wireless Router Mode, you can configure your
DIR-506L with the handy QRS Mobile app for iOS and Android mobile
devices.
Use a barcode scanner app such as Bakodo or RedLaser on your iOS
or Android device to scan the corresponding code for your device
below. If you do not have a scanning app, just search for QRS Mobile
in the App Store or Google Play. Please make sure you have a working
Internet connection before downloading the app.
After downloading the app, connect to the DIR-506L wirelessly using
the following information:
• Default WiFi SSID: dlink_DIR-506L
• Default Password: (leave this blank)
You can now open the QRS Mobile app and follow the on-screen
instructions to configure your DIR-506L.

7
DIR-506L
ENGLISH
3. After logging in, the Setup Wizard will appear. Follow the on-
screen instructions to set up your DIR-506L.
If you have configured your DIR-506L before and the Setup Wizard
does not start, click the Internet Connection Setup Wizard
button.
Note: If you set your DIR-506L to use Repeater Mode, it is recommended that you use
a different Wi-Fi network name. If you use the same Wi-Fi network name, it will extend
your existing Wi-Fi network and will no longer be listed as a separate Wi-Fi network.
You can connect your devices to your existing Wi-Fi network as normal, and verify the
DIR-506L is working by observing increased signal strength.
Connection Setup Through a Browser
You can use a web browser on your PC or mobile device to configure
your DIR-506L for all the different connection modes, as well as the
advanced settings of your router.
2. Open a web browser, and go to http://dlinkrouter.local. By
default, the User Name is admin, and the Password should be left
blank.
1. Connect to the DIR-506L wirelessly using the following information:
• Default Wi-Fi SSID: dlink_DIR-506L
• Default Password: (leave this blank)

DIR-506L
8
ENGLISH
Technical Support
Australia:
Tel: [phone]
24/7 Technical Support
Web: http://www.dlink.com.au
E-mail: [email protected]
India:
Tel: [phone]
Toll Free: 1800-22-8998
Web: www.dlink.co.in
E-Mail: [email protected]
Singapore, Thailand, Indonesia,
Malaysia, Philippines, Vietnam:
Singapore: www.dlink.com.sg
Thailand: www.dlink.co.th
Indonesia: www.dlink.co.id
Malaysia: www.dlink.com.my
Philippines: www.dlink.com.ph
Vietnam: www.dlink.com.vn
Korea:
Tel: [phone]
Monday to Friday 9:00am to 6:00pm
Web: http://d-link.co.kr
E-mail: [email protected]
New Zealand:
Tel: [phone]
24/7 Technical Support
Web: http://www.dlink.co.nz
E-mail: [email protected]
South Africa and Sub Sahara
Region:
Tel: [phone]
08600 DLINK (for South Africa only)
Monday to Friday
8:30am to 9:00pm South Africa Time
Web: http://www.d-link.co.za
E-mail: [email protected]
Saudi Arabia (KSA):
Tel: [phone]
Fax: [phone]
Saturday to Wednesday 9.30AM to 6.30PM
Thursdays 9.30AM to 2.00 PM
E-mail: [email protected]
D-Link Middle East - Dubai, U.A.E.
Plot No. S31102,
Jebel Ali Free Zone South,
P.O.Box 18224, Dubai, U.A.E.
Tel: [phone]
Fax: [phone]
Technical Support: [phone]
General Inquiries: [email protected]om
Tech Support: [email protected]
Egypt
1, Makram Ebeid Street - City Lights Building
Nasrcity - Cairo, Egypt
Floor 6, oce C2
Tel: [phone]
Technical Support: [phone]
General Inquiries: [email protected]om
Tech Support: [email protected]
Kingdom of Saudi Arabia
Oce # 84,
Al Khaleej Building ( Mujamathu Al-Khaleej)
Opp. King Fahd Road, Olaya
Riyadh - Saudi Arabia
Tel: [phone]
Technical Support:
[phone] / [phone]
General Inquiries: [email protected]om
Tech Support: [email protected]