D-Link Ethernet Broadband Router DIR-100 User manual

Before You Begin
Make sure you have all the necessary information and equipment on hand before
beginning the installation. This device requires an existing broadband connection using a
cable modem, ADSL modem or similar broadband Internet device.
Check Your Package Contents
DIR-100 Triple Play
Installation CD-ROM (containing Manual)
Ethernet (CAT5 UTP) Cable
Power Adapter
Using a power supply with a different
voltage rating will damage and void the
warranty for this product.
This product can be set up
using a current web browser.
DIR-100
Triple Play Router

2
Internet Connection Setup Wizard
A. Connect the power adapter to the receptor at the back panel of the DIR-100 and
plug the other end of the power adapter to a wall outlet, power strip or other
suitable power source. The Power LED on the front panel will light green to indicate
the device is on.
B. Insert one end of the Ethernet cable into a NAT port (port 3 or 4) on the back panel
of the device and the other end of the cable to an Ethernet Adapter or available
Ethernet port on your computer. The Ethernet Link LED for the port will light green
indicating a connection.
C. Insert another Ethernet cable into the INTERNET port on the back panel and the
other end into the Ethernet port on a broadband modem such as a cable or ADSL
modem. Normally the broadband device is configured as a simple bridge type
connection.
NAT Ports
Use Ethernet cable
to connect to
INTERNET Port
Connect to
ADSL line
Power Input
Connect to
power adapter
The Power LED and
NAT port LED indicate
the device is on and
linked to the computer.

3
Configure the Router
To use your Web browser to access the web pages used to set up the Router, your computer
must be configured to “Obtain an IP address automatically,”that is, you must change the IP
network settings of your computer so that it is a DHCP Client. If you are using Windows XP
and do not know how to change your network settings, read the User Manual for instructions
on changing IP settings for computers running Windows operating systems.
The first page to appear lists basic information about the router. Click the Internet Connection Setup
Wizard directory link to go to the first page of the Setup Wizard.
Open your Web browser and type
“http://192.168.0.1” into the URL address
box. Then press the Enter or Return key.
In the page that opens, enter the User Name
admin and leave the Password field empty
(there is no default password).
Click the OK button.
Click Internet Connection
Setup Wizard to go to the
Setup Wizard launch menu.
admin

4
Configure the Router (continued)
Using the Setup Wizard
The first page of the set wizard appears. Enter information as required and click Next to go to the Internet
connection configuration page.
Enter a Host Name and Domain Name for the Router, or accept the default names. Choose the Time Zone
and configure and enable Daylight Saving dates where appropriate. Click the Next button to go the WAN
Settings configuration menu.
Configure your Internet connection using information provided by the ISP. You will need to know what Internet
connection type is used (Dynamic IP Address, Static IP Address or PPPoE) and the information required for
the type of connection used. You will also need to enter DNS settings. Follow the instructions provided by
your ISP to configure the Internet connection. For more detailed information please see the User Manual.
Click on the connection
type used for the
broadband Internet

5

6

7
  
         
.      
!  "  / ADSL   
! #-.
  
   
  
 Web-.
DIR-100


  DIR-100

 CD-ROM  !! !"
# Ethernet (#. 5 UTP)
$ "
%!  
&" &
"  ! 
! !  
  .

8
 
A.       "$  "  DIR-100,
   -  " . %  Power() 
  " " , "  .
B. &    Ethernet   NAT( 3  4)  "
,        Ethernet 
 Ethernet  . #  Ethernet 
" " , "   .
C.     Ethernet   INTERNET  " ,
    Ethernet !  / ADSL.'
, !     (simple bridge).
# Power  NAT
",  
 ,  
  .
 LAN
 
Ethernet-
' "
  
 
 INTERNET
 
 

9
* 
  !"   Web-",  * 
    IP- (“Obtain an IP address automatically”),
..  DHCP Client.    +% Windows XP  " "  
 ,   #  " IP-   
+% Windows  : ".
;  !   *    !".
'    Wizard      Setup Wizard.
; !   User
Name - admin    Password
 (   ).
    +K.
'  Internet
Connection Setup Wizard
   
" Setup Wizard.
< Web-"  
“http://192.168.0.1”    URL-.
< *  Enter  Return
admin

10
* 
%! 3 ! (Setup Wizard)
   =  (Setup Wizard).   * 
  Next      #-.
& Host Name  Domain Name !"    *  
. &   (Time Zone),  *   "   
  (Daylight Saving). '   Next      WAN Settings.
; #-   ,  . ;
    " #- ( IP-, 
IP-  PPPoE),  *    . >*    DNS.
; #-,   .    
, *,   : ".
& 
- 
!- 
#

.