D-Link DFE-528TX User manual

Check Your Package Contents
If any of the above items are missing, please contact your reseller.
The DFE-528TX supports drivers for the following operating systems:
Microsoft Windows 95/98/ME Macintosh 10.1.X
Microsoft Windows NT4.0 Netware Server
3.12/4.1X/5.00
Microsoft Windows 2000 Netware DOS ODI Client
Microsoft Windows 2003 DOS NDIS
Microsoft Windows XP Microsoft Network client 3.0
for DOS
Microsoft Windows Vista x86 Microsoft LAN Manager
Workstation/Server
Microsoft Windows Vista x64 SCO Unix 5.0
Linux 2.2 Packet Driver
DFE-528TX
10/100Mb Ethernet
PCI Adapter
• DFE-528TX 10/100Mb Ethernet PCI Adapter
• CD with Manual and Drivers

For Microsoft Windows
Installing the DFE-528TX Drivers
•Turn ON the computer.
•Insert the driver CD, which is included with the DFE-528TX, into the CD-
ROM drive.
The following window will appear.
Click on “Install Drivers”.
For Windows 2000, Windows XP, Windows 2003, Windows Vista x86 and Vista
x64 users, the following screen will appear.
Click OK
DO NOT insert the DGE-528Tinto the computer’s PCI
ltbf i tlli th di
DO NOT insert the DFE-528T
X
into the computer’s
PCI slot before installing the drivers.

For Windows 98SE and Windows ME users, this screen will be displayed.
Click Yes
Installing the DFE-528TX into the
computer’s PCI slot
•Turn off your computer and unplug the power cord.
•Remove the back cover of your computer. (Refer to your computer’s manual
if needed.)
•Locate an available PCI slot. PCI slots are usually white or cream colored.
•Remove the backplate (the small piece of metal that covers the opening for
the PCI card on the back cover that you just removed.)
•Insert the DFE-528TX carefully and firmly into the PCI slot.
•Secure the DFE-528TX with the screw from the backplate.
•Replace your computer’s cover.
Next, TURN OFF the computer and unplug
the power cord.
Caution: To avoid damage caused by static electricity, make sure to properly
ground yourself by first touching a metal part of your computer to discharge any
static electricity before working with the DFE-528TX Ethernet Adapter.

Finishing the Installation
TURN ON the computer.
For Windows 98SE and Windows ME users, the following screen will
appear.
Click Yes, to restart the computer.
Checking the Installation
Go to:
START>CONTROL PANEL>SYSTEM>HARDWARE>DEVICE MANAGER.
To check that the installation of the DFE-
528TX was successful, scroll down and
click on “Network Adapters.”
You have a successful installation when
“D-Link DFE-528TX” appears (with no
errors) as shown at left.

Technical Support
You can find software updates and user documentation on the
D-Link website.
Tech Support for customers within Australia:
D-Link Technical Support over the Telephone:
1300-766-868
Monday to Friday 8:00am to 8:00pm EST
Saturday 9:00am to 1:00pm EST
D-Link Technical Support over the Internet:
http://www.dlink.com.au
email:[e-mail]
Tech Support for customers within New
Zealand:
D-Link Technical Support over the Telephone:
0800-900-900
Monday to Friday 8:30am to 8:30pm
Saturday 9:00am to 5:00pm
D-Link Technical Support over the Internet:
http://www.dlink.co.nz
email:[email protected]