D-Link DCS-942L User manual

DCS-942L
Quick Install Guide
Enhanced Day/Night Wi-Fi Network Camera
Cloud Camera

If any of the above items are missing, please contact your reseller.
Minimum Requirements
DCS-942L Enhanced Day/Night Wi-Fi Network Cloud Camera
Wall Mount Kit
Ethernet Cable
Quick Install Guide
Package Contents
Computer with:
Web Browser
• 1.3GHz processor or above and at least 128MB RAM
• Windows® 8, 7, Vista®, or Mac OS® X 10.6 or higher
• Internet Explorer® 7, Firefox, Safari 6, or Chrome
• Installed and enabled Java and ActiveX® controls
• A router (D-Link Cloud Router is recommended)
• An Internet connection
• An e-mail account (required to create a mydlink™ account)
Network Device and Service
Power Adapter
• Wired 10/100 Fast Ethernet or Wireless 802.11g/n network
(Wireless N network recommended for optimum performance)
2

Product Overview
Camera Lens
Microphone
Camera Stand
WPS LED
Power Receptor Ethernet Port
Reset Button
WPS Button
Front
Back
Power &
Link LED
Light Sensor
IR LEDs
PIR Sensor
Audio Out
microSD card slot
3

The Zero Conguration Setup will only work with a registered
Cloud Router and an active mydlink account. Your Cloud Router will
automatically assign your network settings (both wired and wireless) to
your camera, and add it to your mydlink account. If you do not have a
D-Link Cloud Router, skip to the Easy Setup section on the next page.
Zero Conguration Setup
1
2
From any PC, open a web browser,
go to http://www.mydlink.com
and log into your account. Once
mydlink detects your camera,
a notice will appear that there
is a new device detected. Click
on your camera from the New
Devices list and then click Yes to
add your camera.
3
DCS-942L
Your setup is complete!
Attach the power supply to the
power receptor located on the
back of the DCS-942L and connect
it to a wall outlet or power strip.
Power is conrmed when the
Power LED is lit.
If using an Ethernet connection:
Connect the included Ethernet
cable to the Ethernet port located
on the back of the DCS-942L and
connect it to your router.
If using a wireless connection:
Press and hold the WPS button
on the back of the camera for ve
seconds. The blue WPS status
LED will start to blink. Then, press
the WPS button on your Cloud
Router within two minutes.
4

Easy Setup (All Other Routers)
Download the Setup Wizard from http://www.mydlink.com/support.
If you do not have a D-Link Cloud Router, you can use any Windows or Mac
computer to go through the Setup Wizard, which will guide you through the
installation process.
Windows Users - When you select the DCS-942L, you will see a list of setup wizards.
Download the Windows Setup (exe) le.
Mac Users - Download the Mac OS Setup Wizard. Open the SetupWizard le and
launch the application.
Within 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step
through the installation process, from connecting your hardware to conguring your
camera and registering it with your mydlink account.
5

Start mydlink
Open a web browser and go to http://www.mydlink.com.
Registering your DCS-942L camera with mydlink will allow you to use
mydlink Cloud Services, including free online access to the mydlink portal
website. You will be able to remotely access your camera from the www.
mydlink.com website.
1
What is mydlink?
Cloud Router
mydlink cloud
services
Cloud Camera
iPod
Smartphone
Tablet
Laptop
Laptop
Desktop
mydlink app
modem
1
With a mydlink-enabled camera, you can stay connected to everything
you love from anywhere, anytime. mydlink provides users with a
quick and easy way to view and to manage multiple cameras over
the Internet.
You can add the DCS-942L to your mydlink account during the Setup
Wizard. After you download one of the mydlink apps (refer to page 8),
you will be able access the camera with your smartphone or tablet.
6

2Sign into your mydlink account. (If you don’t have an account, click on Not
Registered? and follow the instructions.)
3Select your DCS-942L from the device list, and your camera’s Live Video
will appear.
• Windows does not have Java installed by default. Download it from
http://www.java.com.
• In Mac OS X 10.7.x, Java applets are disabled by default. Click the
Finder > Applications > Utilities > Java Preferences and check the
Enable applet plug-in and Web Start applications option.
• The ActiveX® controls in IE will install automatically if needed. We
suggest that you make sure that you have enabled the related
options in Tools > Internet Options > Security > Custom Level.
7

mydlink Lite App (Free)
Search for“mydlink lite”to download and install the app on your smartphone
or tablet when connected to the Internet. You can also nd the app by
scanning the QR code below with a QR code scan app.
mydlink+ App (Paid - Tablet Only)
Search for the word “mydlink+”to download and install the app on your
tablet when connected to the Internet. You can also nd the app by scanning
the QR code below with a QR code scan app.
mydlink Requirements: for mydlink and mydlink app requirements refer to: www.mydlink.com
mydlink Requirements: for mydlink and mydlink app requirements refer to: www.mydlink.com
mydlink Apps
8

Mount the Camera
Please refer to the steps below to assist you with mounting the camera.
We suggest that you congure the camera before mounting.
Do not overtighten the screws as this may crack the base.
2. Use a athead screwdriver to remove the
base cover from the mounting base. Place the
mounting base where you want to position
the camera and use a pencil to mark the
holes.
1. The camera must be separated from the base
to expose the holes in the mounting base.
Unscrew the camera head from the mounting
base by turning it counterclockwise.
3. Depending on the material of the wall or
ceiling, use a 6mm drill bit to drill two holes
where you marked. If the wall is made out
of concrete, after drilling the holes, insert the
plastic anchors to support the screws.
4. Position the mounting base over the holes that
you drilled, and align the mounting base holes
with the holes in the wall. Use the supplied
screws to attach the mounting base to the
surface of the wall.
5. Place the base cover on the base. Make sure to
align the base cover notch with the mounting
base for future removal.
6. Reattach the camera head onto the mounting
base. Adjust the angle of the camera as desired,
then tighten the collar on the camera stem to
lock it in place.
1
2
3
4
5
6
9

1. What is a mydlink No.? What is it used for?
Each camera has a unique eight-digit mydlink No. which will be shown on
the label on the back of your camera. This eight-digit number identies
your device, and is required to add your device to your mydlink account.
2. What can I do if my DCS-942L is not working correctly?
• Try using the Setup Wizard.
• To make sure your hardware is installed correctly, make sure that:
- the power LED is lit solid green
- your Internet connection is working
- your router’s LAN & WAN connections are okay
- your router supports UPnP®
- your camera is on the same network as your PC
- both your PC and camera have a working Internet connection
• If your camera is still not working, check your router and make sure it
has the latest rmware.
3. What can I do if I forget my password?
FAQs
If you forget your password, you must reset the
camera. Unfortunately, this process will change
your settings back to factory default. To reset the
camera, locate the reset button on the back of
the camera. With the camera powered on, use an
unfolded paper clip to hold the button down for
10 seconds.
Reset
Button
4. Why is there a white haze when viewing in night vision mode?
When viewing in night vision mode, the IR lights on the camera may be
reecting o a nearby surface. Try repositioning the camera in order to
avoid glare from IR LEDs.
10

Notes
11

Notes
12

Notes
13

Notes
14

Notes
15

Technical Support
This guide is only for the rst time conguration. Please refer to the user manual to
learn more or visit http://www.mydlink.com for more information. Also feel free to
contact D-Link Technical Support through our website.
Version 5.0(NA)_90x130
June 13, 2014
6DCS942LQ.05G
©2014 D-Link. All Rights Reserved. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link
Corporation or its subsidiaries. All other third party marks mentioned herein may be trademarks of their respective owners.
Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specications. Actual data throughput
will vary. Network conditions and environmental factors, including volume of network trac, building materials and
construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect
wireless signal range. Product specications, size and shape are subject to change without notice, and actual product
appearance may dier from that depicted on the packaging. This publication may not be reproduced, in whole or in part,
without prior express written permission from D-Link Systems, Inc.
http://support.dlink.com
http://support.dlink.ca
USA
Canada
Guide d’installation rapide
Caméra réseau Wi-Fi jour/nuit améliorée
Caméra infonuagique

DCS-942L
Guide d’installation rapide
Caméra réseau Wi-Fi jour/nuit améliorée
Caméra infonuagique

Contactez votre revendeur s'il manque l'un des éléments ci-dessus.
Exigences minimales
Caméra réseau Wi-Fi infonuagique jour/nuit améliorée
DCS-942L
Kit de montage mural
Câble Ethernet
Guide d’installation rapide
Contenu de la boîte
Ordinateur avec:
Navigateur Web
• Processeur de 1,3GHz ou plus et au moins 128Mo de RAM
• Windows® 8, 7, Vista® ou Mac OS® X 10.6 ou supérieur
• Internet Explorer® 7, Firefox, Safari 6, ou Chrome
• Contrôles Activex® et Java installés et activés
• Un routeur (un routeur infonuagique de D-Link est recommandé)
• Une connexion Internet
• Un compte de messagerie (requis pour créer un compte mydlink™)
Périphérique réseau et service
Adaptateur secteur
Bouton de
réinitialisation
Voyant
d'alimentation
et de connexion
• Réseau câblé Ethernet rapide 10/100 ou sans l 802.11g/n
(Réseau sans l N recommandé pour des performances optimales)
2

Présentation du produit
Objectif de la caméra
Microphone
Support de la caméra
Voyant WPS
Fiche d'alimentation Port Ethernet
Bouton de
réinitialisation
Bouton WPS
Avant
Retour
Voyant
d'alimentation
et de connexion
Capteur de lumière
TémoinsIR
Capteur infrarouge
PIR
Sortie audio
Port de carte MicroSD
3

Paramétrage à l'aide de Zero Conguration
Conguration facile (tous les autres routeurs)
1
2
De n'importe quel PC, ouvrez
un navigateur web, rendez-vous
sur http://www.mydlink.com et
connectez-vous à votre compte.
Une fois que mydlink détecte
votre caméra, un avis s'ache
pour indiquer qu'un nouveau
périphérique a été détecté.
Cliquez sur votre caméra dans le
liste des New Devices (Nouveaux
périphériques), puis cliquez sur Yes
(Oui) pour ajouter votre caméra.
3
DCS-942L
Conguration terminée!
Reliez une extrémité de
l'alimentation au récepteur
d'alimentation à l'arrière de
la DCS-942L et l'autre, dans
une prise murale ou un bloc
multiprise. L'alimentation est
conrmée lorsque le voyant
d'alimentation s'allume.
Si vous utilisez une connexion
Ethernet: Branchez une extrémité
du câble Ethernet fourni au port
Ethernet situé à l'arrière de la DCS-
942L et l'autre, à votre routeur.
Si vous utilisez une connexion
sans : Appuyez pendant cinq
secondes sur le bouton WPS situé
à l'arrière de la caméra. Le voyant
d'état WPS bleu commencera à
clignoter. Appuyez ensuite sur
le bouton WPS de votre routeur
infonuagique dans les deux
minutes.
L'installation à l'aide de Zero Conguration fonctionnera uniquement avec
un routeur infonuagique enregistré et un compte mydlink actif.Votre routeur
infonuagique attribue automatiquement vos paramètres réseau (câblé et sans
l) à votre caméra et l'ajoute à votre compte mydlink. Si vous ne disposez pas
d'un routeur infonuagique de D-Link, passez à la section Conguration facile
sur la page suivante.
4