D-Link DCS-F4605EK User manual

Getting Started Guide for
D-Link Vigilance Network Camera
DCS-F4605EK
5MP Day & Night Outdoor Vandal-Proof
Dome PoE Network Camera
PRODUCT QUICK INSTALLATION GUIDE

STEP 1.
Connect the camera to a PoE switch.
If you do not have a PoE switch, power the
camera with a 12V DC power supply (not
included).
If you have a Network Video Recorder (NVR),
connect the camera to your NVR and follow
the instructions for your NVR.
QUICK INSTALLATION GUIDE | DCS-F4605EK 2

STEP 2.
Log into your camera by typing its IP address
into a Web browser.
The camera’s default setting is to obtain
IP address automatically (DHCP). If DHCP
server is not present the camera will use
192.168.0.120 address.
You can nd out what IP address was assigned
to the camera by checking your router’s DHCP
status or by running the Tool for Cameras and
NVR software downloadable from
https:// www.dlink.com.au/Camera-Search
QUICK INSTALLATION GUIDE | DCS-F4605EK 3

STEP 3.
The default username is “admin”and password
is “admin”.
It is recommended to change the default
password to a strong password that includes
lower and upper case letters, numbers and
special symbols.
QUICK INSTALLATION GUIDE | DCS-F4605EK 4
Enter username:
Enter password:

STEP 4. (Optional)
Add your camera to D-Link CCTV app.
Add your camera to DCMS+ Surveillance
Software (free download):
https://www.dlink.com.au/DCMS
Add your camera to your NVR.
Please follow your NVR’s setup guide.
QUICK INSTALLATION GUIDE | DCS-F4605EK 5

Factory Reset
If you forgot the camera password or need to
revert the camera to its factory settings:
Open the camera’s cover and press the
Reset Button for 5 seconds:
QUICK INSTALLATION GUIDE | DCS-F4605EK 6
Reset Button