D-Link DCS-5222L User manual

User Manual
Version 2.0 | 01/23/2014
DCS-5222L
HDPan&TiltDay/NightNetworkCamera

iD-Link DCS-5222L User Manual
Manual Overview
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes. Information in this document may become obsolete as our services and
websites develop and change. Please refer to the www.mydlink.com website for the most current information.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of
their respective companies.
Copyright © 2014 by D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Corporation.
Revision Date Description
1.0 December 23, 2011 DCS-5222L Revision A1 with rmware version 1.00
1.1 September 24, 2012 Updated for rmware version 1.10
2.0 January 23, 2014 Updated for revision B1 with rmware version 2.00
Manual Overview

iiD-Link DCS-5222L User Manual
Manual Overview
Safety Instructions
Use the following safety guidelines to ensure your own personal safety and to help protect your product from
potential damage.
• If any of the following conditions occur, unplug the product from the electrical outlet and replace the part or
contact the place of purchase:
• The power cable, extension cable, or plug is damaged.
• An object has fallen into the product.
• The product has been exposed to water.
• The product has been dropped or damaged.
• The product does not operate correctly when you follow the operating instructions.
• Do not spill food or liquids on product, and never operate the product in a wet environment. If the product
gets wet, see the appropriate section in your troubleshooting guide.
• Operate the product only from the type of external power source indicated on the electrical ratings label. If you
are not sure of the type of power source required, consult your local power company.
• Use only the power adapter with the product. Using another adapter, not recommended by the manufacturer,
may damage the product and invalidate the warranty.
• To help prevent an electric shock, plug the product into properly grounded electrical outlets.
• Observe power strip ratings. Make sure that the total ampere rating of all products plugged into the power
strip does not exceed 80 percent of the ampere ratings limit for the power strip.
• To help protect your product from sudden, transient increases and decreases in electrical power, use a surge
suppressor, line conditioner, or uninterruptible power supply (UPS).
• Position product cables and power cables carefully; route cables so that they cannot be stepped on or tripped
over. Be sure that nothing rests on any cables. Do not modify power cables or plugs. Consult a licensed electrician
or your power company for site modications. Always follow your local/national wiring rules.

iiiD-Link DCS-5222L User Manual
Manual Overview
• The product is designed for indoor use only, and must always be positioned where it is not exposed to direct
sunlight or strong halogen light. Exposure to direct sunlight or halogen light may cause permanent damage to
the image sensor in the product.
Warnings
• STRANGULATION HAZARD! – Keep cords out of the reach of children. Keep and secure all cords a minimum of
3 feet away from a crib or other child sleeping area.
• This product contains small parts that may cause choking. Keep out of reach of children.
• This product is not a toy. Do not allow children to play with it.
• The product is designed for Indoor Use Only!
• The product should not be used in a location where it could become wet!
• Ensure the product is xed securely otherwise it may fall and cause injury!
• This product is NOT intended to replace proper supervision of children. You must check your child’s activity
regularly, as this product will not alert parents to activity of children.
• Do not use extension cords. Only use the power adapter provided.
• Do not use this product near a heat source.
THIS DEVICE REQUIRES THIRD-PARTY SERVICES AND PRODUCTS TO ACHIEVE FULL FUNCTIONALITY,
INCLUDING BUT NOT LIMITED TO, BROADBAND INTERNET SUBSCRIPTION SERVICES AND PRODUCTS;
MOBILE INTERNET SUBSCRIPTION SERVICES, COVERAGE AND PRODUCTS; CAMERA MANAGEMENT
SOFTWARE, AND; A NETWORK CONNECTION. D-LINK HAS NO CONTROL OVER SUCH SERVICES AND
PRODUCTS AND EXPRESSLY DISCLAIMS ANY AND ALL LIABILITY FOR THE FAILURE OF THE DEVICE OR ANY
FEATURE THEREOF RESULTING FROM THE FAILURE OF ANY THIRD-PARTY SERVICE OR PRODUCT.

ivD-Link DCS-5222L User Manual
Table of Contents
Manual Overview................................................................ i
Manual Revisions........................................................................... i
Trademarks ...................................................................................... i
Safety Instructions ....................................................................... ii
Warnings................................................................................. iii
Product Overview.............................................................. 1
Package Contents......................................................................... 1
System Requirements................................................................. 2
Introduction ................................................................................... 3
Features............................................................................................ 4
Hardware Overview..................................................................... 5
Front .......................................................................................... 5
Back............................................................................................ 6
Left and Right Side............................................................... 7
Wireless Installation Considerations...................................... 8
Installation ......................................................................... 9
Camera Installation Wizard ....................................................... 9
mydlink.............................................................................12
Camera Status..............................................................................13
Live Video ......................................................................................14
SD Card...........................................................................................15
Settings ..........................................................................................16
Conguration...................................................................17
Conguration Utility..................................................................17
Live Video ......................................................................................18
Setup...............................................................................................21
Setup Wizard ........................................................................21
Internet Connection Setup Wizard..........................22
Motion Detection Setup Wizard...............................26
Network..................................................................................28
Wireless ..................................................................................31
Dynamic DNS .......................................................................32
Image Setup .........................................................................33
Audio and Video..................................................................35
PTZ ...........................................................................................37
Motion Detection ...............................................................39
Sound Detection.................................................................40
Time and Date......................................................................41
Event Setup...........................................................................42
Add Server........................................................................44
Add Media........................................................................45
Add Event .........................................................................47
Add Recording................................................................49
Advanced ......................................................................................51
Digital Input/Output .........................................................51
ICR and IR...............................................................................52
Table of Contents

vD-Link DCS-5222L User Manual
Table of Contents
HTTPS......................................................................................53
Access List..............................................................................54
Maintenance ................................................................................55
Admin .....................................................................................55
System ....................................................................................57
Firmware Upgrade..............................................................58
Status ..............................................................................................59
Device Info ............................................................................59
Log ...........................................................................................60
Help .................................................................................................61
Conguring the DCS-5222L with a Router................62
Troubleshooting ..............................................................68
Networking Basics...........................................................71
Check your IP address...............................................................71
Statically Assign an IP Address ..............................................72
DI/DO Specications .......................................................73
Technical Specications..................................................74
Contacting Technical Support ........................................76
Warranty...........................................................................77
Registration .....................................................................83

1D-Link DCS-5222L User Manual
Section 1 - Product Overview
Package Contents
Note: Using a power supply with a dierent voltage rating than the one included with the DCS-5222L will cause damage and void the warranty for this
product. If any of the above items are missing from your package, please contact your retailer.
Product Overview
• DCS-5222L HD Pan & Tilt Day/Night Network Camera
• CAT5 Ethernet Cable
• Power Adapter
• Audio In/Out Cable
• Mounting Kit
• Quick Install Guide

2D-Link DCS-5222L User Manual
Section 1 - Product Overview
System Requirements
Network Requirements • 10/100 Ethernet network or an 802.11n/g/b wireless network
CD Setup Wizard Requirements
• An Internet connection
• A router connected to your broadband modem
Computer with the following:
• A PC with a wired connection to your router
• Windows® 8, 7, Vista®, XP (SP3), or Mac OS®X (10.5 or above)
Web-based Conguration Utility
Requirements
Browser Requirements:
• Internet Explorer 7 or higher
• Firefox 12 or higher
• Safari 4 or higher
• Chrome 20 or higher
Windows® Users: Make sure you have the latest version of Java installed.
Visit www.java.com to download the latest version.
mydlink Website Requirements
• Broadband Internet connection
• Computer with:
• Internet Explorer 7 or higher (ActiveX)
• Firefox 12 or higher
• Safari 4 or higher
• Chrome 20 or higher

3D-Link DCS-5222L User Manual
Section 1 - Product Overview
Congratulations on your purchase of the DCS-5222L. The DCS-5222L is a versatile solution for your small oce or home. The
DCS-5222L is a complete system with a built-in CPU and web server that transmits high quality video images for security and
surveillance. It can be accessed remotely, and controlled from any PC/Notebook over your local network or across the Internet
via a web browser. The DCS-5222L features 802.11n wireless connectivity, allowing the camera to be placed anywhere within
range of your wireless network. The DCS-5222L comes with remote monitoring and motion detection features for a complete
and cost-eective home security solution.
Introduction

4D-Link DCS-5222L User Manual
Section 1 - Product Overview
Simple to Use
The DCS-5222L is a stand-alone system with a built-in CPU, requiring no special hardware or software such as PC frame grabber cards. The DCS-5222L
supports both ActiveX mode for Internet Explorer and Java mode for other browsers such as Firefox, Chrome, and Safari.
Supports a Variety of Platforms
The DCS-5222L supports TCP/IP networking, HTTP, and other Internet related protocols. It can also be integrated easily into other Internet/Intranet
applications because of its standards-based features.
Web Conguration
Using a standardWeb browser, administrators can congure and manage the Network Camera directly from its ownWeb page via Intranet or Internet.
Broad Range of Applications
With today’s high-speed Internet services, the DCS-5222L Network Camera can provide an ideal solution for live video over the Internet and for
remote monitoring. The DCS-5222L allow remote access from a Web browser for live image viewing and management of the network cameras
anytime, from anywhere in the world.The network cameras have a wide range of applications, including industrial and public monitoring of homes,
oces, banks, hospitals, child-care centers and amusement parks.
802.11n Wireless or Ethernet/Fast Ethernet Support
The DCS-5222L oers wireless 802.11n and Ethernet/Fast Ethernet connectivity, making the DCS-5222L easy to integrate into your existing
network environment. The DCS-5222L works with a 10Mbps Ethernet based network or 100Mbps Fast Ethernet based network for traditional wired
environments, and works with 802.11n routers or access points for added exibility. The Site Survey feature also allows you to view and connect to
any available wireless networks.
Remote Monitoring Utility
The D-ViewCam application adds enhanced features and functionality for the Network Camera and allows administrators to congure and access
the Network Camera from a remote site via Intranet or Internet. Other features include image monitoring, recording images to a hard drive, viewing
up to 32 cameras on one screen, and taking snapshots. Note that D-ViewCam works on Windows® computers only.
IR LED for day and night functionality
The built-in infrared LEDs enables night time viewing of up to 26 feet (8 meters).
Features

5D-Link DCS-5222L User Manual
Section 1 - Product Overview
Hardware Overview
Front
1 IR LEDs for night vision Used to illuminate the camera’s eld of view at night.
2 Focus Adjustment Ring Enables manual adjustment of the cameras focal length.
3 Passive Infrared Sensor Passive Infrared (PIR) sensor for motion detection.
4 Power/Link LED The LED will be solid red while the camera boots, performs a self test, and searches for a network connection. The LED
will switch to solid green when a proper connection has been achieved. The LED will blink green during data transfer.
5 Light Sensor Detects light levels and adjusts IR-LEDS accordingly.
6 Camera Lens Records video of the surrounding area.
7 Microphone Records audio from the surrounding area.
8 WPS Status LED Indicates the WPS (Wi-Fi Protected Setup) connection status of the camera.
8
8
5
6
7
1
2
3
4

6D-Link DCS-5222L User Manual
Section 1 - Product Overview
Back
1 Ethernet Port Connect 10/100 Ethernet devices such as computers, switches, and routers.
2 Audio 3.5 mm jack for audio I/O devices such as microphones and speakers.
3 Reset Button Press the reset button to return the device back to it’s factory conditions.
4 DI/DO Attach digital I/O devices such as alarms or motion sensors.
5 Power Receptor Connects to the power adapter.
1
2
3
4
5

7D-Link DCS-5222L User Manual
Section 1 - Product Overview
Left and Right Side
1 Built in Speaker The speaker can be used in conjunction with the built-in microphone to enable the camera
to acts as an intercom.
2 Antenna The external antenna increases the device’s range of connectivity.
3 WPS Button Use WPS (Wi-Fi Protected Setup) to easily create a secure connection to your network.
4 microSD Slot Insert a microSD card to store recorded images and video.
1
2
3
4

8D-Link DCS-5222L User Manual
Section 1 - Product Overview
Wireless Installation Considerations
The D-Link Wireless Network Camera lets you access your network using a wireless connection from anywhere within the operating range of your
wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may
limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
The key to maximizing wireless range is to follow these basic guidelines:
1. Minimize the number of walls and ceilings between your adapter and other network devices (such as your Network Camera) -
each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters).
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be
almost 3 feet (1 meter) thick. At a 2-degree angle, it looks over 42 feet (14 meters) thick. Position your devices so that the signal
will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building Materials make a dierence. A solid metal door or aluminum studs may weaken the wireless signal. Try to position
your access points, wireless routers, and other networking devices where the signal passes through drywall or open doorways.
Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete
will degrade your wireless signal.
4. Keep your product at least 3-6 feet or 1-2 meters away from electrical devices or appliances that generate RF noise.
5. If you are using 2.4GHz cordless phones or other radio frequency sources (such as microwave ovens), your wireless connection
may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as
possible. The base transmits a signal even if the phone in not in use.

9D-Link DCS-5222L User Manual
Section 2 - Installation
Installation
Camera Installation Wizard
If you have a D-Link Cloud Router, skip to the next page and follow the steps. You do not have to download and run the
setup wizard software.
If you do not have a cloud router, open a web browser and go to http://www.mydlink.com/download. Click your camera model
and then under Wizard, click the link of the version (Windows or Mac) you want to download. Depending on your web browser,
you may need to right-click the link and select Save link as. Once downloaded, launch the wizard and follow the on-screen
instructions. The wizard will walk you through connecting and conguring your camera. Once nished skip to page 12.
Note: If you experience issues registering this camera with your mydlink account, try performing a hard reset by using an unfolded
paperclip to press and hold the reset button for 10 seconds while the camera is powered on. This may be necessary if you have purchased
an open box or resold unit.

10D-Link DCS-5222L User Manual
Section 2 - Installation
Step 1:
Attach the power supply to the power input on the DCS-5222L and connect it to a
wall outlet or power strip. Power is conrmed when the Power LED is lit.
Step 2:
You can either connect an Ethernet cable from the camera to your router or useWPS.
If you want to use an Ethernet connection, connect the included Ethernet cable to
the Ethernet port on the DCS-5222L and connect it to your router.
If you want to use a wireless connection, press and hold the WPS button on the
camera for ve seconds.The WPS status LED will start to blink.Then, press the WPS
button on your Cloud Router within two minutes.
Step 3:
From any computer, open a web browser, go to http://www.mydlink.com and
log into your account. Once mydlink detects your camera, a New Device Found!
notice will appear in the bottom-left corner. Click on the camera from the New
Devices list and then click Yes to add your camera.
Your setup is complete!
Note: The Zero Conguration Setup will only work with a registered D-Link Cloud Router and an active mydlink account. Your Cloud
Router will automatically assign your network settings (both wired and wireless) to your camera.

11D-Link DCS-5222L User Manual
Section 2 - Installation
Zero Conguration will navigate to the mydlink LiveView tab for your camera
where you will see a screen similar to the following.
If you wish to connect your camera to your router wirelessly, you can simply
disconnect the Ethernet cable and move the camera to its intended location;
your router's wireless settings have been automatically transferred to the
camera, and no further conguration is required.
Your camera is now set up, and you can skip to“mydlink”on the next page to
learn more about the mydlink features of this camera, or to “Conguration”
on page 17 for advanced conguration of your camera.

12D-Link DCS-5222L User Manual
Section 3 - mydlink
mydlink
After registering your DCS-5222L camera with a mydlink account in the Camera Setup Wizard. You will be able to remotely
access your camera from the mydlink.com website. After signing in to your mydlink account, you will see a screen similar to
the following:

13D-Link DCS-5222L User Manual
Section 3 - mydlink
Camera Status
A green check mark indicates that your camera is online and ready to use.
A yellow exclamation point indicates that your camera is online, but the camera password
has changed. You will need to enter your new camera password to access your camera again.
If your camera is oine, try the following:
• Check to make sure that the Internet connection to your
camera is working properly.
• Try restarting your broadband router.
• Check your camera’s cable connections and make sure
they are secure.
• Check to make sure that the power LED on your camera
is lit solid red.
If you still cannot access your camera, reset your camera and
run the Camera Setup Wizard again from the CD-ROM included
in your package.
The online status of each camera will be displayed. Your online status may be one of the following:
A red x indicates that your camera is oine and currently cannot be accessed remotely.
LED Indicative Color Status Description
Link Green
O Link down
On Link up
Blinking Monitoring
Power Red O Power O
On Power On
WPS Blue
Blinking (1 sec
interval)
Setting is
on going
On Success
Blinking 10 seconds
(0.1 sec interval) O
Fail / Standby

14D-Link DCS-5222L User Manual
Section 3 - mydlink
Live Video
If the camera is available, a Live Video feed will be displayed. Video will be shown at full resolution if viewing your camera from
a PC on the same local network, or viewing your camera from a PC on a remote network.