D-Link DIR 601 - Dlink Wireless N 150 Home Router User manual

iD-Link DIR-601 User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to
notify any person or organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the
United States or other countries. All other company or product names mentioned herein are trademarks or registered
trademarks of their respective companies.
Copyright © 2009 by D-Link Systems, Inc.
All rights reserved.This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Systems, Inc.
Revision Date Description
1.0 October 8, 2009 • Revision A1 with firmware version 1.00
Preface

iiD-Link DIR-601 User Manual
Table of Contents
Preface...........................................................................i
Manual Revisions ..................................................... i
Trademarks ............................................................... i
Product Overview ........................................................1
Package Contents....................................................1
System Requirements .............................................2
Features................................................................... 3
Hardware Overview .................................................4
Connections....................................................... 4
LEDs ..................................................................5
Installation....................................................................6
Before you Begin .....................................................6
Wireless Installation Considerations........................7
Network Diagram .....................................................8
Connect to Cable/DSL/Satellite Modem ..................9
Connect to Another Router....................................10
Getting Started ...................................................... 12
Configuration.............................................................13
Web-based Configuration Utility ............................13
Internet Connection Setup Wizard ................... 14
Manual Configuration....................................... 19
Dynamic (Cable)...........................................19
Dynamic IP Address (DHCP) .......................20
PPPoE (DSL) ...............................................21
PPTP............................................................23
L2TP.............................................................25
Static IP Address..........................................27
Wireless Settings .............................................29
Manual Wireless Network Setup ..................30
Network Settings.............................................. 32
DHCP Server Settings .................................33
DHCP Reservation.......................................34
Virtual Server................................................... 36
Port Forwarding ...............................................38
Application Rules .............................................39
QoS Engine ..................................................... 40
Network Filters................................................. 41
Access Control................................................. 42
Access Control Wizard .................................42
Website Filters ................................................. 45
Inbound Filters .................................................46
Firewall Settings............................................... 47
Routing ............................................................48
Advanced Wireless Settings ............................ 49
Advanced Network Settings............................. 50
UPnP............................................................50
Internet Ping Block ....................................... 50
Internet Port Speed ...................................... 50
Multicast Streams.........................................50
IPv6.................................................................. 51
Link-Local Connectivity ................................51
Static IPv6 (Stateful) ....................................52
Table of Contents

iiiD-Link DIR-601 User Manual
Table of Contents
Static IPv6 (Stateless).................................. 53
DHCPv6 (Stateful)........................................54
DHCPv6 (Stateless) .....................................55
IPv6 over PPPoE (Stateful) .......................... 56
IPv6 over PPPoE (Stateless)........................ 58
6 to 4 Tunneling (Stateful) ............................60
6 to 4 Tunneling (Stateless)..........................61
IPv6 in IPv4 Tunneling (Stateful) .................. 62
IPv6 in IPv4 Tunneling (Stateless)................63
Administrator Settings...................................... 64
Time Settings................................................... 65
SysLog............................................................. 66
E-mail Settings................................................. 67
System Settings............................................... 68
Update Firmware .............................................69
DDNS............................................................... 70
System Check.................................................. 71
Schedules ........................................................72
Device Information ........................................... 73
Log................................................................... 75
Stats................................................................. 76
Internet Sessions ............................................. 77
Routing Table ...................................................79
Wireless ...........................................................80
IPv6.................................................................. 81
Support ............................................................ 82
Wireless Security.......................................................83
What is WPA? ........................................................83
Wireless Connection Setup Wizard .......................84
Add Wireless Device with WPS Wizard .................86
Configure WPA-Personal (PSK)............................. 87
Configure WPA-Enterprise (RADIUS)....................88
Connect to a Wireless Network ................................ 90
Using Windows Vista®............................................90
Configure WPA/WPA2......................................91
Connect Using WCN 2.0.................................. 93
Using Windows®XP............................................... 94
Configure WPA-PSK ........................................95
Troubleshooting.........................................................97
Wireless Basics .......................................................101
What is Wireless? ................................................102
Tips...................................................................... 104
Wireless Modes ...................................................105
Networking Basics .................................................. 106
Check your IP address ........................................106
Statically Assign an IP address ........................... 107
Technical Specifications.........................................108
Contacting Technical Support................................ 109
Warranty ................................................................... 110
Registration..............................................................116

1D-Link DIR-601 User Manual
Section 1 - Product Overview
Product Overview
Note: Using a power supply with a different voltage rating than the one included with the DIR-601 will cause damage and
void the warranty for this product.
Package Contents
D-Link DIR-601 Wireless N
150 Home Router
Power Adapter
Ethernet Cable
CD-ROM

2D-Link DIR-601 User Manual
Section 1 - Product Overview
Network Requirements
• An Ethernet-based Cable or DSL modem
• IEEE 802.11n-draft/g wireless clients
• 10/100 Ethernet
Web-based Configuration
Utility Requirements
Computer with the following:
• Windows®, Macintosh, or Linux-based operating
system
• An installed Ethernet adapter
Browser Requirements:
• Internet Explorer®6.0 and higher
• Mozilla Firefox 3.0 and higher
• Google™ Chrome 2.0 and higher
• Apple Safari 3.0 and higher
Windows®Users: Make sure you have the latest version
of Java installed. Visit www.java.com to download the
latest version.
CD Installation Wizard
Requirements
Computer with the following:
• Windows®XP with Service Pack 2 or Vista®
• An installed Ethernet adapter
• CD-ROM drive
System Requirements

3D-Link DIR-601 User Manual
Section 1 - Product Overview
• Faster Wireless Networking - The DIR-601 provides up to 150Mbps.* This capability allows users to
participate in real-time activities online, such as video streaming, online gaming, and real-time audio.
• Compatible with 802.11g Devices - The DIR-601 is still fully compatible with the IEEE 802.11g standard,
so it can connect with existing 802.11g PCI, USB and Cardbus adapters.
• Advanced Firewall Features - The Web-based user interface displays a number of advanced network
management features including:
• Content Filtering - Easily applied content filtering based on MAC Address, URL, and/or
Domain Name.
• Filter Scheduling - These filters can be scheduled to be active on certain days or for a
duration of hours or minutes.
• Secure Multiple/Concurrent Sessions - The DIR-601 can pass through VPN sessions. It
supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-601
can securely access corporate networks.
• User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DIR-601 lets you
control what information is accessible to those on the wireless network, whether from the Internet or from
your company’s server. Configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
conditions will adversely affect wireless signal range.
Features

4D-Link DIR-601 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
Power Receptor
Receptor for the supplied power
adapter.
LAN Ports (1-4)
Connect Ethernet devices such as
computers, switches, and hubs.
Reset
Pressing the Reset button restores the router to
its original factory default settings.
Internet Port
The auto MDI/MDIX Internet port is
the connection for the Ethernet cable
to the cable or DSL modem.

5D-Link DIR-601 User Manual
Section 1 - Product Overview
WLAN LED
A solid light indicates that the wireless
segment is ready. This LED blinks
during wireless data transmission.
Internet LED
A solid light indicates connection on
the Internet port. This LED blinks
during data transmission.
Power LED
A solid light indicates a
proper connection to the
power supply.
Local Network LEDs
A solid light indicates a connection to an
Ethernet-enabled computer on ports 1-4. This
LED blinks during data transmission.
Hardware Overview
LEDs

6D-Link DIR-601 User Manual
Section 2 - Installation
Before you Begin
This section will walk you through the installation process. Placement of the router is very important. Do not place the
router in an enclosed area such as a closet, cabinet, or in the attic or garage.
• Please configure the router with the computer that was last connected directly to your modem.
• You can only use the Ethernet port on your modem. If you were using the USB connection before using
the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable
to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call
your ISP to change connection types (USB to Ethernet).
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software
such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to
the Internet.
• When running the Setup Wizard from the D-Link CD, make sure the computer you are running the CD
from is connected to the Internet and online or the wizard will not work. If you have disconnected any
hardware, re-connect your computer back to the modem and make sure you are online.
Installation

7D-Link DIR-601 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within
the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls,
ceilings, or other objects that the wireless signals must pass through, may limit the range.Typical ranges vary depending
on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing
wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum
- each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices
so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet
(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead
of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on
range. Try to position access points, wireless routers, and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water
(fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that
generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and
home security systems), your wireless connection may degrade dramatically or drop completely. Make
sure your 2.4GHz phone base is as far away from your wireless devices as possible.The base transmits
a signal even if the phone in not in use.

8D-Link DIR-601 User Manual
Section 2 - Installation
Network Diagram

9D-Link DIR-601 User Manual
Section 2 - Installation
If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter. Shut down
your computer.
3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the
Internet port on the router.
4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your
computer.
5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).
6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router
to boot.
7. Turn on your computer.
8. Verify the link lights on the router. The power light, Internet light, and the LAN light (the port that your computer is
plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable
connections are correct.
9. Skip to page 12 to configure your router.
Connect to Cable/DSL/Satellite Modem

10D-Link DIR-601 User Manual
Section 2 - Installation
If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have
to do the following before connecting the router to your network:
• Disable UPnP™
• Disable DHCP
• Change the LAN IP address to an available address on your network. The LAN ports on the router cannot
accept a DHCP address from your other router.
To connect to another router, please follow the steps below:
1. Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable.
Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the
Networking Basics section for more information. If you need to change the settings, write down your existing settings
before making any changes. In most cases, your computer should be set to receive an IP address automatically in
which case you will not have to do anything to your computer.
2. Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user
name to Admin and leave the password box empty. Click Log In to continue.
3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings
to continue.
4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server server checkbox. Click Save
Settings to continue.
5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to
save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the
browser and change your computer’s IP settings back to the original values as in Step 1.
Connect to Another Router

11D-Link DIR-601 User Manual
Section 2 - Installation
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug
anything into the Internet port of the D-Link router.
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers.To configure your wireless
network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and
Wireless Security sections for more information on setting up your wireless network.

12D-Link DIR-601 User Manual
Section 2 - Installation
Note: It is recommended to write down the login password on the provided CD holder.
The DIR-601 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to
guide you quickly through the installation process. You may manually configure your router without the wizard. Refer
to the next page to manually setup your router.
Insert the Quick Router Setup Wizard CD in the CD-ROM drive. The step-by-step instructions that follow are shown
in Windows®XP or Vista®. The steps and screens are similar for the other Windows®operating systems.
If the CD autorun function does not automatically start on your computer, go to Start > Run. In the run box type
“D:\DIR601.exe” (where D: represents the drive letter of your CD-ROM drive).
When the autorun screen appears, click Install Router
and follow the on-screen instructions.
Getting Started

13D-Link DIR-601 User Manual
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link wireless router using the web-based configuration
utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser
such as Internet Explorer and enter the IP address of
the router (192.168.0.1).
Select Admin from the drop-down menu and then enter
your password. Leave the password blank by default.
If you get a Page Cannot be Displayed error, please
refer to the Troubleshooting section for assistance.

14D-Link DIR-601 User Manual
Section 3 - Configuration
Internet Connection Setup Wizard
Once logged into the web interface of the router, the Setup > Internet page will appear. Click the Internet Connection
Setup Wizard button to quickly configure your router using the setup wizard.
If you want to enter your settings without running the wizard, click Manual Internet Configuration Wizard and skip
to page 19.

15D-Link DIR-601 User Manual
Section 3 - Configuration
Click Next to continue.
Create a new password and then click Next to
continue.
Select your time zone from the drop-down menu and
then click Next to continue.

16D-Link DIR-601 User Manual
Section 3 - Configuration
If you selected Dynamic, you may need to enter
the MAC address of the computer that was last
connected directly to your modem.If you are currently
using that computer, click Clone Your PC’s MAC
Address and then click Next to continue.
The Host Name is optional but may be required by
some ISPs.The default host name is the device name
of the Router and may be changed.
Select the type of Internet connection you use and
then click Next to continue.