D-Link DKVM-IP1 User manual

1
Before You Begin
DKVM-IP1
1 Port KVM Switch
Over IP
This product can be set
up using Web browser,
i.e., Internet Explorer 6 or
Netscape Navigator 7.0
You must have at least the following:
• PS/2 Keyboard
• PS/2 Mouse
• VGA or Higher Monitor
• An available Ethernet port
• An available USB port(Option)
Check Your Package Contents
These are the items included with your purchase:
DKVM-IP1 KVM Switch
Quick Installation Guide
CD-ROM with Manual and Software

USB 2.0 Cable in 6ft
3 in 1 KVM Cable in 3ft
Cat.5 Ethernet Cable
Serial Cable
Rack Mount Kit
5V 2.5A DC Power Adapter
2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.
Software and specifications subject to change without notice.
If any of the above items are missing, please contact your reseller.

3
Hardware Overview
Front Panel
Ethernet Port
Connects to a
Router or Hub
Serial Port
Connects to a
modem
VGA Port
Connects to a
monitor
PS/2 Port
Connects to a
keyboard
PS/2 Port
Connects to a
mouse
Rear Panel
VGA Port
Connects to a PC/
Server or the corre-
sponding console side
of another KVM switch
PS/2 Port
Connects to a PC/Serv-
er or the corresponding
console side of another
KVM switch
PS/2 Port
Connects to a PC/Serv-
er or the corresponding
console side of another
KVM switch
USB Port
Connects to a PC/
Server USB port
Power Receptor
Connects to a PC/Serv-
er or the corresponding
console side of another
KVM switch

4
Hardware Installation
Plug the Ethernet cable to the
Ethernet port located on the front
panel of the DKVM-IP1
Make sure that all your computers are turned OFF before installing the DKVM-IP1 to
avoid mouse and keyboard errors when booting up your computers.
Plug the DB 9 connector into the
serial port located on the front
panel of the DKVM-IP1(Option)
Attach your monitor’s HDDB 15
VGA connector to the console port
of the DKVM-IP1.

5
Hardware Installation
Attach your computer’s PS/2
keyboard connector to the console
port of the DKVM-IP1
Attach your computer’s PS/2 mouse
connector to the console port of the
DKVM-IP1.
Attach the KVM cable(VGA con-
nector) to the VGA port located on
the rear panel of the DKVM-IP1.

6
Hardware Installation
Attach the KVM cable(mouse con-
nector) to the mouse port located
on the rear panel of the DKVM-IP1
Attach the KVM cable(keyboard
connector) to the keyboard port
located on the rear panel of the
DKVM-IP1.
Plug the USB type B connector into
the USB port located on the rear
panel of the DKVM-IP1(Option)
Plug the power adapter into the
receptor located on the rear panel
of the DKVM-IP1

7
Hardware Installation
Attach the KVM cable(VGA con-
nector) to the VGA port located on
the back of your computer case or
connect to the console VGA port
located on the another KVM switch
Attach the KVM cable(keyboard
connector) to the keyboard port lo-
cated on the back of your computer
case or connect to the console key-
board port located on the another
KVM switch
Attach the KVM cable(mouse con-
nector) to the mouse port located
on the back of your computer case
or connect to the console mouse
port located on the another KVM
switch
Power ON all your attached computers
after you have completed the DKVM-IP1
hardware installation
Note : The DKVM-IP1 are provide two kind of console client, one is window client and
another is java client for user alternative. Please refer to following
For Java client : Please download the “Java VM” program from http:// www.java.com or install
from CD-ROM
For Windows client : Please install the ”KVM Vision Viewer” that is included on CD-ROM

8
Configuring the DKVM-IP1
Input a static IP address in the same
range as the DKVM-IP1(192.168.0.xx)
Open your Web browser and
type http://192.168.0.70 into the
URL address box. Then press
the Enter or Return key.
Click OK to apply
the new settings
Click OK
Select Use the following IP address
IP address: 192.168.0.28
Subnet mask: 255.255.255.0
Note : 1. If you connect this DKVM-IP1 directly to a PC, you will need a cross-over
Ethernet cable.
2.If you plug the DKVM-IP1 to a Hub or Router, you will be able to use the cable included with
your DKVM-IP1
This installation and configuration of the DKVM-IP1 is now complete.

9
Technical Support
You can find software updates and user documentation on the D-Link websites.
D-Link provides free technical support for customers within Canada,
the United Kingdom, and Ireland.
Customers can contact D-Link technical support through our websites,
or by phone.
For Customers within
The United Kingdom & Ireland:
D-Link UK & Ireland Technical Support over the Telephone:
08456 12 0003 (United Kingdom)
[phone] (Ireland)
Lines Open
8.00am-10.00pm Mon-Fri
10.00am-7.00pm Sat & Sun
D-Link UK & Ireland Technical Support over the Internet:
http://www.dlink.co.uk
ftp://ftp.dlink.co.uk
For Customers within Canada:
D-Link Canada Technical Support over the Telephone:
1-800-361-5265 (Canada)
Monday to Friday 7:30 am to 3:00 am ET
D-Link Canada Technical Support over the Internet:
http://support.dlink.ca
email: [email protected]