Da-Lite Model B User manual

DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: [phone]
800-622-3737
Fax: [phone]
Toll Free Fax: [phone]
www.da-lite.com
e-mail: [email protected]
Operating Instructions for
MODEL B® WITH CSR
CONTROLLED SCREEN RETURN
The Da-Lite Difference.

1
YOU HAVE MADE A WISE SELECTION...
in choosing a Da-Lite projection screen designed and engineered to produce the sharpest, most pleasing
pictures with the maximum convenience.
PROTECT YOUR SCREEN by keeping it rolled in its protective case when not in use. Always examine both front and back of
surface before re-rolling into case to make certain screen is free of dust, dirt or other foreign matter. Use a very soft
duster to gently remove any foreign particles.
INSTALLATION
BUILT-IN HANGERS
Da-Lite wall/ceiling screens may be mounted on a wall,
map rail, suspended from ceiling or extension brackets.
Wall screens must be mounted level and with the case-
back parallel to the wall.
FOR WALL MOUNTING –
Use the keyhole slot at the back of the hanging bracket
for flush wall suspension. Position screws or other
fasteners into the wall and hang screen by using the
slots.
FOR MAP RAIL MOUNTING –
Use keyhole slots in flat brackets. Do not use “D” rings.
FOR CEILING SUSPENSION
If the screen is to be ceiling mounted, two screw hooks
should be placed in a beam or other solid surface. For
drop ceilings, Da-Lite’s T-Bar Clips may be purchased.
FOR
WALL
FOR
CEILING
• Exclusive Camlok® Roller System
• Attractively styled
• Easily installed
• Economically priced
Care in mounting and care in correct operation will mean a long and satisfactory life for your Da-Lite wall/ceiling screen.
Locate the screen where the audience can best see it and where other furnishings in the room permit. Mount the screen
so that bottom of picture surface, when fully extended, will be above the heads of viewers.
QUALITY FEATURES FOR BETTER PICTURES, EASIER OPERATION, LONGER LIFE
• Completely self-storing
• Ideal for houses of worship, schools, family centers and
industrial training rooms.
For the finest in film and video projection

T-BAR CLIP
For Dropped Ceilings
50 lb. max. load capacity.
No. 23 ADJUSTABLE
WALL BRACKETS
Screen can be extended 10",
14", 153⁄4", 181⁄4", 20" or 24" from
wall by wing nut and bolt`
adjustment.
No. 11 WALL BRACKETS
Screen can be extended 10"
or 14" from wall by changing
position of bracket.
No. 6 WALL BRACKETS
Screen can be extended 6"
from wall.
TILT LOCK
For Keystone Elimination
Holds back bottom of
screen in tilted position
to eliminate keystoning.
SCREEN ACCESSORIES
WALL BRACKETS (75# per pair maximum)
Da-Lite No. 6 and No. 11 Non-adjustable wall brackets
and No. 23 adjustable extension wall brackets are ideal
for keystone elimination, clearance, or corner mounting.
The screen brackets should be fastened to the studding
or other solid surface and not in the plaster only.
Suspend screen from “D” rings.
OPERATING INSTRUCTIONS
TO LOWER PICTURE SURFACE
Pull screen down all the way. HESITATE – then allow screen to retract VERY SLOWLY until it locks in place.
TO RAISE PICTURE SURFACE
Pull down on the pull bail, then release quickly. The screen will retract gently into the case.
TO ADJUST RETRACTION SPEED
Use a large flat screwdriver to turn the adjustment knob on the
right end of the screen. To increase the travel speed turn
counterclockwise. To decrease the travel speed turn clockwise.
Adjustments should be made in half turn increments and travel
speed checked before adjusting further.
NOTE: This feature is not available on some large screen sizes.
Call the factory for adjustment instructions.
If screen locks at the bottom and will not retract, turn adjustment knob
one quarter turn counterclockwise.
2

Printed in U.S.A. 85641 Rev. 4/10
LIMITED ONE YEAR WARRANTY
ON DA-LITE PRESENTATION PRODUCTS
Da-Lite Screen Company, Inc. warrants its products to the original purchaser only, to be free from
defects in materials and workmanship for a period of one (1) year from the date of purchase by
the original purchaser provided they are properly operated according to Da-Lite’s instructions and
are not damaged due to improper handling or treatment after shipment from the factory.
This warranty does not apply to equipment showing evidence of misuse, abuse or accidental
damage, or which has been tampered with or repaired by a person other than authorized Da-Lite
personnel.
Da-Lite’s sole obligation under this warranty shall be to repair or to replace (at Da-Lite’s option)
the defective part of the merchandise. Returns for service should be made to your Da-Lite dealer.
If it is necessary for the dealer to return the screen or part to Da-Lite, transportation expenses
to and from Da-Lite are payable by the purchaser and Da-Lite is not responsible for damage in
shipment. To protect yourself against damage or loss in transit, insure the product and prepay all
transportation expenses.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES AS TO FITNESS FOR USE AND MERCHANT ABILITY. Any implied
warranties of fitness for use, or merchantability, that may be mandated by statute or rule of law
are limited to the one (1) year warranty period. This warranty gives you specific legal rights, and
you may also have other rights, which vary from state-to-state. NO LIABILITY IS ASSUMED
FOR EXPENSES OR DAMAGES RESULTING FROM INTERRUPTION IN OPERATION OF
EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR CONSEQUENTIAL DAMAGES OF ANY
NATURE.
In the event that there is a defect in materials or workmanship of a Da-Lite product, you may
contact our Sales Partners at PO Box 137, Warsaw, IN 46581-0137, [phone], [phone].
IMPORTANT: THIS WARRANTY SHALL NOT BE VALID AND DA-LITE SHALL NOT BE
BOUND BY THIS WARRANTY IF THE PRODUCT IS NOT OPERATED IN ACCORDANCE WITH
DA-LITE’S WRITTEN INSTRUCTIONS.
Keep your sales receipt to prove the date of purchase and your original ownership.
DA-LITE IS MORE THAN PROJECTION SCREENS
Da-Lite Tripod, Wall and
Ceiling and Electric Screens Da-Lite Lecterns
Da-Lite
Project-O-Stands
and Easels
Da-Lite
Monitor Mounts
3