Dacor Epicure EF36BNFSS User manual

Instruction Sheet
forWaterTank Insulation Installation
Kit Part # 106807 (W101 77505)
Kit Contents:
1 Instruction Sheet
2 1 1!2"screws
1 EPSFoam Block
1 Foam Tape
NOTE: This kit fits non-Iceland 25 cu. ft. models.
1. Unplug the refrigerator or disconnect power.
2. Remove crisper drawers ( Figure l ),crisperglasstop(Figure2)andcrisperframe(Figure3).
FigureI Figure2 Figure3
3. If present, remove previously installed gasket from the back flange of crisper frame and permagum surrounding the dell air feed hole
(this will require disassembly of dell pantry).
4. Using a 1/4"hex driver, unscrew the water tank while keeping the water lines connected. See Figure 4.
Figure4
5. Checkwatertankandc_nnectingwater_inesf_ranyfr_zenwater._ficeispresent_defr_stwithaheatgun.
©WMrtpooECorporation2007 Instruction Sheet W10130142 Rev.A 8/07
(AItRightsReserved) page 1 of 2

6. Apply foam tape to EPS Foam Block as shown in Figure 5.
EPSFOAM
BLOCK
_5
7. Tip the water tank forward and push it onto the EPS Foam Block as shown in Figure 6.
_u_6
8. Using the (2) 1-1/2" screws provided in the kit, screw the water tank and EPS Foam Block back into the refrigerator with a W' hex
driver. The (2) screw holes in the water tank will line up with the (2) screw holes in the EPS Foam Block. See Figure 7.
_7
9. Replace crisper frame (Figure 8), the crisper glass top (Figure 9) and the crisper drawers (Figure 10) back into the refrigerator.
Figure8 Figure9 Figure10
10. Instruct the customer on the nature of the repair and action taken to resolve the freezing tank issue.
11. Plug in refrigerator or reconnect power.
W10130142A
page 2 of 2