Daewoo DTD-14D3 ME User manual

Service Manual
Items Model DTD-14D3/20D3/21D3 ME/MT/MP/MZ
14D4/20D4/21D4 ME/MT/MP/MZ
14D6/21D6 ME/MT/MP/MZ
14D7/20D7/21D7 ME/MT/MP/MZ
21U6/21U8 ME/MT/MP/MZ
TV Standards PAL-SECAM-B/G,D/K,I,NTSC-M,NTSC-4.43(AV)
MainsVoltage AC 100~250V, 50/60Hz
Power Consumption Stand-by mode : 5W
Normal Operating Mode :14”=85W, 20”=95W, 21”=105W, 21”(flat)=115W
Sound Ouput1 14/20”=5W+5W Over(80% MOD.at 1KHz THD.10%)
21U6=5W+5W Over(80% MOD.at 1KHz THD.10%)
21”,21U8=7W+7W Over(80% MOD.at 1KHz THD.10%)
Speaker 14/20”=7.5W 8 Ohm (2pcs)
21U6=5W 8 Ohm (2pcs) , 21”,21U8=12W 8 Ohm (2pcs)
Antenna 75 Ohm Unbalanced. (DIN Standard)
Tuning System FS Tuning System
Memory Channel 100 Channels
Remocon Control R-44C07
ReceptionChannel VHF - BAND1 : CH2-CH4
BAND2 : CH5-CH12
CABLE BAND : S1’-S3, S1-S20
HYPER BAND : S21-S41
UHF-BAND : CH21-CH69
Remark OSD
TELETEXT (Top & Flop Teletext)
PIP(AV PIP, Swap, Size, Position)
Digital Eye
Colour Television
CHASSIS : CM-905S/SF
Model :
DTD- 14D3/20D3/21D3 ME/MT/MP/MZ
14D4/20D4/21D4 ME/MT/MP/MZ
14D6/21D6 ME/MT/MP/MZ
14D7/20D7/21D7 ME/MT/MP/MZ
21U6/21U8 ME/MT/MP/MZ
S/M No. :TCM905SEF0
DAEWOO ELECTRONICS CO., LTD
http : //svc.dwe.co.kr June.2001
Specification
All manuals and user guides at all-guides.com
all-guides.com

- 1 -
TABLE OF CONTENTS
SPECIFICATIONS .............................................................................................................. 2
SAFETY INSTRUCTION .................................................................................................... 3
CIRCUIT BLOCK DIAGRAM ............................................................................................. 4
ALIGNMENT INSTRUCTIONS .......................................................................................... 5
CM-905S/SF TYPICAL SERVICE DATA ............................................................................ 8
SCHEMATIC DIAGRAM ..................................................................................................... 11
PRINTED CIRCUIT BOARD .............................................................................................. 12
MECHANICAL EXPLODED VIEW AND PARTS LIST ...................................................... 13
ELECTRICAL PARTS LIST ............................................................................................... 19
CM-905S/SF EACH MODEL PARTS LIST ........................................................................ 29
APPENDIX (“Appendix is provided only by internet [http://svc.dwe.co.kr]”)
IC DESCRIPTION .............................................................................................................. 1
TROUBLE SHOOTING CHARTS ...................................................................................... 19
All manuals and user guides at all-guides.com

- 2 -
Items Model DTD-14D3/20D3/21D3 ME/MT/MP/MZ
14D4/20D4/21D4 ME/MT/MP/MZ
14D6/21D6 ME/MT/MP/MZ
14D7/20D7/21D7 ME/MT/MP/MZ
21U6/21U8 ME/MT/MP/MZ
TV Standards PAL-SECAM-B/G,D/K,I,NTSC-M,NTSC-4.43(AV)
MainsVoltage AC 100~250V, 50/60Hz
Power Consumption Stand-by mode : 5W
Normal Operating Mode :
14”=85W, 20”=95W, 21”=105W, 21”(flat)=115W
Sound Ouput1 14/20”=5W+5W Over(80% MOD.at 1KHz THD.10%)
21U6=5W+5W Over(80% MOD.at 1KHz THD.10%)
21”,21U8=7W+7W Over(80% MOD.at 1KHz THD.10%)
Speaker 14/20”=7.5W 8 Ohm (2pcs)
21U6=5W 8 Ohm(2pcs) , 21”,21U8=12W 8 Ohm (2pcs)
Antenna 75 Ohm Unbalanced. (DIN Standard)
Tuning System FS Tuning System
Memory Channel 100 Channels
Remocon Control R-44C07
Reception Channel VHF - BAND1 : CH2-CH4
BAND2 : CH5-CH12
CABLE BAND : S1’-S3, S1-S20
HYPER BAND : S21-S41
UHF-BAND : CH21-CH69
Remark OSD
TELETEXT (Top & Flop Teletext)
PIP(AV PIP, Swap, Size, Position)
Digital Eye
SPECIFICATIONS
CAUTION
All manuals and user guides at all-guides.com

- 3 -
SAFETY INSTRUCTION
CAUTION
NOTE
BEFORE SERVICING THIS CHASSIS READ THE “X-RAY RADIATION PRECAUTIONS”,
“SAFETY PRECAUTIONS” AND “PRODUCT SAFETY NOTICE” BELOW.
X-RAY RADIATION PRECAUTIONS
1. Excessivehigh voltagecan produce potentially hazard-
ousX-RAYRADIATION.To avoidsuch hazards,the
high voltage must not exceed the specified limit. The
nominal value of the high voltage of this receiver is
25kV(21”) at max beam current. The high voltage must
not,under any circumstances, exceed 27kV(21”).
Each time a receiver requires servicing, the high volt-
age should be checked. It is recommended the reading
SAFETY PRECAUTIONS
1. Potentials of high voltage are present when this
receiver is operating. Operation of the receiver outside
the cabinet or with the back cover removed involves a
shock hazard from the receiver.
1) Servicing should not be attempted by anyone who is
not thoroughly familiar with the precautions necessary
whenworking onhigh voltage equipment.
2) Always discharge the picture tube to avoid the shock
harzard before removing the anode cap.
3) Discharge the high potential of the picture tube before
handlingthe tube.The picturetube ishighly evacuated
and if broken, glass fragments will be violently expelled.
PRODUCT SAFETY
Many electrical and mechanical parts in this chassis have
specialsafety-related characteristics.
These characteristics are often passed unnoticed by a
visualinspection andthe X-RAYRADIATION protection
afforded by them cannot necessarily be obtained by using
replacementcomponents ratedfor highervoltage, wattage,
etc.
Replacement parts which have these special safety char-
acteristics are identified in this manual and its supple-
ments,electrical components having such featuresare
identified by designated symbol on the “PART LIST”.
Beforereplacing anyof thesecomponents, readthe “PART
LIST” in this manual carefully.
The use of substitute replacement part which do not have
the same safety characteristics as specified in the “PART
LIST”may created X-RAY RADIATION.
of the high voltage recorded as a part of the service
recorded as a part of the service records. It is important
to use an accurate and reliable high voltage meter.
2. The only source of X-RAY RADIATION in this TV
receiveris thepicture tube.For continuousRADIATION
protection, the replacement tube must be exactly the
same type tube as specified in the “PART LIST”.
2. If any FUSE in this TV receiver is blown, replace it will
the FUSE specified in the “PART LIST”.
3. When replacing a high wattage resistor (oxide metal
film resistor) in circuit board, keep the resistor 10mm
awayfrom circuitboard.
4. Keepwires awayfrom high voltage or high temperature
components.
5. Thisreceiver mustoperate betweenAC 100~240volts,
50/60Hz. NEVER connect to DC supply or any other
power or frequency.
All manuals and user guides at all-guides.com

- 4 -
CIRCUIT BLOCK DIAGRAM
CAUTION
All manuals and user guides at all-guides.com

- 5 -
ALIGNMENT INSTRUCTIONS
CAUTION
1. AGCADJUSTMENT
1) Pattern : PAL B/G 10CH Color BAR (RF Level = 60 dB)
2) Connect the Pattern Generator RF Output to Tuner RF Input.
3) Press the S10 Key of Service Remocon to enter the “AGC MODE”.
4)Execute the“AUTOAGC”using theVol-UpKey.
2.SCREEN ADJUSTMENT
1) Pattern : PAL B/G Retma
2) Press the NORMAL Key to set the “NORMAL 1” mode.
3) Press the S2 Key of Service Remocon.
4) Adjust the SCREEN VOLUME on FBT so that the horizontal line reach the cut-off point.
3. FOCUSADJUSTMENT
1) Pattern : PAL B/G Retma
2) Adjust the FOCUS VOLUME on FBT to obtain clear resolution.
4.WHITE BALANCEADJUSTMENT
1) Press the NORMAL Key to set the “NORMAL 1” mode.
2) Press the S8 Key of Service Remocon to enter the “WHITE BALANCE” mode.
3) Adjust the each color ( R,G,B ) which appears abnormally on the screen.
5. GEOMETRIC ADJUSTMENT
1) Press the NORMAL Key to set the “NORMAL 1” mode.
2) Press the S6 Key of Service Remocon to enter the “GEOMETRIC” mode.
5-1.VERTICALCENTERADJUSTMENT
1) Pattern : PAL B/G Retma
2)Choose the“V-CENTER” using thePr-Up/Down Keys.
3) Adjust the horizontal line of picture to coincide with the mechanical center marks of the CRT using the
Vol-Up/Down Keys.
*If the pattern is smaller than the screen, adjust the V-size to fit.
5-2.VERTICALSIZEADJUSTMENT
1) Pattern : PAL B/G Retma
2)Choose the“V-SIZE” using thePr-Up/Down Keys.
3) Adjust the vertical size of the picture using the Vol-Up/Down Keys.
All manuals and user guides at all-guides.com
all-guides.com

- 6 -
5-3.HORIZONTALCENTERADJUSTMENT
1) Pattern : PAL B/G Retma
2)Choose the“H-CENTER” usingthe Pr-Up/Down Keys.
3) Adjust the vertical line of picture to coincide with the mechanical center marks of the CRT usingthe
Vol-Up/DownKeys.
5-4.HORIZONTALSIZEADJUSTMENT
1) Pattern : PAL B/G Retma
2) Choosethe “H-SIZE”using thePr-Up/DownKeys.
3) Set each side over scan to be 10% using the Vol-up/Down Keys.
5-5.PINCUSHION ADJUSTMENT
1) Pattern : PAL B/G Crosshatch
2)Choose the“PARABOLA”usingthe Pr-Up/DownKeys.
Adjust parabola width to fit on screen.
3) Choosethe “CONER”using thePr-Up/DownKeys.
Adjust coner parabola to fit on screen.
4)Choose the“TRAPEZIUM” usingthe Pr-Up/DownKeys,
Adjust trapezium to fit on screen.
5-6.S-CORRECTION ADJUSTMENT
1) Pattern : PAL B/G Crosshatch
2)Choose the“S-CORRECTION” usingthe Pr-Up/Down Keys.
3) Adjust each distance of horizontal line to be the same using the Vol-Up/Down Keys.
5-7.SUB-BRIGHTNESS ADJUSTMENT
1) Pattern : PAL B/G Retma
2) Press the NORMAL Keys to set the “NORMAL 1” mode.
ALIGNMENT INSTRUCTIONS
All manuals and user guides at all-guides.com

- 7 -
ALIGNMENT INSTRUCTIONS
6. REMOCON
6-1. SERVICEREMOCON 6-2. USER REMOCON
6-3.SERVICEREMOCON
1) Enter SERVICE MODE : Press keys of User Remocon, as follows.
Ch91, Sharpness 0, Skip(red), Move(green), Menu.
2) Choice SERVICE MENU : Pr-Up/Down
3)Enter SERVICESUBMENU :Vol-Up/Down
4)Adjust SERVICEMENU: Vol-Up/Down
S1 S2 S3
S4 S5 S6
S7 S8 S9
S11
RECALL
S10 S12
MUTE POWER
TV/CATV
ADD/ERASE
TV/VIDEO
SOUND MODE
SURROUND
NOISE CLEAR
CH
VOLVOL
CH
MENU
PIP M/S
CH VOL
V-
POSITION
POSITION
TV/VIDEO PAUSE/
STILL
SIZE SLEEP
1
3456
7
R-34SVC
890
2
All manuals and user guides at all-guides.com

- 8 -
CM-905S/SF TYPICAL SERVICE DATA
CAUTION
CM-905S/SF SVC KEY & FUNCTION DESCRIPTION
EY N NAME RFUNCTION
PRESS THE S1 ONE TINE ----> PRESS THE S1 ANOTHER TIME
(HEATRUN MODE) (NORMAL OPRATION)
*FBT SCREEN ADJUSTMENT
PRESS THE S2 ON TIME ----> PRESS THE S2 ANOTHER TIME
(HORIZONTAL KINE) (NORMALOPRATION)
*SOUNDTEST
PRESS THE S3 KEY IS TOGGLE
VOLUME00 ---->VOLUME 32----> VOLUME63--->
BALANS LEFT ----> BALANS RIGHT ----> BALANS 00 ----> RELEAS
*PICTURETEST
PRESS THE S4 KEY IS TOGGLE
CONTRAST 00 ----> CONTRASR 32 ----> CONTRAST 63 ---->
RRIGHT 00 ----> BRIGHT 32 ----> BRIGHT 63 ---->
COLOR 00 ----> COLOR 32 ----> COLOR 63 ----> RELEASE
*ADJUSTNORMAL1DATA INITIALDATA
CONTRAST 48 63
RRIGHT 38 23
COLOR 38 32
SHARPNESS 28 32
*ADJUSTGEOMETRYDATA
21 inch Normal 21 inch Flat Normal INITIALDATA(50Hz)
V-CENTER 04 04 04
V-SIZE 54 58 27
H-CENTER 11 12 14
H-SIZE 53 52 58
S6 PARABORA 27 48 27
TRAPEZIUM 15 17 15
CORNER 05 05 05
H-EHT 03 03 03
S-CORRECTION 08 08 07
V-LINEARITY 08 07 09
V-EHT 03 03 03
*ADJUSTPIP DATA
21 inch Normal 21 inch Flat Normal
R 220 220 128
G 220 220 128
B 220 220 128
S1 HEATRUN MODE
S2 SCREEN
ADJUSTMENT
S3 SOUND TEST
S4 PICTURE TEST
S7 PIP INITIALDATA
Line Production
Line Production
ON/OFF
ON/OFF
NORMAL1
S5
All manuals and user guides at all-guides.com

- 9 -
CM-905S/SF SVC KEY & FUNCTION DESCRIPTION
WHITE BALANCE *ADJUST WHITE BALANCE DATA
RB R LOW BEAM 127
GB G LOW BEAM 146
BB B LOW BEAM 125
GG G HIGH BEAM 52
BG B HIGH BEAM 52
SUB-BRIGHT ADJUST BRIGHTNESS DATA 35
SUB-CONTRAST ADJUST SUB CONTRAST DATA 15
*MAIN RF AGC ADJUSTMENT KEY
AGC TUNER AGC VOLTAGE 3.5Vdc
AUTO-AGC
DATA 32
*OPTION MODE ADJUSTMENT KEY INITIAL DATA
TEXT ARABIC/CYRILLIC/IRANIAN/EAST-LATIN//WEST-LATIN ARABIC
POWER-ON-START ON/OFF ON
DIGITAL EYE ON/OFF ON
*OUTDATA
PICTURE NORMAL 1
BLUESCREEN ON
BASS CENTER
TREBLE CENTER
BALANCE CENTER
EFFECT OFF
CLOCK
ONTIMER
ONTIMER
ON/OFF
ON PR 1
OFFTIMER
OFFTIMER
ON/OFF
LANGUAGE ENGLISH
COLORSYSTEM PAL
SOUNDSYSTEM BG
SOUND MODE MEMORY
NAME(EACHPR) ----
TV/AV1/AV2 TV
S8
S9
S10
S11
S12 OFF
OFF
CM-905S/SF TYPICAL SERVICE DATA
All manuals and user guides at all-guides.com

- 10 -
CM-905S/SF SVC KEY & FUNCTION DESCRIPTION
TV/TEXT TV
LAST PR 1
VOLUME
PICTURE SIZE NORMAL ( 4:3 )
CHILD LOCK OFF
CH LOCK OFF
S12
CM-905S/SF TYPICAL SERVICE DATA
SUB MENU
NO NAME FUNCTION
1 PIP ON / OFF (PIP) ON/OFF displaya sub-picture
2 SWAP (PIP) The main picture and sub-picture are swapped
3 SIZE (PIP) The sub-picture will be smaller. To return to be normal size, Press this button again.
4 TV / VIDEO (PIP) To select the input for the sub pictrue
5 POSITION (PIP) The display position of the sub-picture will changed
6 S2DATAchanged
RB 128
GB 0
SCREEN BB 0
GG 64
BG 64
Brightness 32
7 DIGITAL EYE DIGITAL DYEfuntionON/OFF
8 ZOOM Picture size changed ( 4:3 -> 16:9 -> ZOOM -> 4:3 -> .... )
9 TEXT TEXT funtion ON/OFF
10 CH UP USING the SERVICE MODE to CH UP/DOWN
11 CHDOWN
12 RESISTER
13 RELEASE
All manuals and user guides at all-guides.com
all-guides.com

SCHEMATIC DIAGRAM
- 11 -
All manuals and user guides at all-guides.com

PRINTED CIRCUIT BOARD
PCB MAIN
- 12 -
All manuals and user guides at all-guides.com

- 13 -
MECHANICAL EXPLODED VIEW AND PARTS LIST
CAUTION
1. DTD-21D7
All manuals and user guides at all-guides.com

- 14 -
MECHANICAL EXPLODED VIEW AND PARTS LIST
2. DTD-21D6
All manuals and user guides at all-guides.com

- 15 -
MECHANICAL EXPLODED VIEW AND PARTS LIST
3. DTD-21D4
All manuals and user guides at all-guides.com
all-guides.com

- 16 -
MECHANICAL EXPLODED VIEW AND PARTS LIST
4. DTD-21D3
All manuals and user guides at all-guides.com

- 17 -
MECHANICAL EXPLODED VIEW AND PARTS LIST
5. DTD-21U6
All manuals and user guides at all-guides.com

- 18 -
MECHANICAL EXPLODED VIEW AND PARTS LIST
6. DTD-21U8
All manuals and user guides at all-guides.com

- 19 -
ELECTRICAL PARTS LIST
LOC PART CODE PART NAME DECSCRIPTION REMARK
LOC PART CODE PART NAME DESCRIPTION REMARK
ZZ100 48B4844C07 TRANSMITTER REMOCON R-44C07 (AA)
ZZ110 PTACPWD414 ACCESSORYAS DTD-21D3MEP
100 4850Q00810 BATTERY R6P/LN
200 48586054K1 MANUALINSTRUCTION DTM-2082CW
M001 4858213800 BAGINSTRUCTION L.D.P.E T0.05X250X400
ZZ120 PTBCSHA686 COVER BACK AS DTD-14D3ME
M211 4852152321 COVERBACK HIPS BK
M541 4855415800 SPECPLATE 150ART P/E FILM (C/TV)
M781 4857817611 CLOTH BLACK FELT 200X20X0.7
M782 4857817640 CLOTH BLACK FELT 100X20X0.7
ZZ130 PTPKCPA686 PACKINGAS DTD-14D3ME
10 6520010100 STAPLEPIN 18M/M J D O
20 6520010200 STAPLEPIN #3417
M801 4858054300 BOX DW-3175X127X175
M811 4858187900 PAD EPS 14D3
M821 4858210600 BAG P.E L.D.P.E T0.03X1000X900
ZZ131 48519A4710 CRT GROUND NET 1401S-1015-1P
ZZ132 58G0000084 COIL DEGAUSSING DC-1450
ZZ140 PTCACAA686 CABINET AS DTD-14D3ME
40 2TF01612CL TAPEFILAMENT 0.15X12mmX55m
CRT1 PTRTPWA001 CRT AS PAL 14' ITC CRT AS
V01 58D1000046 COILDY ODY-M1401
V02 48A96R004- RUBBERWEDGE HMR 28 SR (|0X54)
V03 4850PM001- MAGNET CP NY-225 (MINI NECK)
V04 2TC26019BE TAPECLOTH 19X30 BEIGE
V05 2224050026 BOND SILICON RTV 122 CARTRIDGE
V901 48A96414P1 CRT BARE A34JLL90X
M191 4851936901 BUTTONCTRL 4940301+5537001
M201A 4856013300 SCREW CRT FIXING 30X80 BK
M201B 4856215402 WASHERRUBBER CRT2.0
M201C 4856013301 SCREW CRT FIXING 30X140 YL
M211A 7172401412 SCREW TAPPTITE TT2 TRS 4X14 MFZN BK
M211B 7178301212 SCREWTAPPTITE TT2 WAS 3X12 MFZN BK
M481 4854854201 BUTTONPOWER ABS BK
M481A 4856716000 SPRING SWPA PIE0.5
M561 48556136SS MARK BRAND SILVER ETCHING DIA-CUTTIN
M681 4856812001 TIE CABLE NYLON66 DA100
SP01A 7172401212 SCREW TAPPTITE TT2 TRS 4X12 MFZNCK
SP01B 7172401212 SCREW TAPPTITE TT2 TRS 4X12 MFZNCK
ZZ200 PTFMSJA686 MASK FRONT AS DTD-14D3ME
M201 4852068511 MASK FRONT HIPS BK
M251 4852535810 GRILL L SECC T0.5 14D3 L
M252 4852535910 GRILL R SECC T0.5 14D3 R
ZZ210 PTSPPWA686 SPEAKER AS DTD-14D3ME
P601A 4850704S27 CONNECTOR YH025-04+35098+ULW=400
SP01 4858310910 SPEAKER SP-5090F03
SP02 4858310910 SPEAKER SP-5090F03
ZZ290 PTMPMSA686 PCB MAIN MANUAL AS DTD-14D3ME
10 2TM18006BE TAPEMASKING 6.2X500
20 2TM10006LB TAPE MASKING 3M #232-MAP-C 6.2X2000M
C308 CEYF1E332V CELECTRO 25V RSS 3300MF (16X31.5)
C404 CMYH3C752J C MYLAR 1.6KV BUP 7500PF J
C408 CMYE2D624J C MYLAR 200V PU 0.62MF J
C801 CL1JB3474K C LINE ACROSS AC250V 0.47MF U/C/SNDF/SV
C805 CEYN2G181P CELECTRO 400V LHS 180MF (25X35)
C806 CBYB3D152K C CERA SEMI 2KV BL(N) 1500PF K
C810 CH1AFE222M C CERA AC 4KV 2200PF M KX DE1210
C812 CEYF2C221V C ELECTRO 160V RSS 220MF (18X35.5)
C828 CEYF1E332V CELECTRO 25V RSS 3300MF (16X31.5)
D802 DRGP30J--- DIODE RGP30J
D817 DEGP50D--- DIODE EGP50D(TAPPING)
DC01 DKLR114L-- LED KLR114L
F801 5F3GB4022L FUSEGLASS TUBE V/S TL 4A 250V MF51
HP01 4859102130 JACK EARPHONE YSC-1537
I301 PTB2SW7903 HEAT SINK ASS`Y 1TA8403K-- + 7174301011
1 1TA8403K-- IC TA8403K
0000A 4857027903 HEATSINK AL EX BK
0000B 7174301011 SCREWTAPPTITE TT2 RND 3X10 MFZN
I501 1TB1251N-- IC TB1251N
I571 1MM1118--- IC A/V SWITCH MM1118
I601 PTA2SW8218 HEAT SINK ASS`Y 1TDA7297-- + 7174301011
1 1TDA7297-- IC AUDIO AMP TDA7297
0000A 4857028218 HEATSINK AL EX
0000B 7174301011 SCREWTAPPTITE TT2 RND 3X10 MFZN
I602 1TDA9859-- IC AUDIO PROCESSOR TDA9859
I701 1DW5555AB1 IC MICOM DW5555-AB1 ®
I702 124LC16B1B IC MEMORY 24LC16B1B
I801 PTD2SW7910 HEAT SINK ASS`Y 1STRF6656- + 7174301211
1 1STRF6656- IC POWER STR-F6656
0000A 4857027910 HEATSINK AL EX
0000B 7174301211 SCREWTAPPTITE TT2 RND 3X12 MFZN
I802 4850M05210 MODULE POWER DPM123TIA
I803 TX0202DA-- THYRISTOR X0202DA1BA2
I804 1LP295033- ICREGULATOR LP2950 3.3V
I805 PTH2SW6900 HEAT SINK ASS`Y 1KA7805--- + 7174301011
1 1KA7805--- IC REGULATOR KA7805
0000A 4857026900 HEATSINK AL EX
0000B 7174300811 SCREWTAPPTITE TT2 RND 3X8 MFZN
I806 PTH2SW6902 HEAT SINK ASS`Y 1K1A7809P1 + 7174301011
1 1K1A7809P1 IC REGULATOR K1A7809API
0000A 4857026902 HEATSINK AL EX BK
0000B 7174301011 SCREWTAPPTITE TT2 RND 3X10 MFZN
I808 PTH2SW6900 HEAT SINK ASS`Y 1KA7805--- + 7174301011
1 1KA7805--- IC REGULATOR KA7805
CAUTION
“ ” is safety component, so it must be used the same component.
“ ® ” is recomendable part for stock.
All manuals and user guides at all-guides.com