Dahua DH-PFR5QI-E60 User manual

Visual Radar WEB
User’s Manual
V1.0.0
V1.0.0
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

User’s Manual
I
Foreword
General
This manual introduces the functions and operations of the Visual Radar (hereinafter referred to
as "the radar").
Model
DH-PFR5QI-E60, DH-PFR5QI-E60-PV.
Safety Instructions
The following categorized signal words with defined meaning might appear in the manual.
Signal Words
Meaning
WARNING
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, lower performance, or unpredictable
result.
TIPS
Provides methods to help you solve a problem or save you time.
NOTE
Provides additional information as the emphasis and supplement
to the text.
Revision History
Version
Revision Content
Release Time
V1.0.0
First release.
September 2020
About the Manual
The manual is for reference only. If there is inconsistency between the manual and the
actual product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply with the manual.
The manual would be updated according to the latest laws and regulations of related
jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our
official website. If there is inconsistency between paper manual and the electronic version,
the electronic version shall prevail.
All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the manual. Please
contact the customer service for the latest program and supplementary documentation.

User’s Manual
II
There still might be deviation in technical data, functions and operations description, or
errors in print. If there is any doubt or dispute, we reserve the right of final explanation.
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and the company names in the manual are the
properties of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem
occurring when using the device.
If there is any uncertainty or controversy, we reserve the right of final explanation.

User’s Manual
III
Important Safeguards and Warnings
This chapter introduces the contents covering proper handling of the product, hazard prevention,
and prevention of property damage. Read these contents carefully before using the product,
comply with them when using, and keep the manual well for future reference.
Environmental Requirement
As for ground within the monitoring area, hard ground like concrete ground is optimal. As
for ground covered by vegetation, vegetation height should be below 20 cm.
Make sure that there is no vegetation, buildings and vehicles within the monitoring area that
hinder the work of the radar.
Make sure that there is no electromagnetic interference like air conditioner exterior units
and transformers around where the radar is installed.
Transport, use and store the radar within permitted temperature range and humidity level.
Don’t put the radar in humid, dusty, extremely hot or cold, and intense electromagnetic
radiation places.
Pack the radar with packaging provided by its manufacturer or packaging with the same
quality before transporting it.
Don’t press hard, violently vibrate, and soak the radar when transporting, storing, and
installing it.
Power Source Requirement
Strictly comply with the local electric safety standards.
Make sure that the power supply is correct before operating the Illuminator.
The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited power Source
requirement according to IEC60950-1. Note that the power supply requirement is subject
to the device label.
Install easy-to-use device for power off before installing wiring, which is for emergent power
off when necessary.
Protect the power supply wires from treading and pressing with great force, especially wires
around the holes where the plug and outlet are threaded through.
Maintenance
Don’t spray paint, stick stickers, put colors and any other objects or smudges on the surface
of the radar; otherwise the performance of the radar will be greatly influenced.
Don’t disassemble the radar, for there are no components inside that can be repaired by
users. Disassembling may result in water leaks.
Clean the surface of the radar with a soft dry cloth. If there are stains, clean the surface
with a soft cloth dipped in neutral detergent, and then dry the surface. Don’t use detergent
with strong abrasiveness and volatile solvents like ethyl alcohol, benzene, and diluent;
otherwise the coating on the surface will be damaged and the performance of the radar will

User’s Manual
IV
be degraded.
Use accessories suggested by the manufacturer, and install and maintain the radar by
professional personnel.
Don’t provide two or more than two kinds of power supply modes; otherwise, the radar may
be damaged.

User’s Manual
V
Table of Contents
Foreword .................................................................................................................................................... I
Important Safeguards and Warnings .................................................................................................... III
1 Product Overview.................................................................................................................................. 1
General.......................................................................................................................................... 1
Functions....................................................................................................................................... 1
1.2.1 Basic Functions .................................................................................................................. 1
1.2.2 Intelligent Functions............................................................................................................ 2
2 Network Configuration.......................................................................................................................... 3
Device Initialization ....................................................................................................................... 3
Logging in to the Web Interface.................................................................................................... 5
Changing IP Address .................................................................................................................... 7
3 Basic Configuration .............................................................................................................................. 8
Live................................................................................................................................................ 8
3.1.1 Live Interface ...................................................................................................................... 8
3.1.2 Encode bar ......................................................................................................................... 8
3.1.3 Function Bar ....................................................................................................................... 9
3.1.4 Window Adjustment Bar ................................................................................................... 10
Playback...................................................................................................................................... 10
3.2.1 Playback Interface ............................................................................................................ 10
3.2.2 Playing Back Video or Picture .......................................................................................... 13
3.2.3 Clipping Video................................................................................................................... 14
3.2.4 Downloading Video or Picture .......................................................................................... 14
Camera........................................................................................................................................ 15
3.3.1 Configuring Camera Conditions ....................................................................................... 15
3.3.2 Configuring Video Parameters ......................................................................................... 23
3.3.3 Audio .................................................................................................................................30
Network ....................................................................................................................................... 32
3.4.1 TCP/IP .............................................................................................................................. 33
3.4.2 Port ................................................................................................................................... 36
3.4.3 PPPoE .............................................................................................................................. 38
3.4.4 DDNS................................................................................................................................ 39
3.4.5 SMTP (Email).................................................................................................................... 40
3.4.6 UPnP................................................................................................................................. 42
3.4.7 SNMP................................................................................................................................ 43
3.4.8 Bonjour.............................................................................................................................. 46
3.4.9 Multicast............................................................................................................................ 47
3.4.10 Auto Register .................................................................................................................. 47
3.4.11 802.1x ............................................................................................................................. 48
3.4.12 QoS................................................................................................................................. 49
3.4.13 Access Platform .............................................................................................................. 49
Storage........................................................................................................................................ 52
3.5.1 Configuring Storage Plan .................................................................................................52

User’s Manual
VI
3.5.2 Configuring Schedule ....................................................................................................... 52
3.5.3 Configuring Destination .................................................................................................... 54
System ........................................................................................................................................ 57
3.6.1 General ............................................................................................................................. 57
3.6.2 Date & Time ...................................................................................................................... 58
3.6.3 Account ............................................................................................................................. 59
3.6.4 Safety................................................................................................................................ 65
4 Configuring Radar............................................................................................................................... 75
Configuring Region Management ............................................................................................... 75
Configuring IVS Setup ................................................................................................................ 76
Configuring Device Attitude ........................................................................................................ 77
Configuring Linkage .................................................................................................................... 78
4.4.1 Auto Calibration ................................................................................................................ 78
4.4.2 Manual Calibration............................................................................................................ 79
5 Configuring Alarms and Abnormality ............................................................................................... 80
Configuring Alarm Linkage.......................................................................................................... 80
5.1.1 Alarm Linkage ................................................................................................................... 80
5.1.2 Subscribing Alarm............................................................................................................. 87
Configuring Relay-in ................................................................................................................... 89
Configuring Abnormality.............................................................................................................. 89
5.3.1 SD Card Abnormality ........................................................................................................ 90
5.3.2 Network Abnormality......................................................................................................... 90
5.3.3 Configuring Illegal Access ................................................................................................ 91
5.3.4 Configuring Security Exception ........................................................................................ 92
6 Maintenance......................................................................................................................................... 93
Requirements.............................................................................................................................. 93
Auto Maintenance ....................................................................................................................... 93
Resetting Password .................................................................................................................... 94
Backup and Default..................................................................................................................... 96
6.4.1 Import/Export .................................................................................................................... 96
6.4.2 Default............................................................................................................................... 97
Upgrade ...................................................................................................................................... 97
Information .................................................................................................................................. 98
6.6.1 Version .............................................................................................................................. 98
6.6.2 Log .................................................................................................................................... 99
6.6.3 Remote Log ....................................................................................................................100
6.6.4 Online User.....................................................................................................................101
7 Logout ................................................................................................................................................ 102
Cybersecurity Recommendations ................................................................................. 103

User’s Manual
1
1 Product Overview
General
There are mainly two connection methods between the radar and PC. See Figure 1-1 and Figure
1-2. The IP address of the radar is 192.168.1.108 by default. Use IP segment reasonably
according to actual network environment so that the radar can connect to network.
Connected by network cable
Connected through router or switch
Functions
1.2.1 Basic Functions
Real-time Monitoring
Live view.
When live viewing the image, you can enable audio, voice talk and connect monitoring
center for quick processing on the abnormalities.
Snapshot and triple snapshot to capture abnormalities of the monitoring image for

User’s Manual
2
subsequent view and processing.
Record abnormalities of monitoring image for subsequent view and processing.
Configure coding parameters, and adjust live view image.
Record
Auto record as schedule.
Play back recorded video and picture as needed.
Download recorded video and picture.
Alarm linked recording.
Account
Add, change and delete user group, and manage user authorities according to user group.
Add, change and delete user, and configure user authorities.
Change user password.
1.2.2 Intelligent Functions
Alarm
Set alarm prompt mode and tone according to alarm types.
View alarm prompt message.
Alarm Setting
The alarm is triggered when an external alarm input device inputs alarm.
When an alarm is triggered, the system performs linkages such as recording, alarm output,
sending email, snapshot, white light, and audio.
Abnormality
SD card error, network disconnection, illegal access, and security exception.
When SD card error or illegal access is detected, the system links alarm output and sending
email.
When network disconnection alarm is triggered, the system links recording and alarm
output.

User’s Manual
3
2 Network Configuration
Device Initialization
The radar needs to be initialized for the first-time use or after restoring to factory defaults.
Open IE browser, enter the IP address of the radar in the address bar, and then press
the Enter key. Device initialization
Set the password.
The password should consist of 8 to 32 non-blank characters and contain at least two
types of characters among upper case, lower case, number, and special characters
(excluding ' " ; : &). Make sure that the password and the confirmed password are the
same. Follow the password strength prompt to set a password with high security.
(Optional) Set the email address which is used to reset password.
We recommend you to enter the email address to guarantee normal use of the radar.
On the End-User License Agreement interface, select I have read and agree to all
terms check box, and then click Next.

User’s Manual
4
End-user license agreement
On the P2P interface, select P2P, and then click Next.
P2P
Select Auto-check for updates check box as needed, and then click Next to
complete initialization.

User’s Manual
5
Online Upgrade
Logging in to the Web Interface
You need to download and install the plug-in for the first-time login.
Enter username and password, and then click Login.
Login interface
The default username is admin, and the password is the one set during initialization.
If you enter the wrong password for continuously 5 times, the account will be locked
for 5 minutes. After the locked time ends, you can log in to the radar again.
You can set the allowed wrong password times in Setting > Event > Abnormality >
Illegal Access.
After successful login, download and install the plug-in according to the prompt.

User’s Manual
6
Installing the plug-in
After the plug-in is installed, the login interface is displayed automatically. Enter
username and password again, and then click Login. The Live interface is displayed.
Live view
Live: To view the real-time monitoring image.
Playback: Play back or download recorded video or image files. When playing back multi-
channel images or recordings, you can choose channel No. to play back.
Setting: Configure the basic and intelligent functions of the device. For the device with
multiple channels, through selecting channel No., you can set the parameters of different
channels.
Alarm: Subscribe and view alarm information.
Logout: Log out and go to login interface. The system will sleep automatically after idling
for a period of time.

User’s Manual
7
Changing IP Address
To ensure that the radar can be connected to the network, set an appropriate IP address.
On the web interface, select Setting > Network > TCP/IP.
Configure IP related parameters, and then click Save.
TCP/IP

User’s Manual
8
3 Basic Configuration
Live
This section introduces the layout of the interface and function configuration.
3.1.1 Live Interface
Live interface
Table 3-1 Live interface description
No.
Function
Description
1
Encode bar
Sets stream type and protocol.
2
Live view
Displays the real-time monitoring image, bitrate and resolution.
3
Function bar
Functions and operations in live viewing.
4
Window adjustment
bar
Adjustment operations in live viewing.
3.1.2 Encode bar
Operations on encode bar: Encode bar
Main Stream: It has large bit stream value and image with high resolution, but also requires
large bandwidth. This option can be used for storage and monitoring.
Sub Stream: It has small bit stream value and smooth image, and requires less bandwidth.
This option is normally used to replace main stream when bandwidth is not enough.
Protocol: You can select the network transmission protocol as needed, and the options are

User’s Manual
9
TCP, UDP and Multicast.
3.1.3 Function Bar
Function bar
Table 3-2 Description of function bar
No.
Function
Description
1
Relay-out
Displays alarm output state. Click to enable or disable alarm output.
Red: Alarm output enabled.
Grey: Alarm output disabled.
2
Warning
Light
: Off.
: On.
When an alarm rule (alarm, early warning, tripwire) is triggered, the
warning light is on. The light turns off when alarm is ended.
3
Alarm
Speaker
When an alarm is triggered, the icon turns yellow and the corresponding
audio is played. Click the icon to manually play the defined alarm audio.
Some models support recording or uploading alarm audio file.
For alarm audio settings, see "3.3.3.2 Configuring Alarm Audio" for
details.
４
Digital
Zoom
Click the icon, and then select an area in the video image to zoom in;
right-click on the image to restore the original size. In zoom-in state, drag
the image to check other areas.
5
Snapshot
Click to capture one picture of the current image, and it will be saved to
the configured storage path.
About viewing or changing storage path, see "3.3.2.4 Path".
6
Triple
Snapshot
Click the icon to capture three pictures of the current view (1 pic per
second), and they will be saved to the configured storage path.
About viewing or changing storage path, see "3.3.2.4 Path".
7
Record
Click to record video, and it will be saved to the configured storage path.

User’s Manual
10
No.
Function
Description
About viewing or changing storage path, see "3.3.2.4 Path".
8
Audio
Click to enable or disable audio output.
9
Talk
Click to enable or disable audio talk.
3.1.4 Window Adjustment Bar
This section introduces the adjustment of image. For details, see Table 3-3.
Adjusting device image
Table 3-3 Description of adjustment bar
No.
Function
Description
1
Original Size
Click to display the original video size.
2
Full Screen
Click to enter full screen mode; double-click or press Esc to
exit.
3
Rule Info
Click the icon, and then select Enable to display smart rules
and detection box; select Disable to stop the display. It is
enabled by default.
Playback
This section introduces playback related functions and operations, including video playback and
picture playback.
Before playing back video, ensure that you have inserted the SD card and configured record
plan, record storage method, record schedule and record control. For details, see "5.1.1.3.1
Configuring Record Plan" and "5.1.1.3.2 Configuring Record Control".
Before playing back picture, configure snapshot plan. For details, see "5.1.1.4.1 Configuring
Snapshot Plan".
3.2.1 Playback Interface
Click the Playback tab, and the Playback interface is displayed. The video playback and picture
playback interface layout are different, see Figure 3-5 and Figure 3-6. For details, see Table 3-
4.

User’s Manual
11
Video playback
Picture playback
Table 3-4 Playback interface description
No.
Function
Description
1
Rule Info
Click to display the smart rules and object detection box on the
live view interface. It is enabled by default.
Rules Info is valid only when you enabled the rule during recording.
2
Sound
Controls the sound during playback.

User’s Manual
12
No.
Function
Description
3
Play Control Bar
Controls playback.
: Click to play.
: Click to stop playing.
: Click to play the next frame.
You need to pause the playback before using play by frame.
: Click to slow down the playback.
: Click the icon to speed up the playback.
4
Progress Bar
Displays the record type and the corresponding period.
Click any point in the colored area, and the system will play back
the recorded video from the selected moment.
Each record type has its own color, see relations in Record Type.
5
Record/Snapshot
Type
Select the record type or snapshot type.
Record type includes General, Event, Alarm, and Manual.
Snapshot type includes General, Event, and Alarm.
6
Assistant
: Zoom video image of the selected area through two
operations.
Click the icon, and then select an area in the video image to
zoom in; right-click on the image to resume the original size.
Click the icon, and then scroll the mouse wheel in the video
image to zoom in or out.
: Click the icon to capture one picture of the current video,
and it will be saved to the configured storage path.
For viewing or changing storage path, see "3.3.2.4 Path".
7
Playback Video
You can select file type, data source and record date and downloaded
files.
8
Video Clip
Clip a certain recorded video and save it. For details, see "3.2.3
Clipping Video".
9
Time Format of
Progress Bar
Includes 4 time formats: , . , and
.

User’s Manual
13
3.2.2 Playing Back Video or Picture
This section introduces the operation of video and picture playback. This section takes video
playback as an example.
Select dav from the Record Type drop-down list when playing back videos.
Select jpg from Record Type drop-down list when playing back pictures. The data
source is SD card by default. File type selection
Select the record type in Record Type.
Specific event types (video)
Select the month and year of the video that you want to play.
Dates with blue color indicate there were videos recorded in those days.
Play video.
Click in the control bar. The system plays the recorded video of the selected
date (in chronological order).
Click any point in the colored area on the progress bar. The playback starts from
that moment. Progress bar
Click , the video files of the selected date would be listed. Enter the start
time and end time, and then click to search all files between the start time and
end time. Double-click the file in the list, and the system plays the video and
displays file size, starting time, and ending time.