EDUS30-900-R Specifications
RWEYQ-P Water Cooled Inverter Series 5
Notes:
1. 1 Indoor temp. : 80°FDB(27°CDB), 67°FWB(19.4°CWB)/inlet water temp. : 85°F(29.4°C)/outlet water temp. : 95°F (35°C)
Equivalent piping length : 25ft (7.5 m), level difference : 0ft.
2 Indoor temp.: 70°FDB(21°CDB), 60°FWB(15.5°CWB)/inlet water temp.: 70°F(21°C)/Equivalent piping length: 25ft (7.5 m), level difference : 0ft.
3 In the case of heat pump system, suction gas pipe is not used.
4 In the case of heat recovery system.
5 In the case of heat pump system.
2. This unit cannot be installed outdoors.
Install indoors (Machine room etc).
3. Hold ambient condition at 35~95°F(1.6~35°C), ~80%RH
Heat rejection from the casing : 0.71kW x 2
4. There are some cases where capacity decreases depending on operating states.
Model Name (Combination Unit) RWEYQ168PTJU
Model Name (Combination Unit) RWEYQ84PTJU+RWEYQ84PTJU
1 Cooling Capacity Btu / h 168,000
2 Heating Capacity Btu / h 189,000
Casing Color Ivory White (5Y7.5/1)
Dimensions: (H x W x D) in. (mm) (39-3/8 x 30-3/4 x 21-11/16) (1000.1 x 781.1 x 550.9) x 2
Heat Exchanger Stainless Steel Plate Type
Comp.
Type Hermetically Sealed Scroll Type
Piston Displacement m3/h 13.66 x 2
Number of Revolutions r.p.m 6,450 x 2
Motor Output x Number
of Units kW 4.0 x 2
Starting Method Soft Start
Connecting
Pipes
Liquid Pipe in. (mm) 5/8 (15.8) C1220T (Flare Connection) -Main Line-
Suction Gas Pipe in. (mm) 1-1/8 (28.6)C1220T (Brazing Connection) 3 -Main Line-
Discharge Gas Pipe in. (mm) (4) 7/8 (123.8) C1220T, (5) 1-1/8 (28.6). C1220T (Brazing Connection) -Main Line-
Water inlet 1-1/4 (31.7) FPT Female Thread
Water outlet 1-1/4 (31.7) FPT Female Thread
Drain outlet 1/2 (12.7) FPS Female Thread
Machine Weight (Mass) Lbs (kg) 330 + 330 lbs (149.7 + 149.7 kg)
Safety Devices High Pressure Switch, Inverter Overload Protector, Fusible Plugs
Capacity Control % 11~100
Refrigerant
Refrigerant Name R-410A
Charge Lbs (kg) 11.5+11.5 (5.2+5.2)
Control Electronic Expansion Valve
Refrigerator Oil Synthetic (Ether) Oil
Standard Accessories Installation Manual, Operation Manual, Connection Pipes, Clamps, Strainer, Conduit Mounting Plate
Drawing No. 4D066108