Daikin BRC2E52C7 User manual

BRC2E52C7
BRC3E52C7
WIRED REMOTE
CONTROLLER
OPERATION MANUAL
• Thank you for purchasing the wired remote controller.
• This manual describes safety precautions required for the use of the
product.
Read this manual carefully and be sure you understand the
information provided before attempting to use the product.
Keep this manual where it is readily accessible after reading it through.
If another user operates the product in the future, be sure to hand over
this manual to the new user.

Operation manual BRC2E52C7 / BRC3E52C7
14P368042-1 - 2014.02
Contents
Notices Safety Precautions ...................................................2
Items to be Strictly Observed ...................................3
Names and Functions...............................................7
Liquid Crystal Display...............................................9
Basic Operation Method Enable/disable the Menu/Enter and Cancel
button......................................................................12
Cool/Heat/Auto/Fan Operation...............................13
Program Dry Operation ..........................................16
Setback...................................................................17
Ventilation Operation..............................................18
Setting the Cooling/Heating Selection Eligibility.....19
Key Lock.................................................................22
Quick Reference of
Main Menu Items
The Main Menu Items Overview.............................23
Menu Manipulation Main Menu..............................................................27
Airow Direction......................................................28
Individual Air Direction............................................29
Quick Start..............................................................32
Ventilation...............................................................33
Energy Saving Options...........................................36
Schedule.................................................................44
Filter Auto Clean.....................................................49
Maintenance Information........................................50
Conguration ..........................................................51
Current Settings......................................................54
Clock & Calendar....................................................55
Language................................................................57
Maintenance Reset Filter Indication.............................................58
Maintenance of Unit and the LCD display..............59
Reference Information Error Code Display ................................................. 60
After-sale Service ...................................................61

BRC2E52C7 / BRC3E52C7 Operation manual
4P368042-1 - 2014.02 2
Safety Precautions
The original instructions are written in English. All other languages are translations of the original
instructions.
This appliance is not intended to be used by persons, including children, with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, unless they are supervised or
have been given instructions on how to use the appliance by a person responsible for their safety.
Childen should be supervised to ensure that they do not play with the appliance.
Please read these Safety Precautions carefully before installing the remote controller.
•This manual classifies the precautions into WARNING and CAUTION.
They both contain important information regarding safety. Be sure to follow all the precautions
below.
WARNING Failure to follow these instructions properly may result in personal
injury or loss of life.
CAUTION Failure to observe these instructions properly may result in property
damage or personal injury, which may be serious depending on the
circumstances.
•The following pictograms are used in this manual.
Never do. Always follow the instructions given.
Be sure to ground the unit. Absolutely keep wet hands away.
Absolutely keep water and moisture
away.
About Remote Controller
WARNING
• Do not install the remote controller by yourself.
Improper installation may result in electric shocks or re.
Consult your Daikin dealer.
• Do not modify or repair the remote controller.
This may result in electric shocks or re.
Consult your Daikin dealer.
• Do not relocate or reinstall the remote controller by yourself.
Improper installation may result in electric shocks or re.
Consult your Daikin dealer.
• Do not use ammable materials (e.g., hairspray or insecticide) near the
product.
Do not clean the product with organic solvents such as paint thinner.
The use of organic solvents may cause crack damage to the product, electric shocks or
re.

Operation manual BRC2E52C7 / BRC3E52C7
34P368042-1 - 2014.02
CAUTION
• Do not play with the unit or its remote controller.
Accidental operation by a child may result in impairment of bodily functions and harm
health.
• Never disassemble the remote controller.
Touching the interior parts may result in electric shocks or re.
Consult your Daikin dealer or authorized contractor for internal inspections and
adjustments.
• To avoid electric shocks, do not operate with wet hands.
• Do not wash the remote controller.
Doing so may cause electric leakage and result in electric shocks or re.
• Do not leave the remote controller wherever there is a risk of wetting.
If water gets into the remote controller there is a risk of electrical leakage and damage to
electronic components.
Indoor Unit and Outdoor Unit
WARNING
• Be aware that prolonged, direct exposure to cool or warm air from the air
conditioner or to air that is too cold or too warm can be harmful to your
physical condition and health.
• Do not place objects, including rods, your ngers, etc. in the air inlet or
outlet.
Injury may result due to contact with the air conditioner's highspeed fan blades.
• Contact professional personnel about attachment of accessories and be
sure to use only accessories specied by the manufacturer.
If a defect results from your own workmanship, it may result in water leaks, electric
shock or re.
• Do not use the product in atmospheres contaminated with oil vapor,
such as cooking oil or machine oil vapor.
Oil vapor may cause crack damage, electric shocks or re.
• Do not use the product in places with excessive oily smoke, such as
cooking rooms or in places with ammable gas, corrosive gas or metal
dust.
Using the product in such places may cause re or product failures.
• Beware of re in case of refrigerant leakage.
If the air conditioner is not operating correctly, i.e. not generating cool or warm air,
refrigerant leakage could be the cause. Consult your dealer for assistance. The
refrigerant within the air conditioner is safe and normally does not leak. However, in the
event of a leakage, contact with a naked burner, heater or cooker may result in
generation of noxious gas. Do not longer use the air conditioner until a qualied service
person conrms that the leakage has been repaired.
Items to be Strictly Observed

BRC2E52C7 / BRC3E52C7 Operation manual
4P368042-1 - 2014.02 4
Items to be Strictly Observed
WARNING
• In the case of using a load breaker provided with a fuse, make sure that
the capacity of the fuse is correct.
Use of an ordinary conductive wire may cause malfunctions or re.
• Do not use the power supply breaker to start or stop the air conditioner.
Otherwise, re or water leakage may result.
Furthermore, the fan will rotate abruptly if power failure compensation is enabled, which
may result in injury.
• Be sure to earth the unit.
Do not earth the unit to a utility pipe, lightning conductor or telephone earth lead.
Imperfect earthing may result in electric shocks or re. A high surge current from
lightning or other sources may cause damage to the air conditioner.
• When the air conditioner is malfunctioning (giving off a burning odour,
etc). turn off the power and contact your local dealer.
Continued operation under such circumstances may result in a failure, electric shocks or
re hazards.
• Consult your local dealer regarding what to do in case of refrigerant
leakage.
When the air conditioner is to be installed in a small room, it is necessary to take proper
measures so that the amount of any leaked refrigerant does not exceed the
concentration limit in the event of a leakage.
Otherwise, this may lead to an accident due to oxygen depletion.
• Be sure to install an earth leakage breaker.
Failure to install an earth leakage breaker may result in electric shocks or re.
• Consult the dealer if the air conditioner submerges owing to a natural
disaster such as a ood or typhoon.
Do not operate the air conditioner in that case or otherwise a malfunction, electric shock
or re may result.
• Be sure to use a dedicated power supply for the air conditioner.
The use of any other power supply may cause heat generation, re or product failures.

Operation manual BRC2E52C7 / BRC3E52C7
54P368042-1 - 2014.02
Items to be Strictly Observed
CAUTION
• After prolonged use, check the unit stand and its mounts for damage.
If left in a damaged condition, the unit may fall and cause injury.
• Do not allow a child to mount on the outdoor unit or avoid placing any
object on it.
Falling or tumbling may result in injury.
• Do not block air inlets nor outlets.
Impaired airow may result in insufcient performance or trouble.
• To avoid injury, do not touch the air inlet or aluminium ns of the unit.
• Do not remove the outdoor unit's fan guard.
The guard protects against the unit's high speed fan, which may cause injury.
• Do not place objects that are susceptible to moisture directly beneath
the indoor or outdoor units.
Under certain conditions, condensation on the main unit or refrigerant pipes, air lter dirt
or drain blockage may cause dripping, resulting in fouling or failure of the object
concerned.
• Do not place water containers (ower vases, etc). on the unit, as this
may result in electric shocks or re.
• Do not use the air conditioner for purposes other than those for which it
is intended.
Do not use the air conditioner for cooling precision instruments, food, plants, animals or
works of art as this may adversely affect the performance, quality and/or longevity of the
object concerned.
• Do not place appliances that produce naked ames in places exposed to
the airow from the unit as this may impair combustion of the burner.
• Do not place heaters directly below the unit as resulting heat can cause
deformation.
• Be sure that children, plants or animals are not exposed directly to
airow from the unit as adverse effects may ensue.
• Do not put ammable containers, such as spray cans, within 1m from the
blow-off mouth.
The containers may explode because the warm air output of the indoor or outdoor unit
will affect them.
• Do not install the air conditioner at any place where there is a danger of
ammable gas leakage.
In the event of a gas leakage, build-up of gas near the air conditioner may result in re
hazards.

BRC2E52C7 / BRC3E52C7 Operation manual
4P368042-1 - 2014.02 6
Items to be Strictly Observed
CAUTION
• Do not sit or stand on any unstable base at the time of operating or
maintaining the air conditioner.
The base may topple down and injury may occur.
• Do not touch the motor when replacing the lter.
The motor can be very hot which may result in burns.
• Do not wash the air conditioner with water as this may result in electric
shocks or re.
• Perform ventilation from time to time.
Be careful when using the air conditioner with other heating equipment.
Insufcient ventilation may result in oxygen deciency.
• Always stop the operation of the air conditioner and turn OFF the power
supply breaker when cleaning.
Failure to do so may result in an electric shock or injury.
• Do not wash the interior of the indoor and outdoor units by yourself.
Always consult your Daikin dealer.
The use of an incorrect washing method or incorrect detergent may damage the resin
parts of the indoor unit or cause water leakage.
Moreover, malfunctions, smoke generation or ignition may result if the electric parts or
the motor in the indoor unit come in contact with a detergent or water.
• Do not place objects in direct proximity of the outdoor unit and do not let
leaves and other debris accumulate around the unit.
Leaves are a hotbed for small animals which can enter the unit. Once in the unit, such
animals can cause malfunctions, smoke or re when making contact with electrical
parts.
• Fix the units securely.
If the units are not mounted securely, the units may fall or topple and result in personal
injury.
• Arrange the drain to ensure complete drainage.
If proper drainage from the outdoor drain pipe does not occur during air conditioner
operation, there could be a blockage due to dirt and debris build-up in the pipe.
This may result in water leakage from the indoor unit. Under these circumstances, stop
the air conditioner operation and consult your dealer for assistance.

Operation manual BRC2E52C7 / BRC3E52C7
74P368042-1 - 2014.02
2. Fan Speed button
3. Menu/Enter button
8. ON/OFF button
10. Cancel button
9. Operation lamp
11. LCD (with backlight)
4. Up button
5. Down button
6. Right button
7. Left button
1. Operation Mode
Selector button
Functions other than the basic operation items (i.e., ON/OFF,
operation mode selection, fan speed and temperature settings) are
set from the menu screen.
NOTE
• Do not install the remote controller in places exposed to direct sunlight.
Otherwise, the LCD may become discolored and nothing may be displayed.
• Do not pull or twist the remote controller cord.
Otherwise, the remote controller may malfunction.
• Do not press the buttons on the remote controller with objects with sharp ends.
Otherwise, the remote controller may be damaged or malfunction.
Names and Functions

BRC2E52C7 / BRC3E52C7 Operation manual
4P368042-1 - 2014.02 8
Names and Functions
1.Operation Mode Selector button
•Only available on the BRC2E
•Press this button to select the operation
mode of your preference. (See "Cool/Heat/
Auto/Fan Operation" on page 13)
•Available modes may vary with the
connected model.
2.Fan Speed button
•Used to change the fan speed. (See "Cool/
Heat/Auto/Fan Operation" on page 13)
•Available fan speeds may vary with the
connected model.
3.Menu/Enter button
•This button is disabled by default.
To enable, refer to "Enable/disable the
Menu/Enter and Cancel button" on
page 12.
•Used to display the Main Menu or enter the
selected item (See "The Main Menu Items
Overview." on page 23).
4.Up button
•Used to raise the set temperature.
•The next item on the upper side will be
highlighted.
(Keep pressing the button to cycle through
the values or items).
•Used to change the selected item.
5.Down button
•Used to lower the set temperature.
•The next item on the lower side will be
highlighted.
(Keep pressing the button to cycle through
the values or items).
•Used to change the selected item.
6.Right button
•Used to highlight the next items on the
right-hand side.
•The display contents are changed to the
next screen.
7.Left button
•Used to highlight the next items on the
left-hand side.
•The display contents are changed to the
previous screen.
8.ON/OFF button
•Press to start or stop the air conditioner.
9.Operation lamp (Green)
•This lamp lights up during operation.
•This lamp is not lit when the unit operation
is OFF.
•This lamp blinks if an error occurs.
10.Cancel button
•This button is disabled by default.
To enable, refer to "Enable/disable the
Menu/Enter and Cancel button" on
page 12.
•Used to return to the previous screen.
11.LCD (with backlight)
•The backlight will be lit for approximately
30 seconds when one of the buttons is
pressed.
•The actions linked to the buttons , except
for the ON/OFF button, are not carried out
when the backlight is not lit.
•When two remote controllers are used to
control a single indoor unit, the backlight of
the remote controller which is operated rst
will be lit.

Operation manual BRC2E52C7 / BRC3E52C7
94P368042-1 - 2014.02
Names and Functions
Liquid Crystal Display
•There are two display methods for the liquid crystal display (LCD) available. The
Standard display, which is used by default, and the Detailed display.
•To change the active display method, select the desired display method in the Display
Method screen (See "Display" on page 52).
•The displayed contents on the screen may vary with the operation mode of the
connected models. (E.g.: The following display will appear when the air conditioner is
in automatic heating operation).
Standard display
28°C
6.Ventilation/
purifying
5.Error
12.Under centralized control 13.Changeover under
control
3.Set temperature
display
4.Defrost/Hot start
7.Clean element
6.Clean filter
9.Timer enabled
14.Setback
2.Fan speed
1.Operation
mode
10.Emergency
operation
<Standard display example>
Detailed display
The clock and Detailed selection items appear on the Detailed
display in addition to the items appearing on the Standard display.
35
10
3. Setback temperature
display
<Detailed display example 1>
15.Clock (12/24 hours
real time clock)
16.Detailed selection
(room temperature
selected)
11.Low noise
operation/power
consumption
limitation/forced
thermo Off
(BACnet)

BRC2E52C7 / BRC3E52C7 Operation manual
4P368042-1 - 2014.02 10
Names and Functions
<Detailed display example 2>
15. Clock display
(with no clock settings)
16. Detailed selection
(with no detailed items
selected)
17. Timer problem
3. Set temperature
display
(Dual setpoint mode)
2.Fan speed
(with no fan speed
control function)
1.Operation mode
•Indicates the current operation mode.
Operation Mode
Cool Heat Vent Air Clean
Fan Dry Auto (Cool) Auto (Heat)
2.Fan speed
(See "Cool/Heat/Auto/Fan Operation" on
page 13)
•Indicates the fan speed that is set for the
air conditioner.
•The fan speed will not be displayed if the
air conditioner does not have the fan speed
control function.
3.Set/Setback temperature display
(See "Setback" on page 17)
•When the unit is turned ON, the
temperature that is set for the air
conditioner is displayed.
•When the unit is turned OFF and Setback
is disabled, the temperature that is set for
the air conditioner is displayed.
•When the unit is turned OFF and Setback
is enabled, the temperature that is set for
the setback function is displayed.
•By default, the display method is Single
Setpoint mode. To enable Dual Setpoint
mode, refer to the Installation manual.
4.Defrost/Hot start " "
(See "Hot start (VRV only)" on page 15).
•Indicates that Defrost/Hot start operation is
active.
•The Defrost/Hot start operation is only
possible when a Heat Reclaim Ventilation
(HRV) unit is connected. For details, refer
to the Operation Manual of the Heat
Reclaim Ventilation unit.
5.Error " "
(See "Error Code Display" on page 60)
•Indicates a unit error or warning.
6." Clean lter " "
(See "Reset Filter Indication" on
page 58)
•Indicates that the time to clean the lter
has come.
7."Clean element " "
(See "Reset Filter Indication" on
page 58)
•Indicates that the time to clean the element
has come.

Operation manual BRC2E52C7 / BRC3E52C7
11 4P368042-1 - 2014.02
Names and Functions
8. Ventilation/Purifying
(See "Ventilation Operation" on
page 18 and "Ventilation" on
page 33)
•The Ventilation mode icon." "
Indicate the current ventilation mode (HRV
only) (AUTOMATIC, ENERGY RECLAIM
VENTILATION, BYPASS).
•The Air Purifying ICON " "
This icon indicates that the air cleaning
option kit is operational.
9.Timer enabled " "
(See "OFF Timer" on page 42 and
"Schedule" on page 44).
•Indicates that the schedule timer or the
OFF timer is enabled.
10.Emergency operation " "
•If there is a problem with an outdoor
compressor, the unit is in emergency
operation. Refer to the service manual of
the outdoor unit or contact your local
dealer.
11.Low noise operation/power
consumption limitation/forced
thermo off (BACnet ) " "
•Indicates that the system is running under
low noise operation, under power
consumption limitation conditions or recieve
a forced thermo off command from a
BACnet interface. Refer to the service
manual of the outdoor unit or contact your
local dealer.
12.Under Centralized control " "
•Indicates that the air conditioner is under
the management of central control
equipment (optional accessories) and the
operation of the system through the remote
controller is prohibited.
13.Changeover under control " "
(VRV only) (See "Setting the Cooling/
Heating Selection Eligibility" on
page 19)
•Indicates that the changeover of the
cooling/heating eligibility is assigned to
another indoor unit or to the master remote
controller.
14.Setback " "
(See "Setback" on page 17).
•The setback icon ashes when the unit is
turned on under the setback control.
15.Clock (12/24 hours real time clock)
(See "Clock & Calendar" on page 55)
•Indicates that the clock is set.
•If the clock is not set, " -- : -- " will be
displayed.
16.Detailed selection
(See "Display Mode" on page 52)
•Is displayed when the detailed display
mode is selected.
•No detailed items are selected by default.
17.Timer problem " "
•Indicates that the clock needs to be set
again.
•The schedule timer function will not work
unless the clock is set again.

BRC2E52C7 / BRC3E52C7 Operation manual
4P368042-1 - 2014.02 12
1
Main Menu 1/2
SettingReturn
Airflow Direction
Individual Air Direction
Quick Start
Ventilation
Energy Saving Options
Schedule
• Display the Main Menu. (See "Manipulating
the Main Menu" on page 27).
• Press the (Up/Down) buttons to
select Schedule and press the Menu/Enter
button.
2 SettingReturn
NoYes
Schedule
Clock has not been set.
Would you like to set it now?
0:00
Wednesday
1Day 1Month 2014Year
Setting
Date & Time
Return
• Press the (Left/Right) buttons to
select Yes and press the Menu/Enter
button.
• The Date & Time screen will appear.
• Set the current year, month, day, and time.
(See "Clock & Calendar" on page 55).
Note
• Before setting the schedule, the clock must
be set.
• If the clock has not been set, a screen like
the one on the left will appear.
Operation Method
Remote Controller
Functions
Operation procedure
Operate the buttons according to
the procedure.
Button display
Displays the positions
of the buttons to be
operated.
Screen display
Screens that will be
displayed on the
remote controller.
Preparation
• For mechanical protection purposes, turn ON the system at least 6 hours before starting the
operation of the system.
• Do not turn OFF the system in season in order to ensure the smooth starting of the system.
Enable/disable the Menu/Enter and Cancel button
By default, the Menu/Enter and Cancel button are disabled.
Operation Method
1
2
22
2
1• To enable/disable the Menu/Enter and
Cancel button, keep the (Right) button
pressed in the Basic Screen.
2
2
22
2
1
• Press the 3 keys simultaneously while
keeping the (Right) button pressed.
Note
Don’t forget to disable the buttons again after installation or
maintenance is done.
Basic Operation Method

Operation manual BRC2E52C7 / BRC3E52C7
13 4P368042-1 - 2014.02
Basic Operation Method
(SkyAir and VRV)
Cool/Heat/Auto/Fan Operation
1 28°C
• Press the Operation Mode Selector button several
times until the desired mode (Cooling, Heating, Fan
Only, Dry or Auto) is selected.
Note
• Unavailable operation modes are not displayed.
• Only Cooling, Dry or Fan Only mode can be selected if the air
conditioner is a cooling-only model.
• Before making a mode change, make sure that Changeover
under control is not displayed on the remote controller.
The cooling or heating mode cannot be selected if the above is
displayed on the remote controller. See "Setting the Cooling/
Heating Selection Eligibility" on page 19 if the Changeover
under control icon blinks.
2 • Press the ON/OFF button.
The Operation lamp (green) will be lit and the air
conditioner will start operating.
3 28°C
• The set temperature will increase by 1°C
when the (Up) button is pressed and
decrease by 1°C when the (Down) button
is pressed.
Note
Temperature settings are not possible while in Dry or Fan Only
mode.
4 28°C
• To change the fan speed, press the Fan Speed
button.
Operation Method

BRC2E52C7 / BRC3E52C7 Operation manual
4P368042-1 - 2014.02 14
Basic Operation Method
High Medium-high
Auto Medium
Medium-low
Low
Note
• The air conditioner may be in automatic fan speed control for
mechanical protection purposes.
• The air conditioner may be in automatic fan speed control
according to the room temperature.
• The fan may stop operating, which is not a failure.
• It may take time until fan speed changes are actually carried
out.
• In Auto mode, the fan speed is adjusted automatically
according to the setpoint and indoor temperature
• In case of Fan Only mode the fan speed is high.
• Depending on the type of indoor unit, there are two fan speeds
(low and high), three fan speeds (low, medium and high) or ve
fan speeds available (low, medium-low, medium, medium-high,
high). Some indoor units also support automatic fan speed
5 • When the ON/OFF button is pressed again, the air
conditioner will stop operating and the Operation
lamp will turn OFF.
Note
• When the system is stopped while in heating operation, the fan
will continue to operate for approximately 1 minute in order to
eliminate the residual heat in the indoor unit.
• To prevent water leakage or system failure, do not turn OFF the
power soon after the air conditioner stops operating. Be sure to
wait at least 5 minutes so that the drain pump nishes
discharging the residual water from the indoor unit.
Characteristics of Cooling Operation
• If the cooling operation is used when the room temperature is too low,
frost forms on the heat exchanger of the indoor unit which can
decrease the cooling capacity. In this case, the air conditioner
automatically switches to defrost operation for a while.
During defrost operation, a low airow rate or a gentle wind is used to
prevent the discharge of melt water. (The remote controller displays the
fan speed that is set).
• When the outdoor air temperature is high, it takes some time until the
room temperature reaches the set temperature.

Operation manual BRC2E52C7 / BRC3E52C7
15 4P368042-1 - 2014.02
Basic Operation Method
Characteristics of Heating Operation
Starting operation • Heating operation generally requires a longer time to attain the set
temperature compared with cooling operation.
It is recommended to start operating the air conditioner in advance by
using the timer.
Perform the following operation in order to prevent the degradation of the
heating capability or cold drafts.
Defrost operation • The air conditioner will automatically go into defrost operation to
prevent frost accumulation at the outdoor unit which results in loss of
the heating capacity.
• The indoor unit fan will stop, and " " (Defrost/Hot start) will be
displayed on the remote controller.
• The air conditioner will return to normal operation after approximately
6 to 8 minutes (Max 10 minutes).
Hot start (VRV
only)
• When the air conditioner goes into heating operation or defrost
operation, the indoor unit fan will stop in order to prevent a cold draft.
(In that case, " " (Defrost/Hot start) will be displayed on the
remote controller).
Outdoor
temperature and
heating capability
• The heating capacity of the air conditioner will drop when the outdoor
temperature decreases.
If the heating effect is insufcient, it is recommended to use another
heating appliance in combination with the air conditioner. (When a
combustion appliance is used, ventilate the room regularly).
Do not use the heating appliance in places where the heating
appliance is exposed to the airow of the air conditioner.
• The air conditioner is a hot air circulation type. Therefore, it takes
some time to warm up the room after the air conditioner starts
operating.
The indoor fan will automatically operate until the indoor temperature
of the system rises to a certain level.
• If hot air stays around the ceiling and your feet feel cold, a circulator is
recommended.
For details, consult your Daikin dealer.

BRC2E52C7 / BRC3E52C7 Operation manual
4P368042-1 - 2014.02 16
Basic Operation Method
Program Dry Operation
Preparation
• For mechanical protection purposes, turn ON the air conditioner at least 6 hours before
starting the operation of the air conditioner.
• Do not turn OFF the air conditioner in season in order to ensure the smooth starting of the air
conditioner.
• The dry mode may not be selected if the remote controller has no eligibility to select cooling/
heating mode (See "Setting the Cooling/Heating Selection Eligibility" on page 19 for
details).
1 • Press the Operation Mode Selector button several
times until Dry mode is selected.
Note
Dry mode may not be available depending on the type of indoor
unit.
2 • Press the ON/OFF button.
The Operation lamp will be lit and the air
conditioner will start operating.
Note
The air conditioner is in automatic temperature and fan speed
control. Therefore, the temperature or fan speed cannot be
changed while the air conditioner is in operation.
3 • To set the airow direction, see "Airow Direction" on page 28.
4 • When the ON/OFF button is pressed again, the air
conditioner will stop operating and the Operation
lamp will turn OFF
Note
To prevent water leakage or system failure, do not turn OFF the
power soon after the air conditioner stops operating. Be sure to
wait at least 5 minutes so that the drain pump nishes discharging
the residual water from the indoor unit.
Operation Method

Operation manual BRC2E52C7 / BRC3E52C7
17 4P368042-1 - 2014.02
Basic Operation Method
Characteristics of Dry Operation
In Dry operation, the air humidity will be lowered by intermittently
turning the air conditioner ON in cooling and OFF again to minimize
the temperature decrease.
Note
• The temperature and fan speed are controlled automatically and
cannot be controlled by the remote controller.
• Dry operation will not function if the room temperature is too low.
Setback
The Setback function will maintain the room temperature in a specic range when the remote
controller is turned OFF. This is done by temporarily starting the air conditioner that was previously
turned OFF by the user, the schedule function or the OFF timer.
OFF
Heating
Operation
Cooling Operation
10°C 12°C
33°C 35°C
For example:
[ Setback setpoint temperature: cool 35°C, heat 10°C ]
[ Recovery differential: cool -2°C, heat +2°C ]
•If the room temperature drops below 10°C, heating is started automatically. If after half an hour
the temperature increases to 12°C or above, the controller returns to its original state.
•If the room temperature goes above 35°C, cooling is started automatically. If after half an hour
the temperature drops to 33°C or below, the controller returns to its original state.
Note
• This function is enabled by default. This function can only be enabled/disabled in the Energy
Saving List (See "Energy Saving Options" on page 36).
• The differential can be adjusted in the Setback Condition menu (See "Setback Condition" on
page 38).
• The setback temperature can be set while the unit is turned off on the Basic Screen or set in the
schedule.
• Setback will turn the unit ON for at least 30 minutes unless the setback temperature setpoint is
changed or the unit is turned ON with the ON/OFF button.
• When setback turns the air conditioner ON while in Auto mode, the remote controller switches to
Cooling or Heating only, depending on what is appropriate, and only the respective setback
temperature setpoint is shown.

BRC2E52C7 / BRC3E52C7 Operation manual
4P368042-1 - 2014.02 18
Basic Operation Method
Operation Method
Setback should not be enabled when a centralized controller is connected.
1 35°C
The setback icon " " ashes when the unit is turned ON under
the setback control.
The fan speed cannot be changed when setback is active and as
a result, the fan speed is not visible.
Ventilation Operation
Preparation
• For mechanical protection purposes, turn ON the air conditioner at least 6 hours before
starting the operation of the system.
• Do not turn OFF the air conditioner in season in order to ensure the smooth starting of the air
conditioner.
• Press the Operation Mode Selector button several times until the ventilation mode is
selected.
1 • The Ventilation mode is used on Heat Reclaim
Ventilation (HRV) units for when cooling or heating
is unnecessary.
2 • The Ventilation mode can be changed in the Main Menu
(See "Ventilation Mode" on page 34).
Note
Ventilation modes: Auto, Energy Reclaim Ventilation and Bypass
3 • The Ventilation rate can be changed in the Main Menu
(See "Ventilation Rate" on page 33).
Note
Ventilation rates: Low or High
(HRV only)
Operation Method

Operation manual BRC2E52C7 / BRC3E52C7
19 4P368042-1 - 2014.02
Basic Operation Method
4 • Press the ON/OFF button.
The Operation lamp will be lit and the Heat
Reclaim Ventilation unit will start operating.
5 • When the ON/OFF button is pressed again the
Heat Reclaim Ventilation will stop operating and
the Operation lamp will turn OFF.
Setting the Cooling/Heating Selection Eligibility
(VRV only)
Setting Changes
See "Cool/Heat Selection Eligibility" on page 21 for an explanation of the
cooling/heating selection eglibility.
1 28°C
28°C
• Press the Operation Mode Selector button on the
remote controller for at least 4 seconds. (During
backlight lit)
The remote controller will not display " "
(Changeover under control) if a cooling/heating
selection eligibility is granted to the remote
controller.
• The icon " " (Changeover under control) on each remote
controller of indoor units connected to the same outdoor unit or
BS (Branch Selection) box will start blinking.
• Set a cooling/heating selection eligibility as explained below.
Note
• Ventilation mode changes are possible regardless of the cooling/
heating selection eligibility.
• If a cooling/heating selection eligibility is set in the "cooling/
heating selection remote controller" ( ), the other remote
controllers will display " " (Changeover under control). In this
case, the operation mode cannot be changed to respectively
cooling or heating when heating or cooling is set on the "cooling
or heating selection remote controller".
Refer to the Operation Manual provided to the outdoor unit for
the details on the "cooling/heating selection remote controller".