Daikin VAM-J8 Series User manual

Installer and user reference guide
Heat reclaim ventilation unit
VAM350J8VEB
VAM500J8VEB
VAM650J8VEB
VAM800J8VEB
VAM1000J8VEB
VAM1500J8VEB
VAM2000J8VEB

Table of contents
Installer and user reference guide
2
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
Table of contents
1 About the documentation 5
1.1 About this document ...................................................................................................................................................... 5
1.2 Meaning of warnings and symbols................................................................................................................................. 6
2 General safety precautions 8
2.1 For the installer............................................................................................................................................................... 8
2.1.1 General ........................................................................................................................................................... 8
2.1.2 Installation site ............................................................................................................................................... 9
2.1.3 Electrical ......................................................................................................................................................... 9
3 Specific installer safety instructions 12
For the user 16
4 User safety instructions 17
4.1 General............................................................................................................................................................................ 17
4.2 Instructions for safe operation ....................................................................................................................................... 18
5 User interface 20
6 Operation 21
6.1 Before operation............................................................................................................................................................. 21
6.2 Operation range.............................................................................................................................................................. 21
6.3 Ventilation mode ............................................................................................................................................................ 21
6.3.1 To set the ventilation mode ........................................................................................................................... 22
6.4 Ventilation rate ............................................................................................................................................................... 22
6.4.1 To set the ventilation rate.............................................................................................................................. 22
7 Energy saving and optimum operation 24
8 Maintenance and service 25
8.1 Maintenance of the air filter........................................................................................................................................... 25
8.2 Maintenance of the heat exchange element................................................................................................................. 27
9 Troubleshooting 28
10 Relocation 30
11 Disposal 31
For the installer 32
12 About the box 33
12.1 Overview: About the box ................................................................................................................................................ 33
12.2 Heat reclaim ventilation unit .......................................................................................................................................... 34
12.2.1 To unpack the heat reclaim ventilation unit.................................................................................................. 34
12.2.2 To remove the accessories............................................................................................................................. 36
12.2.3 To handle the heat reclaim ventilation unit .................................................................................................. 37
13 About the units and options 38
13.1 Overview: About the units and options.......................................................................................................................... 38
13.2 Identification ................................................................................................................................................................... 38
13.2.1 Identification label: Heat reclaim ventilation unit ......................................................................................... 38
13.3 About the heat reclaim ventilation unit ......................................................................................................................... 39
13.3.1 About the EKVDX option ................................................................................................................................ 39
13.4 Combining units and options.......................................................................................................................................... 40
13.4.1 Possible options for the heat reclaim ventilation unit .................................................................................. 40
14 Unit installation 42
14.1 Preparing the installation site......................................................................................................................................... 42
14.1.1 Installation site requirements for the heat reclaim ventilation unit............................................................. 42
14.2 Preparing the unit ........................................................................................................................................................... 42
14.2.1 To install the optional adapter PCB................................................................................................................ 43
14.2.2 To install the duct flanges .............................................................................................................................. 45
14.2.3 To install the EKVDX option............................................................................................................................ 45
14.3 Unit orientation............................................................................................................................................................... 46

Table of contents
Installer and user reference guide
3
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
14.4 To install the anchor bolts .............................................................................................................................................. 47
14.5 Duct connections ............................................................................................................................................................ 48
15 Electrical installation 50
15.1 About connecting the electrical wiring .......................................................................................................................... 50
15.1.1 Precautions when connecting the electrical wiring....................................................................................... 50
15.1.2 Guidelines when connecting the electrical wiring......................................................................................... 51
15.1.3 Wiring connection .......................................................................................................................................... 51
15.1.4 Component electrical specifications.............................................................................................................. 52
15.1.5 Specifications for field supplied fuses and wires........................................................................................... 53
15.2 Opening the switch box .................................................................................................................................................. 54
15.3 Electrical connections for additional field supplied damper ......................................................................................... 61
15.4 To connect the electrical wiring ..................................................................................................................................... 61
15.5 To connect the monitoring output................................................................................................................................. 63
16 System configuration 64
16.1 About control systems .................................................................................................................................................... 64
16.2 Independent system ....................................................................................................................................................... 65
16.3 Linked operation control system.................................................................................................................................... 65
16.4 Central control system.................................................................................................................................................... 66
16.5 EKVDX option .................................................................................................................................................................. 67
17 Configuration 69
17.1 To change settings .......................................................................................................................................................... 69
Case 1: Change settings with BRC1E53.......................................................................................................... 69
Case 2: Change settings with BRC301B61 ..................................................................................................... 70
Case 3: Change settings with BRC1H ............................................................................................................. 71
17.2 Field settings ................................................................................................................................................................... 72
17.3 Settings for all configurations......................................................................................................................................... 74
17.3.1 About setting 19(29)-0-04 and 19(29)-0-05 .................................................................................................. 75
17.3.2 Independent system....................................................................................................................................... 75
17.3.3 1-group linked-control system ....................................................................................................................... 76
17.3.4 Linked control with more than 2 groups ....................................................................................................... 76
17.3.5 Direct duct connection................................................................................................................................... 77
17.3.6 Central control system ................................................................................................................................... 78
17.3.7 EKVDX option - extra settings......................................................................................................................... 81
17.4 About the controller ....................................................................................................................................................... 82
17.4.1 BRC1E53 controller......................................................................................................................................... 82
17.4.2 BRC301B61 controller .................................................................................................................................... 85
17.4.3 BRC1H controller ............................................................................................................................................ 87
17.5 Detailed explanation of settings ..................................................................................................................................... 88
17.5.1 About fresh-up operation............................................................................................................................... 88
17.5.2 About the external damper operation........................................................................................................... 89
17.5.3 About the CO₂ sensor ..................................................................................................................................... 90
17.5.4 About nighttime free cooling operation ........................................................................................................ 94
17.5.5 About the precool and preheat function....................................................................................................... 95
17.5.6 About preventing a feeling of draft................................................................................................................ 95
17.5.7 About 24-hour ventilation.............................................................................................................................. 95
17.5.8 About the ultra-low setting............................................................................................................................ 96
17.5.9 About the electrical heater operation ........................................................................................................... 96
17.5.10 About external linkage input.......................................................................................................................... 96
17.5.11 About filter contamination check .................................................................................................................. 96
18 Commissioning 97
18.1 Overview: Commissioning .............................................................................................................................................. 97
18.2 Checklist before commissioning ..................................................................................................................................... 97
18.3 Checklist during commissioning ..................................................................................................................................... 98
18.3.1 About the test run .......................................................................................................................................... 98
19 Hand-over to the user 99
20 Maintenance and service 100
20.1 Overview: Maintenance and service .............................................................................................................................. 100
20.2 Maintenance safety precautions .................................................................................................................................... 100
20.2.1 To prevent electrical hazards ......................................................................................................................... 100
20.3 Checklist for maintenance of the heat reclaim ventilation unit .................................................................................... 101
21 Troubleshooting 102
21.1 Overview: Troubleshooting ............................................................................................................................................ 102
21.2 Precautions when troubleshooting ................................................................................................................................ 102
21.3 Solving problems based on error codes ......................................................................................................................... 102

Table of contents
Installer and user reference guide
4
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
21.3.1 Error codes: Overview .................................................................................................................................... 102
22 Disposal 104
23 Technical data 105
23.1 Wiring diagram................................................................................................................................................................ 105
23.2 Service space................................................................................................................................................................... 108
24 Glossary 109

1 | About the documentation
Installer and user reference guide
5
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
1 About the documentation
In this chapter
1.1 About this document.............................................................................................................................................................. 5
1.2 Meaning of warnings and symbols......................................................................................................................................... 6
1.1 About this document
INFORMATION
Make sure that the user has the printed documentation and ask him/her to keep it
for future reference.
Target audience
Authorised installers + end users
INFORMATION
This appliance is intended to be used by expert or trained users in shops, in light
industry and on farms, or for commercial use by lay persons.
Documentation set
This document is part of a documentation set. The complete set consists of:
▪General safety precautions:
-Safety instructions that you MUST read before installing
-Format: Paper (in the accessory bag of the heat reclaim ventilation unit)
▪Heat reclaim ventilation unit installation and operation manual:
-Installation and operation instructions
-Format: Paper (in the accessory bag of the heat reclaim ventilation unit)
▪Installer and user reference guide:
-Preparation of the installation, good practices, reference data,…
-Detailed step-by-step instructions and background information for basic and
advanced usage
-Format: Digital files on http://www.daikineurope.com/support-and-manuals/
product-information/
Latest revisions of the supplied documentation may be available on the regional
Daikin website or via your dealer.
The original documentation is written in English. All other languages are
translations.
Technical engineering data
▪A subset of the latest technical data is available on the regional Daikin website
(publicly accessible).
▪The full set of latest technical data is available on the Daikin Business Portal
(authentication required).

1 | About the documentation
Installer and user reference guide
6
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
1.2 Meaning of warnings and symbols
DANGER
Indicates a situation that results in death or serious injury.
DANGER: RISK OF ELECTROCUTION
Indicates a situation that could result in electrocution.
DANGER: RISK OF BURNING/SCALDING
Indicates a situation that could result in burning/scalding because of extreme hot or
cold temperatures.
DANGER: RISK OF EXPLOSION
Indicates a situation that could result in explosion.
WARNING
Indicates a situation that could result in death or serious injury.
WARNING: FLAMMABLE MATERIAL
CAUTION
Indicates a situation that could result in minor or moderate injury.
NOTICE
Indicates a situation that could result in equipment or property damage.
INFORMATION
Indicates useful tips or additional information.
Symbols used on the unit:
Symbol Explanation
Before installation, read the installation and operation
manual, and the wiring instruction sheet.
Before performing maintenance and service tasks, read the
service manual.
For more information, see the installer and user reference
guide.
The unit contains rotating parts. Be careful when servicing or
inspecting the unit.
Symbols used in the documentation:
Symbol Explanation
Indicates a figure title or a reference to it.
Example: " 1–3 Figure title" means "Figure 3 in chapter 1".

1 | About the documentation
Installer and user reference guide
7
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
Symbol Explanation
Indicates a table title or a reference to it.
Example: " 1–3 Table title" means "Table 3 in chapter 1".

2 | General safety precautions
Installer and user reference guide
8
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
2 General safety precautions
In this chapter
2.1 For the installer....................................................................................................................................................................... 8
2.1.1 General ................................................................................................................................................................... 8
2.1.2 Installation site ....................................................................................................................................................... 9
2.1.3 Electrical ................................................................................................................................................................. 9
2.1 For the installer
2.1.1 General
If you are NOT sure how to install or operate the unit, contact your dealer.
DANGER: RISK OF BURNING/SCALDING
▪Do NOT touch the refrigerant piping, water piping or internal parts during and
immediately after operation. It could be too hot or too cold. Give it time to return
to normal temperature. If you MUST touch it, wear protective gloves.
▪Do NOT touch any accidental leaking refrigerant.
WARNING
Improper installation or attachment of equipment or accessories could result in
electrical shock, short-circuit, leaks, fire or other damage to the equipment. ONLY
use accessories, optional equipment and spare parts made or approved by Daikin.
WARNING
Make sure installation, testing and applied materials comply with applicable
legislation (on top of the instructions described in the Daikin documentation).
CAUTION
Wear adequate personal protective equipment (protective gloves, safety glasses,…)
when installing, maintaining or servicing the system.
WARNING
Tear apart and throw away plastic packaging bags so that nobody, especially
children, can play with them. Possible risk: suffocation.
WARNING
Provide adequate measures to prevent that the unit can be used as a shelter by small
animals. Small animals that make contact with electrical parts can cause
malfunctions, smoke or fire.
CAUTION
Do NOT touch the air inlet or aluminium fins of the unit.
CAUTION
▪Do NOT place any objects or equipment on top of the unit.
▪Do NOT sit, climb or stand on the unit.

2 | General safety precautions
Installer and user reference guide
9
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
In accordance with the applicable legislation, it might be necessary to provide a
logbook with the product containing at least: information on maintenance, repair
work, results of tests, stand-by periods,…
Also, at least, following information MUST be provided at an accessible place at the
product:
▪Instructions for shutting down the system in case of an emergency
▪Name and address of fire department, police and hospital
▪Name, address and day and night telephone numbers for obtaining service
In Europe, EN378 provides the necessary guidance for this logbook.
2.1.2 Installation site
▪Provide sufficient space around the unit for servicing and air circulation.
▪Make sure the installation site withstands the weight and vibration of the unit.
▪Make sure the area is well ventilated. Do NOT block any ventilation openings.
▪Make sure the unit is level.
Do NOT install the unit in the following places:
▪In potentially explosive atmospheres.
▪In places where there is machinery that emits electromagnetic waves.
Electromagnetic waves may disturb the control system, and cause malfunction of
the equipment.
▪In places where there is a risk of fire due to the leakage of flammable gases
(example: thinner or gasoline), carbon fibre, ignitable dust.
▪In places where corrosive gas (example: sulphurous acid gas) is produced.
Corrosion of copper pipes or soldered parts may cause the refrigerant to leak.
2.1.3 Electrical
DANGER: RISK OF ELECTROCUTION
▪Turn OFF all power supply before removing the switch box cover, connecting
electrical wiring or touching electrical parts.
▪Disconnect the power supply for more than 10minutes, and measure the voltage
at the terminals of main circuit capacitors or electrical components before
servicing. The voltage MUST be less than 50VDC before you can touch electrical
components. For the location of the terminals, see the wiring diagram.
▪Do NOT touch electrical components with wet hands.
▪Do NOT leave the unit unattended when the service cover is removed.
WARNING
If NOT factory installed, a main switch or other means for disconnection, having a
contact separation in all poles providing full disconnection under overvoltage
categoryIII condition, MUST be installed in the fixed wiring.

2 | General safety precautions
Installer and user reference guide
10
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
WARNING
▪ONLY use copper wires.
▪Make sure the field wiring complies with the applicable legislation.
▪All field wiring MUST be performed in accordance with the wiring diagram
supplied with the product.
▪NEVER squeeze bundled cables and make sure they do NOT come in contact with
the piping and sharp edges. Make sure no external pressure is applied to the
terminal connections.
▪Make sure to install earth wiring. Do NOT earth the unit to a utility pipe, surge
absorber, or telephone earth. Incomplete earth may cause electrical shock.
▪Make sure to use a dedicated power circuit. NEVER use a power supply shared by
another appliance.
▪Make sure to install the required fuses or circuit breakers.
▪Make sure to install an earth leakage protector. Failure to do so may cause
electrical shock or fire.
▪When installing the earth leakage protector, make sure it is compatible with the
inverter (resistant to high frequency electric noise) to avoid unnecessary opening
of the earth leakage protector.
CAUTION
▪When connecting the power supply: connect the earth cable first, before making
the current-carrying connections.
▪When disconnecting the power supply: disconnect the current-carrying cables
first, before separating the earth connection.
▪The length of the conductors between the power supply stress relief and the
terminal block itself MUST be as such that the current-carrying wires are
tautened before the earth wire is in case the power supply is pulled loose from
the stress relief.
NOTICE
Precautions when laying power wiring:
▪Do NOT connect wiring of different thicknesses to the power terminal block (slack
in the power wiring may cause abnormal heat).
▪When connecting wiring which is the same thickness, do as shown in the figure
above.
▪For wiring, use the designated power wire and connect firmly, then secure to
prevent outside pressure being exerted on the terminal board.
▪Use an appropriate screwdriver for tightening the terminal screws. A screwdriver
with a small head will damage the head and make proper tightening impossible.
▪Over-tightening the terminal screws may break them.
WARNING
▪After finishing the electrical work, confirm that each electrical component and
terminal inside the electrical components box is connected securely.
▪Make sure all covers are closed before starting up the unit.

2 | General safety precautions
Installer and user reference guide
11
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
NOTICE
ONLY applicable if the power supply is three‑phase, and the compressor has an ON/
OFF starting method.
If there exists the possibility of reversed phase after a momentary black out and the
power goes ON and OFF while the product is operating, attach a reversed phase
protection circuit locally. Running the product in reversed phase can break the
compressor and other parts.

3 | Specific installer safety instructions
Installer and user reference guide
12
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
3 Specific installer safety instructions
Always observe the following safety instructions and regulations.
Unit installation (see "14Unit installation"[ 4
42])
WARNING
Fixing method of the heat reclaim ventilation unit MUST be in accordance with the
instructions from this manual. See "14.4To install the anchor bolts"[447].
WARNING
The appliance shall be stored in a room without continuously operating ignition
sources (example: open flames, an operating gas appliance or an operating electric
heater).
CAUTION
Appliance NOT accessible to the general public, install it in a secured area, protected
from easy access.
This unit is suitable for installation in a commercial and light industrial environment.
WARNING
When connected to an EKVDX, the height of the air extraction opening from the
room MUST be be equal or below the refrigerant release point.
CAUTION
▪The appliance is designed to be a built-in appliance. It may NOT be accessible to
the general public. Adequate measures have to be taken to prevent access by
other than qualified persons.
▪Check if the installation location can support the unit's weight. Poor installation is
hazardous. It can also cause vibrations or unusual operating noise.
▪Provide sufficient service space and inspection holes. Inspection holes are needed
for the air filters, the heat exchange elements and the fans.
▪Do NOT install the unit so that it is in contact with a ceiling or wall, this may cause
vibration.
CAUTION
▪A minimum length of 1.5m is required for the outdoor air, exhaust air and return
air ducting. If the ducting is shorter, or if no ducting is installed, then you MUST
install grilles in the duct openings or the openings of the unit.
▪Make sure no wind can blow in the ducting.
WARNING
When combined with an EKVDX unit, do NOT install operating ignition sources
(example: open flames, an operating gas appliance or an operating electric heater) in
the duct work.
Electrical installation (see "15Electrical installation"[ 4
50])
WARNING
Electrical wiring connection method MUST be in accordance with the instructions
from this manual. See "15Electrical installation"[450].

3 | Specific installer safety instructions
Installer and user reference guide
13
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
WARNING
▪All wiring MUST be performed by an authorised electrician and MUST comply
with the applicable legislation.
▪Make electrical connections to the fixed wiring.
▪All components procured on-site and all electrical construction MUST comply
with the applicable legislation.
WARNING
▪After finishing the electrical work, confirm that each electrical component and
terminal inside the electrical components box is connected securely.
▪Make sure all covers are closed before starting up the unit.
WARNING
If NOT factory installed, a main switch or other means for disconnection, having a
contact separation in all poles providing full disconnection under overvoltage
categoryIII condition, MUST be installed in the fixed wiring.
WARNING
▪ONLY use copper wires.
▪Make sure the field wiring complies with the applicable legislation.
▪All field wiring MUST be performed in accordance with the wiring diagram
supplied with the product.
▪NEVER squeeze bundled cables and make sure they do NOT come into contact
with the piping and sharp edges. Make sure no external pressure is applied to the
terminal connections.
▪Make sure to install earth wiring. Do NOT earth the unit to a utility pipe, surge
absorber, or telephone earth. Incomplete earthing may cause electrical shock.
▪Make sure to install the required fuses or circuit breakers.
▪Make sure to install an earth leakage protector. Failure to do so may cause
electrical shock or fire.
CAUTION
Before opening the cover, be sure to turn off the power switches of the main units
and other devices connected to the main units.
▪Remove the screws that secure the cover and open the switch box.
▪Secure the power supply cable and the control wire with a tie wrap, as shown in
the figures.
WARNING
If a gap is present at the cable entry, wrap the cable (or cables) with the sealing
material from the accessory bag.
This will prevent small objects (such as children's fingers, ... etc.) as well as fluid
droplets from entering the unit.
+
+
=
=

3 | Specific installer safety instructions
Installer and user reference guide
14
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
WARNING
Prevent hazards due to inadvertent resetting of the thermal cut-out: power to this
appliance MUST NOT be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly turned ON and OFF by the utility.
WARNING
▪When carrying out an inspection on the switch box of the unit, ALWAYS make
sure that the unit is disconnected from the mains. Turn off the respective circuit
breaker.
▪When a safety device was activated, stop the unit and find out why the safety
device was activated before resetting it. NEVER shunt safety devices or change
their values to a value other than the factory default setting. If you are unable to
find the cause of the problem, call your dealer.
WARNING
▪If the power supply has a missing or wrong N-phase, equipment might break
down.
▪Establish proper earthing. Do NOT earth the unit to a utility pipe, surge absorber,
or telephone earth. Incomplete earthing may cause electrical shock.
▪Install the required fuses or circuit breakers.
▪Secure the electrical wiring with cable ties so that the cables do NOT come in
contact with sharp edges or piping, particularly on the high-pressure side.
▪Do NOT use taped wires, stranded conductor wires, extension cords, or
connections from a star system. They can cause overheating, electrical shock or
fire.
▪Do NOT install a phase advancing capacitor, because this unit is equipped with an
inverter. A phase advancing capacitor will reduce performance and may cause
accidents.
WARNING
ALWAYS use multicore cable for power supply cables.
WARNING
Use an all-pole disconnection type breaker with at least 3mm between the contact
point gaps that provide full disconnection under overvoltage category III.
CAUTION
In case of combination with an EKVDX option using R32 refrigerant, do NOT turn off
the circuit breaker, unless you smell something burning, or during a short repair
period, inspection, or cleaning of the unit. Otherwise, R32 refrigerant leakage
CANNOT be detected.
WARNING
If the supply cord is damaged, it MUST be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.

3 | Specific installer safety instructions
Installer and user reference guide
15
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
Commissioning (see "18Commissioning"[ 4
97])
WARNING
Commissioning method MUST be in accordance with the instructions from this
manual. See "18Commissioning"[497].

For the user
Installer and user reference guide
16
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
For the user

4 | User safety instructions
Installer and user reference guide
17
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
4 User safety instructions
Always observe the following safety instructions and regulations.
In this chapter
4.1 General.................................................................................................................................................................................... 17
4.2 Instructions for safe operation............................................................................................................................................... 18
4.1 General
WARNING
If you are NOT sure how to operate the unit, contact your
installer.
WARNING
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
Children SHALL NOT play with the appliance.
Cleaning and user maintenance SHALL NOT be made by
children without supervision.
WARNING
To prevent electrical shocks or fire:
▪Do NOT rinse the unit.
▪Do NOT operate the unit with wet hands.
▪Do NOT place any objects containing water on the unit.
CAUTION
▪Do NOT place any objects or equipment on top of the
unit.
▪Do NOT sit, climb or stand on the unit.

4 | User safety instructions
Installer and user reference guide
18
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
▪Units are marked with the following symbol:
This means that electrical and electronic products may NOT be mixed with
unsorted household waste. Do NOT try to dismantle the system yourself: the
dismantling of the system, treatment of the refrigerant, of oil and of other parts
MUST be done by an authorised installer and MUST comply with applicable
legislation.
Units MUST be treated at a specialised treatment facility for reuse, recycling and
recovery. By ensuring this product is disposed of correctly, you will help to
prevent potential negative consequences for the environment and human
health. For more information, contact your installer or local authority.
▪Batteries are marked with the following symbol:
This means that the batteries may NOT be mixed with unsorted household
waste. If a chemical symbol is printed beneath the symbol, this chemical symbol
means that the battery contains a heavy metal above a certain concentration.
Possible chemical symbols are: Pb: lead (>0.004%).
Waste batteries MUST be treated at a specialised treatment facility for reuse. By
ensuring waste batteries are disposed of correctly, you will help to prevent
potential negative consequences for the environment and human health.
4.2 Instructions for safe operation
CAUTION
During operation, NEVER check or clean the unit. It may
cause electrical shock. Do NOT touch the rotating parts, it
will cause injury.
CAUTION
This unit is equipped with electrically powered safety
measures that are required when connected to an EKVDX.
In order to be effective, the installed unit MUST be
electrically powered at all times, except for short service
periods.
CAUTION
Before accessing, make sure to turn OFF the operation
switch and disconnect the power.

4 | User safety instructions
Installer and user reference guide
19
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
WARNING
Stop operation and shut OFF the power if anything
unusual occurs (burning smells etc.).
Leaving the unit running under such circumstances may
cause breakage, electrical shock or fire. Contact your
dealer.

5 | User interface
Installer and user reference guide
20
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
5 User interface
This operation manual offers a non-exhaustive overview of the main functions of
the system.
Detailed information on required actions to achieve certain functions can be found
in the dedicated installation and operation manual of the indoor unit.
Refer to the operation manual of the installed controller.