Daikin BRC1H62W User manual

Wired Remote
Controller
Operation Manual
• Thank you for purchasing this wired remote controller.
• This manual describes safety measures which should be considered during the use of
this product.
Read this manual carefully and be sure you understand the information provided
before using the product.
Keep this manual where it is readily accessible to all current and future operators.
MODEL BRC1H62W/BRC1H62K
+
-

1
Contents
Safety Precautions ............................................................. 2
Button Locations and Descriptions..................................... 4
Overview of Screens .......................................................... 5
Setting Screen List ............................................................. 6
Names and Functions ........................................................ 7
Information Screen ............................................................. 9
Setpoint ............................................................................ 13
Ventilation Rate ................................................................ 14
User Menu........................................................................ 15
Operation Mode................................................................ 16
Fan Speed ........................................................................ 18
Airow............................................................................... 20
Energy Recovery Ventilator (ERV).................................... 23
LED Brightness Light Ring On ......................................... 25
LED Brightness Light Ring Off ......................................... 26
Setpoint ............................................................................ 27
Fahrenheit/Celsius............................................................ 28
Administrator Menu .......................................................... 29
Backlight Brightness/Contrast .......................................... 30
Clock Setting .................................................................... 31
Bluetooth .......................................................................... 33
About ................................................................................ 36
Administrator Password Setting........................................ 37
Maintenance..................................................................... 39
Filter Sign ......................................................................... 40
Troubleshooting ................................................................ 43

2
Safety Precautions
This product is not intended for use by children or inrm persons without supervision.
Children should be supervised to ensure that they do not play with the product.
Read the safety precautions carefully for the proper use of the product.
• This manual classies the precautions into WARNINGS and CAUTIONS.
Be sure to follow all the precautions below: They are all important for ensuring safety.
WARNING Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
It may also be used to alert against unsafe practices.
WARNING
• Do not install the remote controller by yourself.
Improper installation may result in electric shocks or a re.
Consult your local dealer.
• Do not modify or repair the remote controller.
It may result in electric shocks or a re.
Consult your local dealer.
• Do not relocate or reinstall the remote controller by yourself.
Improper installation may result in electric shocks or re.
Consult your local dealer.
• Do not use ammable materials such as hairspray or insecticide near the product.
It may result in electric shocks or a re.
• Do not wipe the product with benzine, thinner, chemical dust cloth, etc.
The product may get discoloured or the coating peeled off.
The use of organic solvents may cause cracking of the product, electric shocks or a re.
CAUTION
• Do not allow children to play with the remote controller.
Accidental operation by children may result in health impairment.
• Do not disassemble the product.
Touching the interior parts may result in electric shocks or a re.
Consult your local dealer for internal inspections and adjustments.
• Do not press the button of the remote controller with a hard, pointed object.
The remote controller may be damaged.
• Do not pull or twist the electric wire of the remote controller.
It may cause the unit to malfunction.
• Do not operate with wet hands to avoid electric shocks or a re.
• Do not wash the remote controller.
It may cause electric leakage and result in electric shocks or a re.
• Do not locate the remote controller wherever there is a risk of wetting.
If water gets into the remote controller there is a risk of electric leakage and damage to electronic
components.
It may result in electric shocks or a re.
— Items to be Strictly Observed —

3
Disposal requirements
Your product and the batteries supplied with the controller are marked with this symbol. This symbol
means that electrical and electronic products and batteries shall not be mixed with unsorted household
waste.
For batteries, a chemical symbol can be printed beneath the symbol. This chemical symbol means that
the battery contains a heavy metal above a certain concentration.
Possible chemical symbols are:
Pb: lead (>0.004%)
Do not try to dismantle the system yourself: the dismantling of the product, treatment of the refrigerant,
of oil and of other parts must be done by a qualied installer in accordance with relevant local and
national legislation.
Units and waste batteries must be treated at a specialized treatment facility for re-use, recycling and
recovery.
By ensuring correct disposal, you will help to prevent potential negative consequences for the
environment and human health.
Please contact the installer or local authority for more information.

4
Button Locations and Descriptions
a
b
c
d
e
f
+
-
Functions items (i.e., Operation Mode, Fan Speed, and Setpoint) are set from the menu
screen.
NOTICE
• Do not install the remote controller in places exposed to direct sunlight. The LCD may be
damaged.
• Do not pull or twist the remote controller cord. The remote controller may be damaged.
• Do not use objects with sharp ends to press the buttons on the remote controller. Damage may
result.
a ON/OFF button
• Press this button to turn on the system.
• Press this button again to turn o the system.
b Status indicator (LED)
• During operation, the light ring around the display lights up blue/red/green.
Lights up blue: Operating, Blinks red: Error is occurring, Lights up/blinks green: Bluetooth connecting
c LCD (Refer to INFORMATION on page 6.)
• Displays the current setpoint and air conditioner operation status.
d NAVIGATE/ADJUST button
• Navigate right.
• Adjust a setting.
e SELECT/ACTIVATE/SET button
• From the home screen, enter the user menu.
• From the user menu, enter one of the submenus.
• From their respective submenu, activate an operation/ventilation mode.
f NAVIGATE/ADJUST button
• Navigate left.
• Adjust the setting.

5
Overview of Screens
How to display the screen
The following is just an example. The items available for setting vary depending on the
indoor unit you are using. If there is no button operation for about 10 seconds, the screen
returns to the home screen.
Home screen
30 ˚C
28
˚C
Press
User menu
This screen is a
menu for the user.
See the next page
for items which can
be selected.
Administrator menu
This screen is a menu
for the administrator.
See the next page for
items which can be
selected.
Information screen
Sensor view
12:34
30
˚C
32
˚C
1050PPM
A3-01 (Unit 00)
This screen displays the sensor values.
If there are no sensors, a horizontal bar (“–”) is
displayed.
Choose which items are displayed by setting from
the remote controller.
This screen is not displayed by factory default. If it
is not displayed, the icon view will be shown instead.
Icon view
12:34
A3-01 (Unit 00)
This screen displays the time and the status of
the remote controller and the system. If an error
occurs, the error code is displayed.
Select , then press .
Press
Select , then
press .
Press and hold
for 5 seconds.
Press and hold
and for 5seconds.
Press
/

6
Setting Screen List
Setting list User
menu
Administrator
menu
Icon Name Description
Depends on
current setting Operation Mode Operation mode setting 
Depends on
current setting Fan Speed Airflow rate setting 
Depends on
current setting Airflow Direction Airflow direction 1 setting 
Depends on
current setting Vertical Airflow Airflow direction 2 setting 
Depends on
current setting Ventilation Mode Ventilation mode setting 
Depends on
current setting Ventilation Rate Ventilation rate setting 
Adjust LED (ON) LED brightness adjustment when
backlight lights up 
Adjust LED (OFF) LED brightness adjustment when
backlight lights up dimly 
Sign Reset Filter sign reset 
Celsius/Fahrenheit Fahrenheit/Celsius changeover 
Setpoint Setpoint setting when in auto
operation mode 
Bluetooth Setting Bluetooth setting 
Backlight Backlight brightness setting 
Contrast Contrast setting 
Clock Setting Clock setting 
About Administrator information 
Admin Password Administrator password setting 

7
Names and Functions
Home screen
30 ˚C
28
OFF
b
a
h
g
f
j
k
i
c
d
e
l
Information screen
12:34
A3-01 (Unit 00)
qn
p
o
m
Icon view
12:34
30
˚C
32
˚C
1050PPM
A3-01 (Unit 00)
qn
p
r
m
Sensor view
User menu/Administrator menu
s
User menu
s
Administrator menu
* The Bluetooth® word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc. and use of such marks by
Daikin industries, LTD. is under license. Other trademarks and
trade names are those of their respective owners.
Screen display explanation
a OFF
• Displayed when operation is stopped.
b Error/Filter/Test/Streamer icon
• Error, lter, test and streamer icons
are displayed.
• The streamer icon is displayed
when Mold Proof operation is active.
c Centralized Control
• Displayed when under centralized
management.
d Operation mode
• Displays the current operation mode.
e Ventilation mode
f Room temperature
• Displays the current room temperature.
g Setback
• Blinks during setback operation.
• Displayed during setback setting.
h Bluetooth*
• Indicates that the controller is
communicating with a mobile
device, for use with the app.
i Changeover Under Control
• Displayed when controller is
unauthorized to select heating/
cooling operation.
j Fahrenheit/Celsius
• Depending on the setting, Fahrenheit/
Celsius display can be selected.
k Air Purifying
l Set temperature
• Displays setpoint temperature.
m Clock (24 hours time display)
n
MAIN/SUB remote controller sign
• : Main controller
: Sub controller
o Status
• Noties the status.
p Error display
• If an error occurs, the icon, an error
code and unit number are displayed.
q Information icon
r Sensor values
• If there are no sensors, a horizontal
bar (“–”) is displayed.
s Settings menu icon

8
INFORMATION
Depending on the connected model, some items may not be displayed.
The controller is equipped with a power-saving function that darkens the display if there is no operation
for a certain period of time. To make the screen light up again, press one of the buttons.
Note that pressing one of the buttons will only make the display bright again, not cause remote
controller operation.

9
Information Screen
The functions of the connected indoor unit are displayed as icons.
How to display the information screen
Home screen
30 ˚C
28
˚C
Press and hold on the Home screen for 5 seconds.
Information screen
The screen switches to the
Information screen.
Only displayed when sensor
view is enabled.
When enabled:
The screen switches from
the home screen to the
sensor view screen.
When disabled:
The screen switches from
the home screen to the icon
view screen.
Sensor view
12:34
30
˚C
32
˚C
1050PPM
A3-01 (Unit 00)
Icon view
12:34

10
How to exit the information screen
Information screen
Press or there is no
button operation for about
10seconds, the screen
returns to the home screen.
Only displayed when sensor
view is enabled.
When enabled:
The screen switches from
the home screen to the
sensor view screen.
When disabled:
The screen switches from
the home screen to the icon
view screen.
Sensor view
12:34
30
˚C
32
˚C
1050PPM
A3-01 (Unit 00)
Icon view
12:34

11
About icons on the information screen
The items displayed vary depending on the indoor unit you are using.
Icon Name Description
Information Indicates an information screen.
MAIN/SUB remote
controller
Displayed when used as the MAIN/SUB remote controller.
1=main, 2=sub
Bluetooth* Indicates that the controller is communicating with a
mobile device, for use with the app.
Setback Indicates that the indoor unit is operating under setback
conditions.
A function to keep the room comfortable when the a/c is
off by automatically turning on the unit when the
temperature exceeds setback setpoint.
Centralized Control Indicates that the system is controlled by central control
equipment (optional accessory) and that control of the
system by the controller is limited.
Changeover Under
Control (VRV only)
Displayed:
The remote controller does not have master control.
Unable to select heating/cooling operation.
* Immediately after the start of operation, this icon may not
be displayed on the information screen even if the
remote controller does not have master control. If you
want to check if the remote controller has master control,
confirm on the home screen.
Blinking:
None of the remote controllers in the system have master
control.
Can be set as the master controller during this time.
Not Displayed:
The remote controller has master control.
Able to select heating/cooling operation.
Backup Indicates that backup operation is being carried out.
Energy savings Indicates that the system’s energy consumption is being
limited, and that it is running with restricted capacity.
Test operation Indicates that Test Operation mode is active.
Defrost/Hot start Indicates that the defrost/hot start mode is active.
Self-cleaning filter
operation
Indicates that selfcleaning filter operation is active.

12
Icon Name Description
24-hour ventilation Indicates that 24-hour ventilation is set.
* May not be displayed even if connected to a unit with
this function.
Night purge Indicates that night purge is set.
Ventilating standby Indicates that ventilating operation has been stopped
temporarily. (In order to reduce energy loss, ventilating
operation is stopped immediately after cooling or heating
operation starts).
Ventilating
operation
Indicates that ventilating operation is being carried out
even when operation is stopped, if 24-hour ventilation and
night purge are set.
Pre Vent (Fresh-up) Indicates that ventilating is being carried out powerfully
due to a large difference in the incoming airflow rate and
exhaust airflow rate.
Outdoor
temperature
Indicates the type of sensor value.
Room temperature
Room humidity
Outdoor humidity
CO2concentration
Warning Indicates that an error occurred, or that an indoor unit
component needs to be maintained.
* The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
and use of such marks by Daikin industries, LTD. is under license. Other trademarks and trade
names are those of their respective owners.

13
Setpoint
The setpoint is the range of the available temperature for the Cooling, Heating, and Auto
operation modes.
How to set the setpoint
Prerequisite: The active operation mode is either “Cooling”, “Heating”, or “Auto”.
Home screen
30 ˚C
28
˚C
The small number above displays the room temperature,
and the large number below displays the setpoint.
Be sure to operate with the remote controller turned on.
When operation is stopped, even if or are pressed,
the setpoint cannot be changed.
Change setpoint screen
30 ˚C
28
˚C
30 ˚C
26
˚C
Press and , and the setpoint will change.
Result:
The indoor unit changes temperature equal to the
setpoint value.

14
Ventilation Rate
If only a total heat exchanger is connected, set the ventilation rate from the home screen.
The ventilation rate can be set in the user menu when linked with an air conditioner.
How to set the ventilation rate
Home screen
30 ˚C
The small number above displays the room temperature,
and the icon below displays the ventilation rate.
Be sure to operate with the remote controller turned on.
Change ventilation
rate screen
30 ˚C30 ˚C
30 ˚C
Press and , and the ventilation rate will change.
Result:
The indoor unit changes ventilation rate.

15
User Menu
How to display the user menu
Home screen
30 ˚C
28
˚C
Press on the Home screen.
User menu screen
The screen switches to the User menu screen.
How to exit the user menu
User menu screen
Press or to select “ ”, then press to apply.
Or if there is no button operation for about 5seconds, the
screen returns to the home screen.

16
Operation Mode
From the home screen, press to enter the user menu. Use and to navigate
through the menus. Press again to enter one of the menus.
INFORMATION
• Available menus are depend on type of indoor unit that user operating.
• In the user menu, the icon for each menu reects the current active setting or mode. When
operating the controller, the menu that navigate through may look dierent from that represented
menus this manual.
• The controller only allows for basic operation of the system. For advanced operation (setback
etc.), see in mobile application.
How to set the operation mode
User menu screen
Navigate to the operation mode menu.
Operation mode screen
Press or to select an operation mode and press to
activate.
Operation modes which can be selected vary depending
on the system.
Result:
The indoor unit changes its operation mode and the
controller returns to the home screen.

17
About icon list of Operation Modes
The indoor unit can operate in various operation modes.
Icon Operation mode Icon Operation mode
Auto
Icons vary depending on the
system.
Fan only
Cool Ventilation + Air Clean
Heat Ventilation
Dry Air Clean
INFORMATION
Available operation mode are depend on indoor unit.
Characteristics of Heat Mode
The system automatically controls the following operating modes to prevent the
reduction of heating capacity and space comfort.
Defrost operation • The system will automatically go into defrost operation to prevent frost
accumulation at the outdoor unit and subsequent loss of heating
capacity.
• The indoor unit fan will stop, and “
STANDBY
” will be displayed on the
remote controller.
• The system will nish the Defrost operation and return to normal
usually within six to eight minutes. It won’t last for more than ten
minutes.
Hot start • When the system starts heating operation, the indoor unit fan will
operate with a delay in order to prevent a cold draft.
(In that case, “
STANDBY
” will be displayed on the remote controller.)

18
Fan Speed
How to set the fan speed
Prerequisite: The active operation mode is either “Cooling”, “Heating”, “Auto” or “Fan”.
User menu screen
Navigate to the fan speed menu.
Depending on the system, this function may not be
displayed.
Fan speed screen
The setting of the fan speeds will vary based upon the
indoor unit model.
Press or to adjust the fan speed and to conrm.
Fan speeds which can be selected vary depending on the
system.
2 fan speeds
Auto Low High
3 fan speeds
Auto
High
Low
Medium

19
5 fan speeds
Auto
High
Low
Medium High
Medium Low
Medium
• For mechanical protection purposes, it is possible that
the indoor unit switches itself to “Automatic fan speed”
mode.
• If fan stops operating, always not mean system failure.
The fan can stop operating at any time.
• There may be a delay between the fan speed setting
made on the controller and the change actually carried
out by the indoor unit.
Result:
Fan speed of indoor unit has changed and the controller
returns to the home screen.