DAKtel myhomefone User manual

Personal Security
Communicator
Goes everywhere you go
Quickstart guide
Everything you need to get you set up
myhomefone.com.au

Package Contents
Handset Base Belt clip

Plug USB cableLanyard

Personal Security Communicator
Device
Red LED
Memory
Buons
(Speed Dial)
Front
LEDs
Green LED
ON/OFF buon Blue LED
Baery/SIM
card cover
Microphone
SOS Buon
Speaker
Charging Contacts

Personal Security Communicator
Base
Red LED
Charging
Contacts
DC
Power Input
USB Cable Input

Making a call with the speed-dial numbers:
Your Personal Security Communicator has two preset
speed-dial numbers for non-emergency calls (M1 & M2).
Press either of these buttons to begin a call and hold down
to cancel. The top green LED will light up during a call.
For your convenience, write the names of your speed-dial
contacts here.
Using Your Personal
Security Communicator
is set up to call
is set up to call
M
M

Sending an SOS request:
Push the SOS button to immediately start an emergency call:
>up to 6 nominated numbers are stored
>it will try each contact 3 times
>if unanswered, it will try the next contact
>the receiver will be prompted to accept the emergency call by
a voice recording
>The top green LED will light up during the call
NB: If you have chosen a Professional Monitoring service, your
device will immediately dial our 24/7 call centre who will assist you.
Answering a call:
Press the SOS button.
Should you fall:
Should the device sense a fall, it will automatically initiate an SOS call.
Charging the device:
Sit the communicator in the charging base. The top red light will
light up when the device is on charge. We suggest you keep the
charging base by the bedside and charge every night.

Turning the device on:
>Press and hold the ON/OFF button for
2-3 seconds
>Blue LED starts flashing
>The LED will blink quickly while
searching for the network
>You will hear a voice say
“Device is connected”, and the LED will
flash slowly
Turning the device off
Press and hold the ON/OFF button for
2-3 seconds and release. You will hear a
chime, and the device will vibrate
as it switches off.
Checking network connectivity
When the device is on, press the ON/
OFF button once, to hear a voice
announcement.

What do the lights mean?
Will light up during a call.
Will light up when the device is on charge or when the battery is low.
Top Green LED
Top Red LED
Flashes fast when there is no network connection.
Flashes slow when connected to network.
Side Blue LED
Slow flash in standby.
Flash in a circle during incoming call.
Will light steady when in a call.
Will light when power is connected.
Front Orange
LEDs
Charger
Red LED

Baery Performance
Low Battery
>When the battery is getting low, a voice announcement will be heard from the
device to charge the unit.
>The device will send automatic SMS messages through to either the monitoring
centre (for those who have chosen professional monitoring), or to a nominated
number (self-monitored customers).
>The voice announcement will prompt every 5 minutes for 1 hour, before the
device turns off.
>Please action this prompt immediately, if you have professional monitoring
the call centre will follow procedure to contact you.
Standby Time
Approximately 68 hours, depending on network.
Talk Time
Approximately 3 hours.

Monitoring Settings
Professional Monitoring
If you have chosen professional monitoring for your Communicator, please ensure
that your contact listings, numbers and medical details are always up-to-date.
To check your current details or update any information, please call 1300 031 107.
Self Monitoring
If you have chosen to self monitor your device, set up and updates are done
via the Daktel smartphone application. An instruction guide can be found
on our website myhomefone.com.au
If you have any questions please don't hesitate to contact us on 1300 031 107.

For more information
Call:   
or go to our website: myhomefone.com.au
Level ,  Alfred Street, North Sydney, NSW , Australia