dallmeier Panomera W Series Guide

007425 | REV. 2.0.4 | 2020-11-02
COMMISSIONING
W Series

Copyright © 2020 Dallmeier electronic GmbH & Co.KG
The reproduction, distribution and utilization of this document as well as the
communication of its contents to others without express authorization is prohibited.
Oenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of a patent, utility model or design.
The manufacturer accepts no liability for damage to property or pecuniary damages
arising due to minor defects of the product or documentation, e.g. print or spelling errors,
and for those not caused by intention or gross negligence of the manufacturer.
Figures in this document may dier from the actual product.
Specications subject to change without notice. Errors and misprints excepted.
All trademarks identied by ® are registered trademarks of Dallmeier.
All trademarks identied by * are trademarks or registered trademarks of the following owners:
Google and Google Chrome of Google Inc. headquartered in Mountain View, California, USA;
JavaScript of Oracle Corporation (and/or its aliates) headquartered in Redwood Shores, California, USA;
Microsoft, Internet Explorer, Microsoft Edge and Windows of Microsoft Corporation headquartered in Redmond,
Washington, USA;
Mozilla and Firefox of Mozilla Foundation headquartered in Mountain View, California, USA;
NVIDIA and GeForce of NVIDIA Corporation headquartered in Santa Clara, California, USA.
Third-party trademarks are named for information purposes only.
Dallmeier respects the intellectual property of third parties and always attempts to ensure the complete identication of
third-party trademarks and indication of the respective holder of rights.
In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective
trademark is unprotected.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org)
and cryptographic software written by Eric Young ([email protected]).

3
COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier

5
COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
Contents
1 Validity 6
2 Documents 6
This Document 7
Other Applicable Documents 7
3 Typographical Conventions 8
4 Approvals/Certications 10
5 Safety Instructions 11
6 General Notes 14
Scope of Delivery 14
Transportation and Packaging 14
Warranty 15
Appropriate Use 15
Operation 16
Remedies at High Ambient Temperatures 17
Formation of Condensation 18
7 Requirements 20
Ambient Conditions 20
Earthing/Grounding 21
Power Supply 22
8 Maintenance, Inspection and Cleaning 23
9 Mounting, Connection and Commissioning 24
10 Connections and Pin Assignment 54
11 Conguration 56
System Requirements 56
Conguration Steps 57
Establishing the Connection (Panomera® WebCong) 58
First-Time Access (Panomera® WebCong) 59
Login (Panomera® WebCong) 60
12 Technical Product Specication (Basic Data) 62
13 Dimensions 64

6COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
1 Validity
This document applies to the following devices:
• Panomera® W Series
For reasons of simplication, the term “device” or “camera” is used in the
following.
Figures in this document may dier from the actual product.
2 Documents
The product documentation for the device consists of various documents
which are provided in printed and/or digital form, as for example via the
website www.dallmeier.com.
Read the complete product documentation for the device carefully and
thoroughly before using the device. Always observe and follow the con-
tained instructions, notes and warnings as well as the technical data in the
currently valid product specication.
Keep all documents in legible condition and in a suitable location for future
reference.
Regularly check the website www.dallmeier.com for the latest product
documentation updates.

7
COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
This Document
Commissioning
The document entitled “Commissioning” (this document) contains detailed
information concerning the installation, connection and commissioning of
the device as well as safety instructions and general notes.
The target audience of this document is trained system integrators (installa-
tion contractors of video security/surveillance systems).
Other Applicable Documents
Product Specication
The product specication contains detailed technical data, features and
characteristics of the device.
The target audience of the document is trained system integrators (installa-
tion contractors of video security/surveillance systems).
Conguration
The document entitled “Conguration” contains detailed information con-
cerning the conguration of the device.
The target audience of the document is trained system integrators (installa-
tion contractors of video security/surveillance systems).
Conguration – Quick Guide
The document entitled “Conguration – Quick Guide” contains the most
important steps concerning the conguration of a Panomera® multifocal
sensor system.
The target audience of the document is trained system integrators (installa-
tion contractors of video security/surveillance systems).
In this context, also note the information in the current documentations for
the following Dallmeier software applications:
• PService3
• SMAVIA Recording Server
• SMAVIA Viewing Client

8COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
3 Typographical Conventions
This document may contain various warning words and symbols that indi-
cate potential sources of danger:
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
NOTICE addresses practices not related to physical injury and indicates
measures to prevent device and/or property damage due to improper
installation, assembly, wiring, operation, conguration or maintenance of
the device.

9
COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
For reasons of clarity and readability, various text formatting elements and
types of emphasis are used in this documentation:
Instructions are indicated by arrows (➡).
➡Always carry out instructions one after the other in the sequence de-
scribed.
“Expressions” in quotation marks usually refer to individual components of
the device (housing parts, mounting elements, connections/interfaces, etc.)
or to control elements of the device’s web-based graphical user interface
(menu items, buttons, etc.).
Paragraphs in italics provide information on basic principles, special
features and ecient procedure as well as general recommendations.

10 COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
4 Approvals/Certications
The following approvals/certications were valid for the device at the time
of this document’s compilation:
• CE
• FCC
• RCM
• DIN 50130-4 compliant
Visit www.dallmeier.com for possible updates.
Note (USA)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energ
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interfer-
ence at his own expense.

11
COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
5 Safety Instructions
Only use the device if it is in technically perfect condition, according to its
intended purpose, in a safety and hazard conscious manner and in accor-
dance with the following safety instructions:
• Qualied Personnel
The mounting, connection, commissioning and conguration of the
device may only be carried out by qualied personnel.
This also applies to the maintenance, inspection and repair of the device
in compliance with the locally applicable regulations (regional and
country-specic legal requirements and standards), such as the DIN VDE
0701-0702 series of standards (VDE 0701-0702: “Inspection after repair,
modication of electrical appliances – Periodic inspection on electrical
appliances – General requirements for electrical safety”).
• Regulations
The use of video and audio security/surveillance systems is, in general,
strictly regulated.
Before using the device, inform yourself about the currently valid laws
and regulations regarding data, worker and environmental protection
and ensure compliance with them.
• System Components
Only use internal components that have been tested and approved by
Dallmeier. Inappropriate internal components may cause malfunctions,
damage and data loss and may result in the loss of warranty.
• Modications to the Device
Do not make any modications to the hardware or software of the device
that have not been tested and approved by Dallmeier. Inappropriate
modications (e.g. unapproved paintwork or housing add-ons) may
cause malfunctions, damage and data loss and may result in the loss of
warranty.

12 COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
• Product Documentation
The product documentation for the device consists of various documents
which are provided in printed and/or digital form, as for example via the
website www.dallmeier.com.
Read the complete product documentation for the device carefully and
thoroughly before using the device. Always observe and follow the con-
tained instructions, notes and warnings as well as the technical data in
the currently valid product specication.
Keep all documents in legible condition and in a suitable location for
future reference.
Regularly check the website www.dallmeier.com for the latest product
documentation updates.
• Condensation
If the device is brought from a cold to a warm environment, resulting
condensation may cause malfunctions and damage. In this case, wait
until the device has reached room temperature (up to 8 hours) before
commissioning.
• Earthing/Grounding & Equipotential Bonding
For the safety of persons (protection against dangerous contact voltages)
and devices (protection against over-voltages) as well as for the immunity
of information and communication technolog equipment to electro-
magnetic interferences (EMI), all protective measures, which are specied
by the currently applicable DIN, VDE and ISO standards and which provide
for a standard-compliant earthing/grounding and a correct equipotential
bonding of electrical and electronic devices, are mandatory and must be
fullled by all means.

13
COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
• Lightning Storms
To avoid damage to the device by electrical surge during lightning storms,
all protective measures, which are specied by the currently applicable
DIN, VDE and ISO standards and which provide for a standard-compliant
lightning protection equipotential bonding, are mandatory and must be
fullled by all means.
• Operating Conditions
Unfavorable operating conditions may shorten the lifetime of the device,
may cause malfunctions, damage and data loss and may result in the loss
of warranty. Observe the specications given in the technical data, the
operating condition requirements and the maintenance instructions.
• Foreign Bodies in the Device
If objects or liquids get into the device, immediately interrupt the power
supply to the device (e.g. switch o the corresponding circuit breaker).
Contact the sales partner responsible for your area.
• Burnt Smell from the Device
If you notice burnt smell or a formation of smoke coming from the device,
immediately interrupt the power supply to the device (e.g. switch o the
corresponding circuit breaker).
Contact the sales partner responsible for your area.
• Opening the Device
The device may only be opened by qualied personnel in a voltage-free
state for commissioning, inspection, maintenance and repair.
• Disposal of the Device
Do not dispose waste electrical and electronic equipment into the house-
hold trash.
Interrupt the power supply to the device (e.g. switch o the correspond-
ing circuit breaker) and remove all connected peripherals.
Return the device to the sales partner responsible for your area.

14 COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
6 General Notes
Scope of Delivery
The standard scope of delivery includes:
• Gloves for avoiding ngerprints
• Flexible rubber sleeve (bellows) for sealing the cable entry
• Safety cable (steel wire rope with loop and carabiner at both ends)
• Hexagon socket screw key (size 5)
• Product documentation
The scope of delivery may dier depending on the ordered equipment,
device variant or country of destination.
Transportation and Packaging
Store the original packaging for later transportation.
Dallmeier is not responsible for any damage resulting from unprofessional
or improper transportation.
The device should only be shipped in the original packaging.
If the original packaging is no longer available, ensure that the used packag-
ing suciently protects the device against damage, moisture, heat and cold.

15
COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
Warranty
The terms and conditions valid at the time the contract was signed shall
apply.
Appropriate Use
The Panomera® W Series is a multifocal sensor system for IP-based
180°/360°-video-surveillance of large scale areas from a single location,
such as production sites, logistics centers and public halls.
The Panomera® 360° multifocal sensor system allows for real-time cap-
turing of a complete half-space (half sphere) without blind spots, i.e. 360°
horizontally and 90° vertically.
The geometrically correct and almost distortion-free display of the surveil-
lance area (linearly scaled in horizontal and vertical direction) allows the
operator a seamless object tracking on the monitor and the evaluation of
the nest details even over long distances.
Built into an IP69-rated weather-proof enclosure with integrated heater and
equipped with an ambient light sensor and mechanically removable infra-
red(IR)-cut lters, the Panomera® W Series is suitable for residential, public,
commercial and industrial use in both indoor and outdoor areas during the
day and at night (24/7/365 continuous operation).

16 COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
Operation
➡Observe the following notes for operating the device:
• If the device or the cables connected to the device are located near
sources with strong radiation (e.g. radio transmitters, magnetic
elds), the video image may be distorted.
• The device is equipped with Automatic Gain Control (AGC). In low-
light conditions the image may be altered (e.g. noise). This is not a
malfunction.
• The video image quality depends on the lighting conditions and the
used monitor.
• The accuracy of the Automatic White Balance (AWB) algorithm de-
pends on the used lighting. Mixed light (consisting of articial light
and daylight) may cause color distortions (inaccurate color reproduc-
tion).
• Poor lighting can lead to an incorrect white balance.

17
COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
Remedies at High Ambient Temperatures
High ambient temperatures (higher than +30°C) and/or direct sunlight may
result in a reduced image quality due to the following factors:
• Heat Haze
Remedy:
No remedy for this situation possible.
• High Brightness Level (50k– 100k lux)
Remedy:
Enable the “Auto contrast” function for all sensors via the WebCong
user interface.

18 COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
Formation of Condensation
Condensation forms mainly due to temperature or pressure uctuations.
If the device is transported between locations with high temperature dif-
ferences, condensation may form on the outside of the housing as well as
inside the device. In this case, wait until the temperature of the device will
have slowly adapted to the ambient temperature prior to commissioning.
Pressure Equalization Element
The device is equipped with a pressure equalization element.
Pressure equalization elements are used to prevent the formation of con-
densation in sealed enclosures, where humidity normally cannot escape to
the outside.
Fig. 1: Pressure equalization element

19
COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
The built-in pressure equalization element of the device continuously equal-
izes the internal pressure of the device to the ambient pressure. Thus, the
temperature and humidity dierence between the housing interior and the
ambient air is balanced, and hence the formation of condensation is largely
prevented.
Condensation Inside the Housing
Despite the built-in pressure equalization element, a sudden drop in tem-
perature (e.g. based on heavy showers or thunderstorms) may temporarily
cause water vapor (moisture) inside the housing, resulting in condensation
on the inner surface of the dome/bubble as well as on the front glass ele-
ments of the built-in lenses.
In this case, activate the integrated heater manually (via the WebCong
user interface of the Panomera® master module) until all components are
free of condensation again.
However, note that the built-in heater cannot be activated if the internal
housing temperature has exceeded +60°C (140°F).
Condensation on the Outside of the Housing
Condensation on the outside of the housing may form temporarily – usually
in the early morning when the humidity level is high, as the ambient air is
warming faster than the outer surface of the housing.
This results in condensation on the outer surface of the polycarbonate
dome/bubble (like dew on the grass).
This phenomenon is due to physical reasons and, therefore, does not consti-
tute a defect.

20 COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
7 Requirements
Ambient Conditions
The device is designed for both indoor and outdoor use.
However, the device may not be installed and operated in environments
with:
• a large amount of dust and dirt,
• steam or oil vapors (e.g. kitchen),
• direct sunlight during a longer period of time,
• high heat radiation (e.g. radiator),
• improper ambient temperatures,
• nearby strong radiation sources (e.g. radio transmitters, magnetic elds),
• corrosive gases and liquids (e.g. salt water),
• insucient air ventilation (e.g. closed cabinet).
NOTICE
Damage to the device due to unfavorable ambient conditions
Use of the device under unfavorable ambient conditions may shorten its
lifetime and may cause malfunction or damage to the device.
➡Only install/operate the device under favorable ambient conditions.