danalock Danapad V3 User manual

Danapad V3
www.danalock.com EN

3

4
2x
2x

5

6
4x AAA

7

8

9

10

11

12

13

14

15
guide.danalock.com
The following instructions are in english. Localized versions can be
found with the QR-code below.

16
Add the Danapad in the Danalock App
Open the Danalock App and add the Danapad by selecting ”Add
device” in the menu tab. When the Danapad has been enrolled you
can pair it with your Danalock.
Go to: Menu > Accessory devices > Danapad > Pairing
and select the lock you want to control with the Danapad.

17
Set up pin codes for your Danapad
Go to: Menu > Accessory devices > Danapad > Pin codes
and choose to add a new pin code.
******

18
Controlling the Danapad
The Danapad is ready to use when it has been paired with a
Danalock or Universal Module and has been set up with one or
more pin codes.
Unlocking: Press pin code followed by unlock button. Success will
respond with a single green blink.
Locking: Press pin code followed by lock button. Success will
respond with a single green blink.

19
Dismounting

20
LED-Signals
The keypad indicates the status of several operations with dierent
colors:
LED signal LED color Status indication
Long green blink Power on. Batteries are activated
Red blink Device operation canceled/failed
Green blink Device operation successful
Constant orange light Device is ready to update
Green while performing action Device is updating