danalock Danapad V3 User manual

My accessory devices
– Danapad V3
Visit our website for more information about
Danalock products and product guides
www.danalock.com
19/09/2019

The Danalock app
The Danalock app is used as main control for all Danalock products*.
Go to App Store or Google Play to download the app.
https://play.google.com/store/apps/details?id=dk.polycontrol.ekey
Google Play
https://itunes.apple.com/dk/app/danalock/id768685462
App Store
*The Danalock V3 HomeKit smart lock and its features is controlled by Apple’s HomeKit app.

Contents
My accessory devices 4
Danapad V3 5
Add to the Danalock app 6
Settings 7
Vacation mode 13
Delete 14

Page 4 | Danapad V3 app guide
My accessory devices
The functionality of your Danalock V3 can be extended by
installing accessory devices. You can nd all your currently
connected accessory devices by going to MENU > MY
ACCESSORY DEVICES.

Page 5 | Danapad V3 app guide
Danapad V3
The Danapad V3 wireless keypad lets you operate the Danalock
V3 with pin codes. When your Danalock V3 has been paired
with a Danapad V3 it can be operated with pin codes as well as
through the Danalock App.
Make sure your Danalock app and
Danalock V3 rmware are up to
date before continuing setup

Page 6 | Danapad V3 app guide
Add to the Danalock app
Make sure your Danalock V3 has the latest rmware installed.
Add the Danapad V3 in the Danalock App. Go to MENU > ADD
NEW DEVICE and select your Danapad V3.

Page 7 | Danapad V3 app guide
Settings
To change Danapad V3 settings you must be within Bluetooth range of the
device. Go to: MENU > MY ACCESSORY DEVICES. Choose the Danapad V3
from the list to view device information.
To change the settings of your Danapad V3 you need to be within
Bluetooth range of Danapad V3 and Danalock V3.

Page 8 | Danapad V3 app guide
Settings
Firmware update
Before updating the rmware, make sure that the phone is at
a sucient power level. Start updating the rmware of your
Danapad V3 by pressing FIRMWARE in the SETTINGS list of your
Danapad V3. The App checks installed rmware and updates it if
there is a newer one available.
It is important that you keep your phone near the Danapad V3
during the rmware update process.

Page 9 | Danapad V3 app guide
Settings
Pair device
Select PAIRING in the SETTINGS list. You will be presented with a
list of all your Danalock devices that are supported and in range.
Select the device you want to pair with your Danapad V3 and
wait for the app to complete the pairing.

Page 10 | Danapad V3 app guide
Settings
Create a pin code
In the Danapad V3 settings select PIN CODES. Create a new pin
code by pressing the ADD button.
Enter a pin code combination between 4 –10 digits and select if
the pin code should be permanent or temporary.
Temporary pin codes
Temporary pin codes are active in a
single time interval. With this access
type, you dene the interval in which
you want the pin codes to work.
Permanent pin codes
Permanent pin codes are always
active.