Danfoss ECL Comfort 310 User manual

OperatingGuide
ECLComfort310,applicationP330
1.0TableofContents
1.0TableofContents...............................................1
1.1Importantsafetyandproductinformation.....................2
2.0Installation........................................................
2.1Beforeyoustart.....................................................5
2.2Identifyingthesystemtype......................................12
2.3Mounting...........................................................31
2.4Placingthetemperaturesensors................................35
2.5Electricalconnections.............................................37
2.6InsertingtheELApplicationKey..............................50
2.7hecklist............................................................56
2.8Navigation,ELApplicationKeyP330.........................57
3.0Dailyuse.........................................................62
3.1Howtonavigate...................................................62
3.2Understandingthecontrollerdisplay..........................63
3.3Ageneraloverview:Whatdothesymbolsmean?...........66
3.4Monitoringtemperaturesandsystem
components........................................................67
3.5Influenceoverview................................................68
3.6Manualcontrol.....................................................69
3.7Schedule............................................................70
4.0Settingsoverview............................................71
.0Settings...........................................................73
5.1IntroductiontoSettings..........................................73
5.2Flowtemperature..................................................74
5.3Roomlimit..........................................................77
5.4Returnlimit.........................................................79
5.5Flow/powerlimit.................................................83
5.6Optimization........................................................86
5.7ontrolparameters................................................91
5.8Application.........................................................94
5.9Tanktemperature................................................101
5.10Anti-bacteria......................................................107
5.11Alarm..............................................................109
6.0Commoncontrollersettings............................111
6.1Introductionto‘ommoncontrollersettings’..............111
6.2Time&Date.......................................................113
6.3Holiday............................................................114
6.4Inputoverview...................................................116
6.5Log.................................................................117
6.6Outputoverride..................................................118
6.7Keyfunctions.....................................................119
6.8System.............................................................121
7.0Miscellaneous................................................128
7.1EA30/31setupprocedures.................................128
7.2Overridefunction................................................136
7.3Severalcontrollersinthesamesystem......................139
7.4Frequentlyaskedquestions....................................142
7.5Definitions........................................................145
7.6Type(ID6001),overview.......................................148
7.7ParameterIDoverview..........................................149
©Danfoss|2017.08VI.GU.O3.02|1

1.1Importantsafetyandproductinformation
1.1.1Importantsafetyandproductinformation
ThisOperatingGuideisassociatedwithELApplicationKeyP330
(ordercodeno.087H3840).
ThefunctionsarerealizedinELomfort310foradvanced
solutions,e.g.M-bus,ModbusandEthernet(Internet)
communication.
P330applicationscancommunicate(viaModbusconnections)
withtheDES2.0system(DanfossEnergyontrolSystem).
PleaseseeDES2.0relatedliteratureontheDanfosswebsite:
http://heating.danfoss.com/xxDocxx/1_MNU17429744_SIT4.html.
Searchfor‘DES2.0’ .
TheapplicationP330complieswithELomfortcontrollers310as
ofsoftwareversion1.40(visibleatstart-upofthecontrollerandin
‘ommoncontrollersettings’in‘System’).
AdditionaldocumentationforELomfort310,modulesand
accessoriesisavailableonwww.ecl.doc.danfoss.com.
Applicationkeysmightbereleasedbeforealldisplaytextsare
translated.InthiscasethetextisinEnglish.
SafetyNote
Toavoidinjuryofpersonsanddamagestothedevice,itisabsolutely
necessarytoreadandobservetheseinstructionscarefully.
Necessaryassembly,start-up,andmaintenanceworkmustbe
performedbyqualifiedandauthorizedpersonnelonly.
Locallegislationsmustberespected.Thiscomprisesalsocable
dimensionsandtypeofisolation(doubleisolatedat230V).
AfusefortheELomfortinstallationismax.10Atypically.
TheambienttemperaturerangesforELomfortinoperationare:
ELomfort210/310:0-55°
ELomfort296:0-45°.
Exceedingthetemperaturerangecanresultinmalfunctions.
Installationmustbeavoidedifthereisariskforcondensation(dew).
Thewarningsignisusedtoemphasizespecialconditionsthatshould
betakenintoconsideration.
Thissymbolindicatesthatthisparticularpieceofinformationshould
bereadwithspecialattention.
2|©Danfoss|2017.08VI.GU.O3.02
OperatingGuideECLComfort310,applicationP330

Automaticupdateofcontrollersoftware(firmware):
Thesoftwareofthecontrollerisupdatedautomaticallywhenthekey
isinserted(asofcontrollerversion1.11(EL210/310)andversion
1.58(EL296)).Thefollowinganimationwillbeshownwhenthe
softwareisbeingupdated:
Progressbar
Duringupdate:
•DonotremovetheKEY
Ifthekeyisremovedbeforethehour-glassisshown,youhave
tostartafresh.
•Donotdisconnectthepower
Ifthepowerisinterruptedwhenthehour-glassisshown,the
controllerwillnotwork.
AsthisOperatingGuidecoversseveralsystemtypes,specialsystem
settingswillbemarkedwithasystemtype.Allsystemtypesareshown
inthechapter:'Identifyingyoursystemtype'.
°(degreeselsius)isameasuredtemperaturevaluewhereasK
(Kelvin)oftenisusedfortemperaturedifferences.
TheIDno.isuniquefortheselectedparameter.
ExampleFirstdigitSeconddigitLastthreedigits
1117411174
-ircuit1Parameterno.
1217412174
-ircuit2Parameterno.
IfanIDdescriptionismentionedmorethanonce,itmeansthatthere
arespecialsettingsforoneormoresystemtypes.Itwillbemarked
withthesystemtypeinquestion(e.g.12174-A266.9).
ParametersindicatedwithanIDno.like"1x607"meanauniversal
parameter.
xstandsforcircuit/parametergroup.
VI.GU.O3.02©Danfoss|2017.08|3
OperatingGuideECLComfort310,applicationP330

DisposalNote
Thisproductshouldbedismantledanditscomponents
sorted,ifpossible,invariousgroupsbeforerecycling
ordisposal.
Alwaysfollowthelocaldisposalregulations.
4|©Danfoss|2017.08VI.GU.O3.02
OperatingGuideECLComfort310,applicationP330

2.0Installation
2.1Beforeyoustart
The14differentapplicationsP330.1...P330.14areheatingand
DHWapplicationsinvariouscombinations.
Thebasicprinciplesforaheatingcircuit
(examplereferringtoP330.1)
Typically,theflowtemperatureisadjustedaccordingtoyour
requirements.
TheflowtemperaturesensorS3isthemostimportantsensor.The
desiredflowtemperatureatS3iscalculatedintheELcontroller,
basedontheoutdoortemperature(S1)andthedesiredroom
temperature.Thelowertheoutdoortemperature,thehigherthe
desiredflowtemperature.
Bymeansofaweekschedule(upto3'omfort'periods/day),
theheatingcircuitcanbein'omfort'or'Saving'mode(two
differenttemperaturevaluesforthedesiredroomtemperature).
ThemotorizedcontrolvalveM1isopenedgraduallywhenthe
flowtemperatureislowerthanthedesiredflowtemperatureand
viceversa.
Thereturntemperature(S5)canbelimited,forexamplenottobe
toohigh.Ifso,thedesiredflowtemperatureatS3canbeadjusted
(typicallytoalowervalue),thusresultinginagradualclosingof
themotorizedcontrolvalve.Furthermore,thereturntemperature
limitationcanbedependentontheoutdoortemperature.
Typically,thelowertheoutdoortemperature,thehigherthe
acceptedreturntemperature.Inboiler-basedheatingsupplythe
returntemperatureshouldnotbetoolow(sameadjustment
procedureasabove).
Aflow/powerlimitationcanbearrangedbyusinganM-busbased
signalfromaflow/heatmeter.Furthermore,thelimitationcanbe
inrelationtotheoutdoortemperature.
Ifthemeasuredroomtemperature,S13orviatheremotecontrol
unitEA30doesnotequalthedesiredroomtemperature,the
desiredflowtemperaturecanbeadjusted.
Generalinformation:
In’Saving’modetheheatingcanbereducedortotallyswitched
off.The‘Frostprotection’modemaintainsaselectableflow
temperature,forexample10°.
Thecirculationpump(P2)isONatheatdemandoratfrost
protection.
TheheatingcanbeswitchedOFFwhentheoutdoortemperatureis
higherthanaselectablevalue.
Thedesiredflowtemperatureofheatingcircuit1can,viaS8,be
controlledbymeansofanexternalvoltageintherange0-10volt.
Exerciseofcirculationpumpandcontrolvalvecanbearranged.
ApplicationP330.1:
Theshowndiagramisafundamentalandsimplifiedexampleanddoes
notcontainallcomponentsthatarenecessaryinasystem.
AllnamedcomponentsareconnectedtotheELomfortcontroller.
Listofcomponents,forexampleheatingcircuit1(P330.1):
S1Outdoortemperaturesensor
S3Flowtemperaturesensor
S(Optional)Returntemperaturesensor
S8(Optional)Externaltemperaturecontrol,notillustrated
S13(Optional)Roomtemperaturesensor
M1Motorizedcontrolvalve
P2Circulationpump
A1Alarm
VI.GU.O3.02©Danfoss|2017.08|5
OperatingGuideECLComfort310,applicationP330

ThebasicprinciplesforaDHWcircuit,type1
(examplereferringtoP330.4)
Bymeansofaweekschedule(upto3'omfort'periods/day),the
DHWcircuitcanbein'omfort'or'Saving'mode(twodifferent
temperaturevaluesforthedesiredDHWtemperatureatS10).
TheDHWheatingtemperaturesensorS9isthemostimportant
sensor.IfthemeasuredDHWtemperature(S10)getslowerthanthe
desiredDHWtemperature,theDHWheatingpump(P7)isswitched
ON.Themotorizedcontrolvalve(M3)iscontrolledinorderto
maintaintheDHWheatingtemperatureatS9.TheDHWheating
temperatureisdeterminedbythedesiredDHWtemperatureatS10
plusthechargingdifference.WhentheDHWheatingtemperature
isreached,theDHWchargingpumpP5isswitchedON.TheDHW
heatingtemperatureatS9istypically5–10degreeshigherthan
thedesiredDHWtemperature.
DHWtankwith1temperaturesensor(S10):
WhenthemeasuredDHWtemperature(S10)getshigherthanthe
desiredDHWtemperature,theDHWheatingpump(P7)andthe
DHWchargingpump(P5)areswitchedOFF.Thepost-runtimecan
besetindividually.
DHWtankwith2temperaturesensors(S10,upperandS2,
lower):
IfthemeasuredDHWtemperature(S10)getshigherthanthe
desiredDHWtemperatureandthetemperature(atS2)getshigher
thanthecut-outtemperature,theDHWheatingpump(P7)and
theDHWchargingpump(P5)areswitchedOFF.Thepost-runtime
canbesetindividually.
TheDHWcirculationcanbethroughtheDHWtank(connectionA)
orthroughtheheat-exchanger(connectionB).Thesolutionwith
connectionAresultsinclosingofthemotorizedcontrolvalveafter
theDHWtankchargingprocedure.Thesolutionwithconnection
BisusedtocompensatefortheheatlossintheDHWcirculation
pipe.Furthermore,afterDHWtankcharging,theDHWheating
temperature(atS9)iscontrolledaccordingtothedesiredDHW
temperature.
Thereturntemperature(S7)canbelimited,forexamplenottobe
toohigh.Ifso,thedesiredflowtemperatureatS9canbeadjusted
(typicallytoalowervalue),thusresultinginagradualclosingofthe
motorizedcontrolvalve.Inboiler-basedheatingsupplythereturn
temperatureshouldnotbetoolow(sameadjustmentprocedure
asabove).
Aflow/powerlimitationcanbearrangedbyusinganM-busbased
signalfromaflow/heatmeter.
Generalinformation:
The‘Frostprotection’modemaintainsaselectabletemperature,
forexample10°.
Ananti-bacteriafunctionisavailableforactivationonselected
daysoftheweek.
TheoutdoortemperaturesensorS1isusedtoprotectthe
circulationcircuitagainstfrost.
TheDHWcirculationpump(P8)hasaweekscheduleforupto3
ONperiodsperday.
ApplicationP330.4:
Theshowndiagramisafundamentalandsimplifiedexampleanddoes
notcontainallcomponentsthatarenecessaryinasystem.
AllnamedcomponentsareconnectedtotheELomfortcontroller.
Listofcomponents,forexampleDHWcircuit,type1(P330.4):
S1Outdoortemperaturesensor
S2(Optional)LowerDHWtanktemperaturesensor
S7(Optional)Returntemperaturesensor
S9Flowtemperaturesensor
S10UpperDHWtanktemperaturesensorr
M3Motorizedcontrolvalve
PDHWchargingpump
P7DHWheatingpump
P8DHWcirculationpump
A1Alarm
6|©Danfoss|2017.08VI.GU.O3.02
OperatingGuideECLComfort310,applicationP330

ThebasicprinciplesforaDHWcircuit,type2
(examplereferringtoP330.5)
Bymeansofaweekschedule(upto3'omfort'periods/day),the
DHWcircuitcanbein'omfort'or'Saving'mode(twodifferent
temperaturevaluesforthedesiredDHWtemperatureatS10).
WhenthemeasuredDHWtemperature(S10)getslowerthanthe
desiredDHWtemperature,theDHWheatingpump(P7)andthe
DHWchargingpump(P5)areswitchedON.
DHWtankwith1temperaturesensor(S10):
WhenthemeasuredDHWtemperature(S10)getshigherthanthe
desiredDHWtemperature,theDHWheatingpump(P7)andthe
DHWchargingpump(P5)areswitchedOFF.Thepost-runtimecan
besetindividually.
DHWtankwith2temperaturesensors(S10,upperandS2,
lower):
WhenthemeasuredDHWtemperature(S10)getshigherthanthe
desiredDHWtemperatureandthetemperature(atS2)getshigher
thanthecut-outtemperature,theDHWheatingpump(P7)and
theDHWchargingpump(P5)areswitchedOFF.Thepost-runtime
canbesetindividually.
TheDHWcirculationcanbethroughtheDHWtank(connectionA)
orthroughtheheat-exchanger(connectionB).Thesolutionwith
connectionAresultsinclosingofthemotorizedcontrolvalveafter
theDHWtankchargingprocedure.Thesolutionwithconnection
BisusedtocompensatefortheheatlossintheDHWcirculation
pipe.AfterDHWtankcharging,theDHWchargingpumpP5stops.
TheheatingpumpP7continuesbeingswitchedON.
Ananti-bacteriafunctionisavailableforactivationonselected
daysoftheweek.
TheoutdoortemperaturesensorS1isusedtoprotectthe
circulationcircuitagainstfrost.
TheDHWcirculationpump(P8)hasaweekscheduleforupto3
ONperiodsperday.
Generalinformation:
The‘Frostprotection’modemaintainsaselectabletemperature,
forexample10°.
ApplicationP330.:
Theshowndiagramisafundamentalandsimplifiedexampleanddoes
notcontainallcomponentsthatarenecessaryinasystem.
AllnamedcomponentsareconnectedtotheELomfortcontroller.
Listofcomponents,forexampleDHWcircuit,type2(P330.):
S1Outdoortemperaturesensor
S2(Optional)LowerDHWtanktemperaturesensor
S10UpperDHWtanktemperaturesensor
PDHWchargingpump
P7DHWheatingpump
P8DHWcirculationpump
A1Alarm
VI.GU.O3.02©Danfoss|2017.08|7
OperatingGuideECLComfort310,applicationP330

Thebasicprinciplesforthemastercircuit
(examplereferringtoP330.10)
ThedesiredflowtemperatureatS3isadjustedaccordingtothe
demandfromthesub-circuits(heatingandDHWcircuits).Theflow
temperaturesensorS3isthemostimportantsensor.
ThemotorizedcontrolvalveM1isopenedgraduallywhenthe
flowtemperatureislowerthanthedesiredflowtemperatureand
viceversa.
Thereturntemperature(S5)canbelimited,forexamplenottobe
toohigh.Ifso,thedesiredflowtemperatureatS3canbeadjusted
(typicallytoalowervalue),thusresultinginagradualclosingof
themotorizedcontrolvalve.Furthermore,thereturntemperature
limitationcanbedependentontheoutdoortemperature.
Typically,thelowertheoutdoortemperature,thehigherthe
acceptedreturntemperature.
Inboiler-basedheatingsupplythereturntemperatureshouldnot
betoolow(sameadjustmentprocedureasabove).
Thecirculationpump(P1)isONatheatdemandoratfrost
protection.
Generalinformation:
Thedesiredflowtemperatureofthemastercircuitcan,viaS8,be
controlledbymeansofanexternalvoltageintherange0-10volt.
ApplicationP330.10:
Theshowndiagramisafundamentalandsimplifiedexampleanddoes
notcontainallcomponentsthatarenecessaryinasystem.
AllnamedcomponentsareconnectedtotheELomfortcontroller.
Listofcomponents,forexamplemastercircuit(P330.10):
S1Outdoortemperaturesensor
S3Flowtemperaturesensor
S(Optional)Returntemperaturesensor
S8(Optional)Externaltemperaturecontrol,notillustrated
M1Motorizedcontrolvalve
P1Circulationpump
A1Alarm
8|©Danfoss|2017.08VI.GU.O3.02
OperatingGuideECLComfort310,applicationP330

Thebasicprinciplesforthemastercircuitwithbuffer
(examplereferringtoP330.14)
Thehighestdemandfromthesub-circuits(heatingandDHW
circuits)plusadifference('Demandoffset')determinethedesired
buffertanktemperatureatS11.
Whenthemeasuredbuffertanktemperature(S11)getslowerthan
thedesiredbuffertanktemperature,thechargingpump(P1)is
switchedON.
Themotorizedcontrolvalve(M1)iscontrolledinordertomaintain
thebuffertankheatingtemperatureatS3.Themotorizedcontrol
valveisopenedgraduallywhentheflowtemperatureislowerthan
thedesiredflowtemperatureandviceversa.
TheflowtemperaturesensorS3isthemostimportantsensor.
ThedesiredtemperatureatS3isdeterminedbythedesiredbuffer
tanktemperatureatS11plusachargingtemperaturedifference.
ThebuffertankheatingtemperatureatS3istypically5–10degrees
higherthanthedesiredbuffertanktemperature.
Buffertankwith1temperaturesensor(S11):
Whenthemeasuredbuffertanktemperature(S11)getshigher
thanthedesiredbuffertanktemperature,thechargingpump(P1)
isswitchedOFF.Thepost-runtimecanbeset.
Buffertankwith2temperaturesensors(S11,upperandS12,
lower):
Whenthemeasuredupperbuffertanktemperature(S11)gets
higherthanthedesiredbuffertanktemperatureandthemeasured
lowerbuffertanktemperature(S12)getshigherthanthecut-out
temperature,thechargingpump(P1)isswitchedOFF.Thepost-run
timecanbeset.
IfS12isnotconnected,S11willbeusedforONandOFFcontrolof
thechargingpump.
Thereturntemperature(S5)canbelimited,forexamplenottobe
toohigh.Ifso,thedesiredflowtemperatureatS3canbeadjusted
(typicallytoalowervalue),thusresultinginagradualclosingof
themotorizedcontrolvalve.Furthermore,thereturntemperature
limitationcanbedependentontheoutdoortemperature.
Typically,thelowertheoutdoortemperature,thehigherthe
acceptedreturntemperature.
Inboiler-basedheatingsupplythereturntemperatureshouldnot
betoolow(sameadjustmentprocedureasabove).
Whenthemeasuredbuffertemperature(S11)getshigherthan
thedesiredbuffertemperature,thedesiredtemperatureatS3is
loweredtotypically10°.Hereafterthechargingpump(P1)is
switchedOFF.Thepost-runtimecanbeset.
ApplicationP330.14:
Theshowndiagramisafundamentalandsimplifiedexampleanddoes
notcontainallcomponentsthatarenecessaryinasystem.
AllnamedcomponentsareconnectedtotheELomfortcontroller.
Listofcomponents,forexamplemastercircuitwithbuffer(P330.14):
S1Outdoortemperaturesensor
S3Flowtemperaturesensor
S(Optional)Returntemperaturesensor
S8(Optional)Externaltemperaturecontrol,notillustrated
S11Upperbuffertanktemperaturesensor
S12(Optional)Lowerbuffertanktemperaturesensor
M1Motorizedcontrolvalve
P1Buffertankchargingpump
A1Alarm
VI.GU.O3.02©Danfoss|2017.08|9
OperatingGuideECLComfort310,applicationP330

ApplicationP330.14:
InordertoavoidadischargingoftheDHWcircuit(ahigher
DHWtemperaturegoestoalowerbuffertanktemperature)two
parameterscanbeset:
*Theparameter("Tankstartdiff.",IDno13192)determinesan
acceptabletemperaturedifferencebetweenS10andS11in
ordertostarttheDHWcharging.
*Theparameter("Tankstopdiff." ,IDno13196)determinesan
acceptabletemperaturedropofthedifferencebetweenS10
andS11inordertostoptheDHWcharging.
Generalinformation:
Thedesiredflowtemperatureofthemastercircuitcan,viaS8,be
controlledbymeansofanexternalvoltageintherange0-10volt.
10|©Danfoss|2017.08VI.GU.O3.02
OperatingGuideECLComfort310,applicationP330

ApplicationP330.1–P330.:
Heatingcircuits2,3,4andDHWcircuitscanbeconnectedafter
heatingcircuit1.ircuit1actsasmasterandcanreactonthe
sub-circuitsdemand.Ifso,thedesiredflowtemperatureatS3can
beinfluencedbythedesiredflowtemperatureatS4,S9,S10and
DHWchargingtemperaturerespectively.
Thedesiredflowtemperatureofheatingcircuit1can,viaS8,be
controlledbymeansofanexternalvoltageintherange0-10volt.
ApplicationP330.6–P330.1:
HeatingcircuitsandDHWcircuitsaretypicallyconnected
afterthemastercontrolledcircuit(M).Whenso,thedesired
flowtemperatureatS3canbeinfluencedbythedesiredflow
temperatureatS4,S9,S10andDHWchargingtemperatures.
Thedesiredflowtemperatureofthemastercircuitcan,viaS8,be
controlledbymeansofanexternalvoltageintherange0-10volt.
ApplicationP330ingeneral:
UptotwoRemoteontrolUnits,theEA30(oneforeachheating
circuit)canbeconnectedtooneELcontrollerinordertomeasure
theroomtemperatureandcontroltheELcontrollerremotely.
WhentheDHWcircuitisactiveduringthechargingprocedure,
selectedheatingcircuitscanbeclosedinordertogivehigher
prioritytotheDHWcharging.
Oneormoreconnectedfloworenergymeters(basedonM-bus
signal)canlimitthefloworenergytoasetmaximum(DHW
circuits)andinrelationtotheoutdoortemperature(heatingand
mastercircuits).
Unusedinputcan,bymeansofanoverrideswitch,beusedto
overridethescheduletoafixed'omfort'or'Saving'mode.
InputS8canbeusedtocontrolthedesiredflowtemperatureof
heatingcircuit1orthemastercircuit.Theappliedvoltagesignalin
therange0-10voltisconvertedintheELcontrollertothedesired
flowtemperature.
ModbuscommunicationtoaSADAsystemcanbeestablished.
TheM-busdatacanfurthermorebetransferredtotheModbus
communication.
Alarmrelay(R6)canbeactivated:
•iftheactualflowtemperaturediffersfromthedesiredflow
temperature.
•ifatemperaturesensororitsconnectiondisconnects/short
circuits.(See:ommoncontrollersettings>System>Raw
inputoverview).
Thecontrollerispre-programmedwithfactorysettingsthatareshown
inthe‘ParameterIDoverview’appendix.
VI.GU.O3.02©Danfoss|2017.08|11
OperatingGuideECLComfort310,applicationP330

2.2Identifyingthesystemtype
Sketchyourapplication
TheELomfortcontrollerseriesisdesignedforawiderange
ofheating,domestichot-water(DHW)andcoolingsystemswith
differentconfigurationsandcapacities.Ifyoursystemdiffers
fromthediagramsshownhere,youmaywanttomakeasketch
ofthesystemabouttobeinstalled.Thismakesiteasiertouse
theOperatingGuide,whichwillguideyoustep-by-stepfrom
installationtofinaladjustmentsbeforetheend-usertakesover.
TheELomfortcontrollerisauniversalcontrollerthatcanbe
usedforvarioussystems.Basedontheshownstandardsystems,
itispossibletoconfigureadditionalsystems.Inthischapteryou
findthemostfrequentlyusedsystems.Ifyoursystemisnotquite
asshownbelow,findthediagramwhichhasthebestresemblance
withyoursystemandmakeyourowncombinations.
SeetheInstallationGuide(deliveredwiththeapplicationkey)for
applicationtypes/sub-types.
P330.1
Twoheatingcircuits
12|©Danfoss|2017.08VI.GU.O3.02
OperatingGuideECLComfort310,applicationP330

SpecialsettingsfortypeP330.1:
Navigation:IDno.:Recommendedsetting:
Heatingcircuit(circuit2)
Heatingcircuit2canbeasub-circuittoheatingcircuit1.
Settingsforsub-circuitinordertosenddemandtocircuit1:
MENU\Settings\Application:‘SenddesiredT’1x500ON
Heatingcircuit(circuit1)
Settingsforcircuit1inordertoreactondemandinsub-circuit:
MENU\Settings\Application:'Demandoffset'110173K*
*Thisvalueisaddedtotheheatdemandvaluefromsub-circuit
VI.GU.O3.02©Danfoss|2017.08|13
OperatingGuideECLComfort310,applicationP330

P330.2
Threeheatingcircuits
SpecialsettingsfortypeP330.2:
Navigation:IDno.:Recommendedsetting:
Heatingcircuit(circuit2and3)
Heatingcircuit2and3canbesub-circuitstoheatingcircuit1.
Settingsforsub-circuit(s)inordertosenddemandtocircuit1:
MENU\Settings\Application:'SenddesiredT'1x500ON
Heatingcircuit(circuit1)
Settingsforcircuit1inordertoreactondemandinsub-circuit(s):
MENU\Settings\Application:'Demandoffset'110173K*
*Thisvalueisaddedtotheheatdemandvaluefromsub-circuit(s)
14|©Danfoss|2017.08VI.GU.O3.02
OperatingGuideECLComfort310,applicationP330

P330.3
Fourheatingcircuits.TheMVincircuit4iscontrolledby0–10V.
SpecialsettingsfortypeP330.3
Navigation:IDno.:Recommendedsetting:
Heatingcircuit(circuit2,3and4)
Heatingcircuit2,3and4canbesub-circuitstoheatingcircuit1.
Settingsforsub-circuit(s)inordertosenddemandtocircuit1:
MENU\Settings\Application:'SenddesiredT'1x500ON
Heatingcircuit(circuit1)
Settingsforcircuit1inordertoreactondemandinsub-circuit(s):
MENU\Settings\Application:'Demandoffset'110173K*
*Thisvalueisaddedtotheheatdemandvaluefromsub-circuit(s)
VI.GU.O3.02©Danfoss|2017.08|15
OperatingGuideECLComfort310,applicationP330

P330.4
TwoheatingcircuitsandoneDHWchargingcircuitwithcontrolledheatingtemperature.
SpecialsettingsfortypeP330.4:
Navigation:IDno.:Recommendedsetting:
Heatingcircuit2andDHWcircuit
Heatingcircuit2andtheDHWcircuitcanbesub-circuitstoheatingcircuit1.
Settingsforsub-circuit(s)inordertosenddemandtocircuit1:
MENU\Settings\Application:'SenddesiredT'1x500ON
Heatingcircuit(circuit1)
Settingsforcircuit1inordertoreactondemandinsub-circuit(s):
MENU\Settings\Application:'Demandoffset'110173K*
*Thisvalueisaddedtotheheatdemandvaluefromsub-circuit(s)
DHWcirculationpipe
TheDHWcirculationpipecanbeconnectedtotheDHWtankat'A'forinternal
circulationortotheheatexchangerat'B'forexternalcirculation.
(InternalDHWcirculation)MENU\Settings\Application:'ont.Tcontrol'1x054OFF
(ExternalDHWcirculation)MENU\Settings\Application:'ont.Tcontrol'1x054ON
16|©Danfoss|2017.08VI.GU.O3.02
OperatingGuideECLComfort310,applicationP330

P330.
ThreeheatingcircuitsandoneDHWchargingcircuit.
SpecialsettingsfortypeP330.5
Navigation:IDno.:Recommendedsetting:
Heatingcircuit2and3andDHWcircuit
Heatingcircuit2and3andtheDHWcircuitcanbesub-circuitstoheatingcircuit1.
Settingsforsub-circuit(s)inordertosenddemandtocircuit1:
MENU\Settings\Application:'SenddesiredT'1x500ON
Heatingcircuit(circuit1)
Settingsforcircuit1inordertoreactondemandinsub-circuit(s):
MENU\Settings\Application:'Demandoffset'110173K*
*Thisvalueisaddedtotheheatdemandvaluefromsub-circuit(s)
DHWcirculationpipe
TheDHWcirculationpipecanbeconnectedtotheDHWtankat'A'forinternal
circulationortotheheatexchangerat'B'forexternalcirculation.
(InternalDHWcirculation)MENU\Settings\Application:'ont.Tcontrol'1x054OFF
(ExternalDHWcirculation)MENU\Settings\Application:'ont.Tcontrol'1x054ON
VI.GU.O3.02©Danfoss|2017.08|17
OperatingGuideECLComfort310,applicationP330

P330.6
Onemastercircuitandoneheatingcircuitassub-circuit.
SpecialsettingsfortypeP330.6:
Navigation:IDno.:Recommendedsetting:
Themastercircuitreactsondemandinthesub-circuit.
Sub-circuit
Settingsforsub-circuitinordertosenddemandtomastercircuit:
MENU\Settings\Application:'SenddesiredT'1x500ON
Mastercircuit
Settingsformastercircuitinordertoreactondemandinsub-circuit:
MENU\Settings(M)\Application:'Demandoffset'1x0173K*
*Thisvalueisaddedtotheheatdemandvaluefromsub-circuit
18|©Danfoss|2017.08VI.GU.O3.02
OperatingGuideECLComfort310,applicationP330

P330.7
Onemastercircuitandtwoheatingcircuitsassub-circuits.
SpecialsettingsfortypeP330.7
Navigation:IDno.:Recommendedsetting:
Themastercircuitreactsondemandinthesub-circuit(s).
Sub-circuit(s)
Settingsforsub-circuit(s)inordertosenddemandtomastercircuit:
MENU\Settings\Application:'SenddesiredT'1x500ON
Mastercircuit
Settingsformastercircuitinordertoreactondemandinsub-circuit(s):
MENU\Settings(M)\Application:'Demandoffset'1x0173K*
*Thisvalueisaddedtotheheatdemandvaluefromsub-circuit(s)
VI.GU.O3.02©Danfoss|2017.08|19
OperatingGuideECLComfort310,applicationP330

P330.8
Onemastercircuitandthreeheatingcircuitsassub-circuits.TheMVincircuit3iscontrolledby0–10V.
SpecialsettingsfortypeP330.8
Navigation:IDno.:Recommendedsetting:
Themastercircuitreactsondemandinthesub-circuit(s).
Sub-circuit(s)
Settingsforsub-circuit(s)inordertosenddemandtomastercircuit:
MENU\Settings\Application:'SenddesiredT'1x500ON
Mastercircuit
Settingsformastercircuitinordertoreactondemandinsub-circuit(s):
MENU\Settings(M)\Application:'Demandoffset'1x0173K*
*Thisvalueisaddedtotheheatdemandvaluefromsub-circuit(s)
20|©Danfoss|2017.08VI.GU.O3.02
OperatingGuideECLComfort310,applicationP330