2.3 bar
(33.5 psi)/rev.
0.7 bar (10 psi)/rev. 0.15 bar (2 psi)/rev.
2 DKRCC.PI.CD0.A4.02 / 520H6074 © Danfoss A/S (AC-MCI / jmn), 2012-11
CAUTION:
Disconnect power supply before wiring connections are made or service to avoid possible electrical shock
or damage to equipment. Do never touch live parts with your ngers or with any tool.
-1 bar (Pe)(30 in.Hg)
-1 bar (Pe)(30 in.Hg)
When used acc. to UL regulations
LP, aut. reset LP, man. reset HP
LP = Low Pressure LP = Low Pressure HP = High Pressure
LP side: A-C opens on pressure drop
HP side: A-C opens on pressure rise AC 1 16 A
400 V a.c.
DC 13
12 W
220 V
AC 3 16 A
AC 15 10 A
Electrical rating – General
Short circuit protection:
Fuse 16 Amp
Contacts
Voltage FL LR Resist.
load
Pilot
duty
AC DC A A
A-B
A-C
240 — 8 48 8 A 3A
120 —16 96 16 A
—240 — — — 12 W
A-D 240 — — — — 50 VA
Use copper wire only
Tightening torque 20 lb. in.
Listed refrigeration
controller 61B5
Manual trip function
Adjustment
Convertible reset
KP15: LP/HP convertible, KP17WB: HP convertible
Insert a screwdriver into the slot on the lock disc
and turn it to desired reset conguration.
Do not turn the screw on the lock disc as it may
damage theconvertible reset mechanism.
LP man. LP auto. LP auto. LP man.
HP man HP man HP auto. HP auto.
Note: Do not select automatic reset if safety
of the system requires manual reset.
Note: Selected reset conguration may be protected
against unauthorized actions applying a seal.
TRIP:
use FINGERS ONLY!
(Do NOT use screwdriver)
Reset options
